• 한국주조공학회지
• /
• 제20권3호
• /
• pp.197-207
• /
• 2000

Al-Si alloys were solidified in a rotating cylindrical mold by a vertical centrifugal casting process. Under a certain casting condition, there are four distinct zones such as the chill zone, the primary fine columnar zone, the equiaxed zone, and the secondary coarse columnar zone from the mold wall. The columnar-equiaxed transition (CET) and the equiaxed-columnar transition (ECT) were measured as functions of solute content, flow rate (mold velocity), pouring temperature and mold temperature. Within the critical value of solute content, as the flow rate increases, the columnar-equiaxed transition were found, but not the equiaxed-columnar transition. The aspect ratio of the primary columnar zone was more affected by the solute content than the flow rate. However the aspect ratio of the equiaxed zone was more affected by the flow rate than the solute content. The aspect ratio of the secondary columnar zone was affected by both the flow rate and the solute content.

• 한국대기환경학회지
• /
• 제21권5호
• /
• pp.525-535
• /
• 2005

Using a three-dimensional computational fluid dynamics (CFD) model with the $k-{\varepsilon}$ turbulence closure scheme based on the renormalization group theory, flow regimes in urban street canyons are classified according to the building and street aspect ratios. The transition between skimming flow (SF) and wake interference flow (WIF) is determined with the size of double-eddy circulation generated behind the upwind building. The transition between WIF and isolated roughness flow (IRF) is determined with the flow reattachment distance from the upwind building. The critical aspect ratios at which the flow transition occurs are found and compared with those in previous studies. The results show that the flow-regime classification method used in this study is quite reasonable and that the values of the critical aspect ratios are generally consistent with those in fluid experiments or large-eddy simulation. The regression equation describing a relation between the building and street aspect ratios at the flow-regime transition is presented.

• 한국세라믹학회지
• /
• 제35권6호
• /
• pp.603-609
• /
• 1998

The composites of insulating polymer filled with conducting carbon-fiber were fabricated by molding press method. To understand the fiber aspect-ratio dependence of electrical conductivity the aspect ratio was varied from 4 to 10 The percolation thresholds of transition from the insulator to the conductor de-creased as the fiber aspect ratio increased. The percolation threshold of fiber-segregated composite in this study was smaller than that of fiber-random composite shown in other study. When the electrical con-ductivity curves were fitted by general effective medium equation morphological variable(t) decreased as the fiber aspect-ratio increased.

• 기술혁신연구
• /
• 제22권3호
• /
• pp.193-223
• /
• 2014

최근 환경문제에 대한 구조적인 해결책을 찾는 과정에서 사회-기술 시스템이 하나의 핵심적인 분석단위가 되고 있다. 또한 지속가능성이라는 복잡한 도전과제에 대응하기 위해 전환이론에 관한 연구도 활발히 이루어지고 있다. 본 논문은 이와 같은 지속가능한 사회-기술 전환을 거버닝하기 위해 어떻게 접근할 수 있는지의 문제를 정부의 관점에서 다루고 있다. 보다 구체적으로, 전환이론과 거버넌스 이론을 접목하여 사회-기술 전환을 위한 정책 거버넌스를 유형화함으로써, 전환목표 달성을 위한 정부의 역할모델과 전환정책 설계를 위한 실천적 프레임워크를 제시하는 것을 목적으로 한다. 이를 위해 사회적 조정수준과 전환압력이 발생하는 위치를 전환정책 거버넌스를 유형화화기 위한 핵심 맥락으로 설정하고, 주도적 정책 거버넌스, 촉진적 정책 거버넌스, 조정적 정책 거버넌스, 설득적 정책 거버넌스 등 4가지 거버넌스 유형을 도출하여 각각의 특징과 사례를 논의하였다. 이와 같은 접근은 분석적 측면에서 각 유형별로 전환을 촉진하는 정책기능의 차이를 비교할 수 있는 가이드라인을 제공하는 한편, 규범적 측면에서는 정책입안자가 어떻게 효과적인 전환정책을 설계할 수 있을 것인지에 대한 판단기준을 제공하는데 기여할 수 있다. 또한 이론적 측면에서는 혁신정책 관점의 전환이론을 기존의 거버넌스 이론과 접목함으로써, 양 연구의 간극을 줄이고 전환에 대한 거버넌스적 고찰을 구체적인 전환이론과 연계하는데 기여할 수 있다.

• 오토저널
• /
• 제15권3호
• /
• pp.81-88
• /
• 1993

This report describes the experimental research on the flow phenomena of the aq uaous polymer solution within the Cuette flow of the concentric, cylinders type with a wide circular gap. We have investigated the phenomena of the fluid flow through torque measuring in the system that the inner cylinder is stationary and the outer one is rotating. Geometrical parameters of the system are the gap ratio of t/R$_{0}$=0.2 and Aspect ratio of l/t=100. The torque increases considerably in about 420-480RPM, So, it is considered a turbulent transition boundary, the higher plymer concentration is, the lower torque value is and the higher transition Reynolds number is. In each of the polymer concentration, the unstable boundary of torque, that is, idiosyncrasies of torque is observed around 220-280RPM. and the boundary is looked upon as a resonant vibration which is caused by the inner cylinder and tortional vibration of torque sensor.r.

• 한국영어학회지:영어학
• /
• 제2권4호
• /
• pp.519-536
• /
• 2002

This paper is to provide an analysis of the aspectual nature of naked infinitives(NIs) of English perceptual reports. Higginbotham(1983) proposes that only ‘active’ or ‘transient’ verbs can be used as NIs of English perceptual reports, but ‘state’ verbs cannot. This is called “confinement to the active or transient”. But there will be one problem when NIs of English perceptual reports are negatives. This is why the meaning of negative NIs of English perceptual reports may be static, which isn't in line with “confinement to the active or transient”. There are similar problems with ‘state’ NIs of English perceptual reports. In this paper some of these problems can be solved with the “Event Structure” of Pustejovsky(1991). According to Pustejovsky(1991), ‘process’ and ‘transition’ verbs have sub-eventual individuation units, but state verbs have no such units. It is the units that make it possible for ‘process’ and ‘transition’ to be perceived. As a result ‘process’ and ‘transition’ verbs are suitable for NIs of English perceptual reports. Nevertheless, there are still some problems unsolved. Moreover some state verbs are grammatically used as NIs of English perceptual reports. This paper proposes that these state verbs have “potentiality of transition”, and the potentiality comes from only the combination of the two parts of the complement - the subject and the naked infinitive. And the potentiality causes the “Event Structure” of Pustejovsky(1991) to be modified. And this modification makes it possible for us to explain aspect of NIs of English Perceptual Reports. It is concluded with some implication for Korean learners of English as a Foreign Language.

• 전기의세계
• /
• 제30권7호
• /
• pp.441-447
• /
• 1981

As a preceeding work for the study on dielectric characterstics of a kind of low density polyethylene introduced morphological change by mechanical method, glass transition temperature which is regarded as a macroscopic aspect for relaxation of molecular chain segments has been observed by means of temperature dependent dilatometric measurement. The origina specimen clearly shows two knees which correspond to two peaks (.gamma. and .betha. peak) in the intenal friction measurement, suggesting the existence of separated glass transition temperatures at 150.deg.k and 260.deg.k respectively. On the specimen irradiated to 100 Mrad both glass transition temperatures tend to shift towards high temperature sides because of crosslinking by irradiation. furthemore an evidence can be seen that radiation effect, even in amorphous phase, is also slelctive depending on slight morphological differences. The specimen extended to four times in length shows a peculiar nature such as negative linear thermal expansion coefficient increasing with temperature between 220.deg.k and ambient temperature and that this fact is interpreted by considering that c axis of the lattice aligns along the extended direction by drawing, further c axis inherently possesses the characteristics of negative linear thermal expansion coefficient. For the observations that the relatively small positive linear expansion on the specimen extended to ca. two times as well as the part below 220.deg.k of the specimen extended to four times, it is considered for the reason of the facts that the incompletely oriented region indicated as the middle part of Peterlin's model tends to restore partially to orginal arrangement-a kind of phase transition-as increasing with temperature.

• 한국가시화정보학회지
• /
• 제5권1호
• /
• pp.3-8
• /
• 2007

We present simple methods for fabricating high aspect-ratio polymer nanostructures on a solid substrate by rigiflex lithography with tailored capillarity and adhesive force. In the first method, a thin, thermoplastic polymer film was prepared by spin coating on a substrate and the temperature was raised above the polymer's glass transition temperature ($T_g$) while in conformal contact with a poly(urethane acrylate) (PUA) mold having nano-cavities. Consequently, capillarity forces the polymer film to rise into the void space of the mold, resulting in nanostructures with an aspect ratio of ${\sim}4$. In the second method, very high aspect-ratio (>20) nanohairs were fabricated by elongating the pre-formed nanostructures upon removal of the mold with the aid of tailored capillarity and adhesive force at the mold/polymer interface. Finally, these two methods were further used to fabricate micro/nano hierarchical structures by sequential application of the molding process for mimicking nature's functional surfaces such as a lotus leaf and gecko foot hairs.

• 한국조경학회지
• /
• 제27권3호
• /
• pp.50-57
• /
• 1999

This study aim to clarify the way of spatial composition of Tongdo Temple by diachronic analysis. The way of spatial composition was clarified through the analysis of built in architectural system in three periods. The result are as follows; 1. Spatial composition of Tongdo temple was changed in three period that it were establishment period, 1300s, and 1700s by the transition of meaning structure occurring the transition of spatial composition. 2. It was found out that the wat of spatial composition was three through the diachronic analysis the transition of spatial composition in Tongdo temple. 3. Juxtaposition as a way of spatial composition found out through the diachronic analysis is equivalent articulation of three sections; an upper, a middle, and a lower section and polyaxis or polycore in the each sections. Fusion is heterogenetic minglement mingling different kind of buildings and conjugation conjugating different kind of decorations. And accumulation of layer is mutilayer laying different time of layer and multi aspect aligning different kind of aspects since the temple's establishment.

• Wind and Structures
• /
• 제27권2호
• /
• pp.111-121
• /
• 2018

Experiments were conducted in a large-scale Ward-type tornado simulator to study tornado-like vortices. Both flow velocities and the pressures at the surface beneath the vortices were measured. An interpretation of these measurements enabled an assessment of the mean flow field as well as the mean and fluctuating characteristics of the surface pressure deficit, which is a manifestation of the flow fluctuation aloft. An emphasis was placed on the effect of the aspect ratio of the tornado simulator on the characteristics of the simulated flow and the corresponding surface pressure deficit, especially the evolution of these characteristics due to the transition of the flow from a single-celled vortex to a two-celled vortex with increasing swirl ratio.