• Journal of the Korean Applied Science and Technology
• /
• v.21 no.2
• /
• pp.174-181
• /
• 2004

Multi-walled carbon nanotubes (CNTs) were prepared by thermal chemical vapor deposition (CVD) and microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts with four transition metals such as Fe, Co, Cu, and Ni. In the preparation of CNTs from acetylene precursor by thermal CVD, the CNTs with very high yield of 43.6 % was produced over $Fe-Co/Al_2O_3$. The highest yield of CNTs was obtained with the catalyst reduced for 3 hr and the yield was decreased with increasing reduction time to 5 hr, due to the formation of $FeAl_2O_4$ metal-aluminate. On the other hand, the CNTs prepared by acethylene plasma CVD had more straight, smaller diameter, and larger aspect ratio(L/D) than those prepared by thermal CVD, although their yield had lower value of 27.7%. The degree of graphitization of CNTs measured by $I_d/I_g$ value and thermal degradation temperature were 1.04 and $602^{\circ}C$, respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.10
• /
• pp.2663-2678
• /
• 2012

Due to sharp depth transition, big holes may be found in the novel view that is synthesized by depth-image-based rendering (DIBR). A hole-filling method based on disparity map is proposed. One important aspect of the method is that the disparity map of destination image is used for hole-filling, instead of the depth image of reference image. Firstly, the big hole detection based on disparity map is conducted, and the start point and the end point of the hole are recorded. Then foreground pixels and background pixels are distinguished for hole-dilating according to disparity map, so that areas with matching errors can be determined and eliminated. In addition, parallaxes of pixels in the area with holes and matching errors are changed to new values. Finally, holes are filled with background pixels from reference image according to these new parallaxes. Experimental results show that the quality of the new view after hole-filling is quite well; and geometric distortions are avoided in destination image, in contrast to the virtual view generated by depth-smoothing methods and image inpainting methods. Moreover, this method is easy for hardware implementation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.321-321
• /
• 2008

To obtaingood resolution in PDP, one of the important factors is to achieve the accuracy of barrier ribs. The photolithographic process can be used to form patterns of barrier rib with high accuracy and a high aspect ratio. The composition for photolithography is based on the $B_2O_3-SiO_2-Al_2O_3$ glass system including additives such as alkali oxides and alkali earth oxides. The refractive index and thermal properties in glass system are changed by amount of alkali oxides and alkali earth oxides. Therefore, it is important that additives are controlled to have proper refractive index and thermal properties. The additives are contributed to non-bridging oxygen within the glass network, causing a change of density. In addition to a change of the structural cross-link density, the refractive index, dielectric and thermal properties glass are correlated with ionic radius and polarizability of cations. In this study, we investigated the refractive index and the thermal properties such as glass transition temperature, glass softening temperature and coefficient of thermal expansion by changing composition in the $B_2O_3-SiO_2-Al_2O_3$ glass system.

• Journal of the Korean Society of Visualization
• /
• v.13 no.1
• /
• pp.43-48
• /
• 2015

Collective cell migration is a fundamental phenomenon observed in various biological processes such as development, wound healing, and cancer metastasis. During the collective migration, cells undergo changes in their phenotypes from those of stable to the migratory state via the process called epithelial-mesenchymal transition (EMT). Recent findings in biology and biochemistry have shown that EMT is closely related to the cancer invasion or metastasis, but not much of the correlations in kinematics and physical forces between the neighboring cells are known yet. In this study, we aim to understand the cell migration and stress distribution within the expanding cell cluster. We constructed the in vitro cell cluster on the hydrogel, employed traction force microscopy (TFM) and monolayer stress microscopy (MSM) to visualize the physical forces within the expanding cell monolayer. During the expansion, cells at the cluster edge exhibited enhanced motility and developed focal adhesions that are the essential features of EMT while cells at the core of the cluster maintained the epithelial characteristics. In the aspect of mechanical stress, the cluster edge had the highest traction force of ~90 Pa directed toward the cluster core, which means that cells at the edge actively pull the substrate to make the cluster expansion. The cluster core of the tightly confined cells by neighboring cells had a lower traction force value (~60 Pa) but the highest intercellular normal stress of ~800 Pa because of the accumulation of traction from the edge of the monolayer.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.9
• /
• pp.702-713
• /
• 2003

The importance of protection for data and information is increasing by the rapid development of information communication and network. And the concern for protecting private information is also growing due to the increasing demand for lots of services by users. Asymmetric cryptosystem is the mainstream in encryption system rather than symmetric cryptosystem by above reasons. But asymmetric cryptosystem is restricted in applying fields by the reason it takes more times to process than symmetric cryptosystem. In this paper, encryption system which executes authentication works of asymmetric cryptosystem by means of symmetric cryptosystem. The proposed cryptosystem uses an algorithms combines that combines block cipherment with stream cipherment and has a high stability in aspect of secret rate by means of transition of key sequence according to the information of plaintext while symmetric/asymmetric cryptosystem conducts encipherment/deciphermeent using a fixed key. Consequently, it is very difficult to crack although unauthenticator acquires the key information. So, the proposed encryption system which has a certification function of asymmetric cryptosystem and a processing time equivalent to symmetric cryptosystems will be highly useful to authorize data or exchange important information.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.613-621
• /
• 2009

Except for traditional industrial art and history of design development, Korea jewelry industry before 1980's, had little meaning in the aspect of marketing and business. Domestic jewelry market which have changed from the value of goods to value of ornaments, faced important transition point for jewelry industry by the chance of in Asian Game held in 1986, and money of overseas traveler after 1980s. The rapidly-grown Jewelry field by the introduction of detail casting method to make it possible mass-production of the products before 1990's, began to change into new system, with introducing CAD/CAM after 1990's. Jewelry industry has changed from manual work called handmade to the detail casting industry based on master for mass-production. For this, the development of master, with the design development, have been suggested as important task to jewelry industry firms, and by the introduction of CAD/CAM, the diversification of design and master development has been made up. In this study, we would try to find out current status of domestic jewelry field and to understand CAD/CAM, and advantage of CAD/CAM, and through this, suggest good solution to precipitate domestic jewelry market.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6118-6127
• /
• 2012

The Mesopotamia civilization is developed by physical geography. It began from Sumer civilization at BC 3800 and finished to Assyria and Babylonia civilization at BC 600. Therefore, to examine the changing process of the city of 3,000 years standing, it is important to know the elements of the influence to the initial human civilization and city. This study analyzed the 13 cities, that the city were among the 30 the city in same age. As a result of this study, firstly, functions of the city were gradually transition from the farming culture to the functions of commerce, trade, and military. Secondly, the location of the city was gradually move into northern from southern, it is associated with features of the city. Thirdly, the aspect of urban form, the hills above the city of Tel's shape was gradually coming down to the plains. So later, became a form of urban planning undisturbed terrain. fourthly, urban structure has slowly changed from the temple based city to palace based city.

• Journal of Information Technology Services
• /
• v.20 no.5
• /
• pp.119-136
• /
• 2021

Since the global spread of COVID-19, social distancing and untact service implementation have spread rapidly. With the transition to a non-face-to-face environment such as telework and remote classes, cyber security threats have increased, and a lot of cyber compromises have also occurred. In this study, cyber-attacks and response cases related to COVID-19 are summarized in four aspects: cyber fraud, cyber-attacks on companies related to COVID-19 and healthcare sector, cyber-attacks on untact services such as telework, and preparation of untact services security for post-covid 19. After the outbreak of the COVID-19 pandemic, related events such as vaccination information and payment of national disaster aid continued to be used as bait for smishing and phishing. In the aspect of cyber-attacks on companies related to COVID-19 and healthcare sector, we can see that the damage was rapidly increasing as state-supported hackers attack those companies to obtain research results related to the COVID-19, and hackers chose medical institutions as targets with an efficient ransomware attack approach by changing 'spray and pray' strategy to 'big-game hunting'. Companies using untact services such as telework are experiencing cyber breaches due to insufficient security settings, non-installation of security patches, and vulnerabilities in systems constituting untact services such as VPN. In response to these cyber incidents, as a case of cyber fraud countermeasures, security notices to preventing cyber fraud damage to the public was announced, and security guidelines and ransomware countermeasures were provided to organizations related to COVID-19 and medical institutions. In addition, for companies that use and provide untact services, security vulnerability finding and system development environment security inspection service were provided by Government funding programs. We also looked at the differences in the role of the government and the target of security notices between domestic and overseas response cases. Lastly, considering the development of untact services by industry in preparation for post-COVID-19, supply chain security, cloud security, development security, and IoT security were suggested as common security reinforcement measures.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.

• Convergence Security Journal
• /
• v.19 no.2
• /
• pp.129-136
• /
• 2019

The main tasks of commander and staffs in ground operations are a continuation performing the process of making decisions in various situations. Since the current decision-making process is largely dependent on qualitative methods, it is difficult to integrate with the decision-making tools associated with the 4th Industrial Revolution. The purpose of this study is to suggest the process of deriving the relative importance of the evaluation factors using the AHP with focusing on assessing the avenues of approach in IPB related to the ground operation plan. The most important aspect of IPB is the evaluation of the avenues of approach. Evaluation factors include target accessibility, observation and seasons, concealment and cover-up, ease of maneuverability, and ease of transition to adjacent access roads. The existing methods are the comparison method with evaluation factors and the analysis with the advantages and disadvantages. However, it has been criticized that they regard evaluation factors as equal importance. The results show that target accessibility has the highest score related with priority when considering the criteria.