• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.5
• /
• pp.691-700
• /
• 2019

Objective: This study was conducted to assess increasing doses of phytase added to broiler diets formulated with different levels of available phosphorus (avP), calcium (Ca), and sodium (Na), and the respective effects on performance parameters, quantitative carcass characteristics, ash and phosphorus deposition in tibia and weight of organs. Methods: Three different matrices were assumed for phytase with the following nutritional values: matrix A (MT A): 0.165% Ca, 0.150% avP, and 0.035% Na; matrix B (MT B): 0.215% Ca, 0.195% avP, and 0.045% Na; matrix C (MT C): 0.245% Ca, 0.225% avP, and 0.053% Na. There were six different diets: No phytase (formulated to meet the nutritional requirements); phytase 500 FTU/kg+MT A; phytase 1,000 FTU/kg+MT A; phytase 1,500 FTU/kg+MT A; phytase 1,000 FTU/kg+MT B and phytase 1,500 FTU/kg+MT C. Results: There was no significant phytase influence on performance, quantitative carcass characteristics, ash and phosphorus deposition in tibia and weight of the organ throughout the study period, however, it was possible to observe a tendency of improvement in body weight corrected feed conversion for broilers fed the phytase 1,500+MT C diet, where potentially these birds were more efficient on utilize phytic phosphorus and other nutrients bounded to phytate molecule, translating into improvement in performance, and there was also a non significant numerical improvement in body weight corrected feed conversion of broilers fed this diet. Conclusion: Broilers fed with diets formulated with different levels of avP, Ca, and Na and increasing doses of phytase have shown no change on performance, quantitative carcass characteristics, ash and phosphorus deposition in tibia and weight of organs.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.276-281
• /
• 2006

Although fireside corrosion of heat transfer surfaces in coal fired steam generators has been a problem to some extent for a number of tears, with the advent of low NOx firing systems these surfaces can be exposed to conditions that will exacerbate wastage rates. Numerous reports of waterwall wastage in coal fired boilers have appeared in the literature. It is believed that wastage results both from gaseous phase attack of metal surfaces and from deposition of ash and unburned fuel. Gaseous phase attack is known to occur in the presence of reducing sulfur species such as $H_2S$ and in the presence of fuel chlorine. The highest wastage rates are thought to be due to deposition of unoxidized material and the presence of fuel chlorine. Localized wall and near wall conditions that may exacerbate wastage include reducing conditions, high temperatures, high heat fluxes, and a high fraction of unoxidized material deposited. So, this study is directed at developing an advanced corrosion model in coal-fired utility boilers.

• Analytical Science and Technology
• /
• v.19 no.1
• /
• pp.18-30
• /
• 2006

This paper describes the cumulative deposition of fallout Pu in soil and lichen at the present time and give the characteristics of fallout Pu deposits in the soil. In the soil of the forest, the accumulated depositions of $^{239,240}Pu$ were estimated to be in the range of 34.0 to $101.2Bq\;m^{-2}$ with an average value of $65.3{\pm}21.6Bq\;m^{-2}$. The average inventory of $^{239,240}Pu$ in the forest was calculated to be two times higher than that in the hill. Also, the deposited activities of $^{239,240}Pu$ in cultivated soil were significantly lower than those in the hill or forest. However, the cumulative depositions of fallout Pu in the volcanic ash soil on Cheju Island were much higher than those in the forest and hill soils. The measured activity concentrations of Pu isotopes in lichens and mosses showed large variations, due to characteristics of species and life span of lichen and moss colonies. From depth profiles, it was found that most of the fallout Pu has been accumulated in upper 10 cm layer of soil. Except for a few cases, the concentrations of $^{239,240}Pu$ in soil tended to decrease exponentially with increasing soil depth. Among parameters affecting the cumulative deposition of fallout Pu, organic substances and rainfall play an important role in the retention and relative mobility of fallout Pu in the soil. However, pH showed a weak correlation with the deposition of fallout Pu in the soil. From sequential leaching experiments, Pu was found to be associated predominantly with the "organic" and "oxy-hydroxy" fractions. Both the activity ratios of $^{238}Pu/^{239,240}Pu$ and $^{241}Pu/^{239,240}Pu$ in soils, lichens and mosses and the atomic ratios of $^{240}Pu/^{239}Pu$ in soils are close to those observed in the cumulative deposit global fallout from nuclear weapon testings. The results obtained from this research make it possible to interpret and predict the behavior of fallout Pu under natural conditions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.6
• /
• pp.1001-1006
• /
• 2016

As consumption of energy is increasing rapidly, energy saving is emphasized in nowadays. Thermal power plant occupies a large proportion in various type of power plant. Major causes of decreased power generation efficiency on thermal power stations is deposition of fly ash. Soot Blower is a facility to remove the ash which is deposited outside of tube by steam blowing on boiler. Residual stream which caused by lance tube in soot blower cannot be discharged steam effectively in lance tube causes reducing the thickness of lance tube. On the contrary, increasing discharge ratio of steam, lance tube cannot sustain proper pressure to remove ash on tube. This study suggests increasing discharge ratio of steam with proper pressure to remove ash on tube by optimization on shape of lance tube nozzle. To optimize shape of nozzle, discharge ratio and maximum blowing pressure on nozzle is selected as object functions. Diameter of nozzle, distance between nozzles, angle of nozzle and gap between nozzle is selected as design parameters. Then the design of experiment (DOE) with an orthogonal array is performed to analyze the effect of design parameters. And grey relational analysis and analysis of mean (ANOM) is performed to optimize shape of lance tube.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.895-904
• /
• 2001

Flow fields, temperature distributions, and particle trajectories in a 2-stage entrained-flow gasifier are calculated using a CFD code, FLUENT. Realizable k-$\xi$ model is used as a turbulent model. Because of swirling flow there appear recirculation regions near the burners. The characteristics of flow fields and temperature distributions in the gasifier are dependent on the swirl number of the system. Mean residence time of the particles in the reductor is inversely proportional to particle size, particle density and swirl number. As the swirl number is increasing, the particles injected from the combustor burners approach the wall near the combustor burners, which prevents the particles from entering the reductor and thus attatching the reductor wall. If the lower combustor burner angle is larger than the higher combustor burner angle for a given swirl number, the particles may move toward the reductor and cause ash/slag deposition problem.

• 한국연소학회:학술대회논문집
• /
• 2015.12a
• /
• pp.197-200
• /
• 2015

Understanding the slag flow behavior is important in an entrained coal gasifier for its influence of ash discharge and wall heat transfer rate. This study presents a new model to predict the transient behavior of the liquid and solid slag layers. Unlike the previous steady-state model, the solid slag layer was included in solving the governing equations in order to identify the temporal and spatial transformation between the solid-liquid slag, rather than treating the solid region as a boundary condition of the liquid layer. The performance of the new model was evaluated for changes in the slag deposition rate (${\pm}10%$) and gas temperature (${\pm}50K$) in a simple cylindrical gasifier. The results show that the characteristic times to reach a new steady-state ranged between 80 s to 180s for the changes in the two parameters. Because the characteristic times of the gasifier temperature and slag deposition rate by changes in the coal type and/or operating conditions would be almost instantaneous, the time-scale for the slag thickness at the bottom of the gasifier to stabilize was much larger.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.7
• /
• pp.979-985
• /
• 2001

Two experiments on commercial broiler chickens (3-37 d) and WL layers (252-364 d) were conducted to study the relative bioavailability of phosphorus (P) from different P supplements in comparison to tricalcium phosphate (TCP), at constant dietary calcium (Ca):P ratio. The P sources tested were dicalcium phosphate (DCP), steam sterilized bone meal (SSBM), commercial mineral mixture (CMM), phosphoric acid (PA) and a combination of CMM + PA. Fluorine (F) content in CMM and SSBM was 13.12 and 0.14 g/kg, respectively. In commercial broiler diets, DCP, SSBM or PA could be used as supplemental P sources without affecting (p<0.05) weight gain, feed intake, tibia ash and, P and Ca contents in tibia ash when compared to TCP. Severity of leg abnormality and deposition of F in bone were higher (p<0.05) in group fed CMM. P retention and serum inorganic P content was significantly reduced (p<0.05) in CMM fed birds compared to those fed TCP, SSBM, PA or CMM+PA. Among other P sources (TCP, SSBM, PA and CMM+PA) the serum inorganic P levels did not vary significantly (p<0.05). The P retention also significantly reduced in CMM fed groups compared to those fed DCP or PA. The P retention significantly increased from 0.183 to 0.216 units by supplementation of PA to CMM diet. In layers, egg production was not affected by replacing TCP with DCP, SSBM, PA or CMM+PA, but significantly (p<0.05) reduced with CMM. Feed (kg)/kg egg mass, egg weight, shell quality (shell weight and shell thickness) and serum Ca levels were not influenced by dietary variation in P source. The poor performance of both broilers and layers fed on CMM based diets could be attributed to the presence of hlgher levels of F (647.8 and 630.1 mg/kg, respectively) and low P utilization. Based on growth, bone mineralization and P retention it is concluded that DCP, SSBM or PA can be used as alternatives to TCP in broiler diets. In WL layer diets, in addition to above P sources, CMM can also be used as supplemental P source by replacing one half of P from CMM with PA without affecting egg production and shell quality.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.3
• /
• pp.160-166
• /
• 2007

The coarse deposit with a lower mud content adjacent to the shelf of the southern East Sea is probably a "relict" sediment deposited in response to a lower stand of sea level during the Pleistocene. The sediment that developed on the slope and in the deep sea was river-borne primarily and was secondarily reworked or redistributed by the Tsushima Warm Current from the East China Sea. The clay mineralogy of the area suggests various sources of fine-grained sediment from adjacent rivers, the Korea Strait, volcanic material from Ulleung Island, and the Japan coast. Massive sand, bioturbated mud, homogeneous mud, and laminated mud were the dominant facies found in the core sediments from the study area. The massive sand was mainly volcanic ash from an eruption on Ulleung Island (9300 yr BP) and consisted of colorless pumiceous glass and a black scoriaceous type. The sedimentation rates on the slope, based on the Ulleung-Oki ash layer, were about 10cm/ky higher than in the basin. Other than the coarse-grain sediment, the mean size of the fine sediment dominating the bioturbated and homogeneous muds in the basin and the laminated mud on the slope was 6-10 phi. This indicates a difference in the major sedimentary process: hemipelagic sedimentation in the Ulleung Basin and mass flow deposition, such as turbidite, on the slope of the southern East Sea.

• Nutrition Research and Practice
• /
• v.13 no.6
• /
• pp.529-534
• /
• 2019

BACKGROUND/OBJECTIVES: The leaves of Moringa oleifera (MO) and Moringa stenopetala (MS) commonly grown in Ethiopia possess potential nutritional and medicinal value. The aim of this study was to evaluate the nutritional and functional characteristics of the dried leaf powder from two Moringa species to develop sustainable nutritional supplements for Ethiopians from locally grown plant sources. MATERIALS/METHODS: Freshly harvested and air-dried MO and MS leaves were authenticated and the nutritional contents, such as protein, ash, lipids, and selected vitamins and minerals, were analyzed using standard analytical procedures. Amino acid compositions were also determined by an amino acid analyzer. Nine-week-old mice were randomly divided into four groups to investigate the anti-obesity effects of Moringa. The first group was fed a basal diet, the second group a high-fat diet, and the others were fed a high-fat diet containing 0.1% Moringa leaf powder from each species. After seven weeks, serum indices related to lipid profiles from each mouse were analyzed. RESULTS: The present study revealed high protein (28-29%) and ash (7-11%) contents. Glutamic acid, aspartic acid, proline, and leucine were the most abundantly found amino acids in both species. The predominant minerals in the leaf powder were calcium (826-1,530 mg/100 g), potassium (794-904 mg/100 g), and magnesium (286-431 mg/100 g). Pyridoxine (475.06 mg/100 g) and vitamin E (34.2 mg/100 g) were found only in MS. Niacin was found only in MO at 32.21 mg/100 g, whereas ascorbic acid was found in both species (3.89 and 6.19 mg/100 g dry weight for MO and MS, respectively). The results of the animal study showed that mice on a high-fat diet containing 0.1% MO leaf powder alleviated the elevation of cholesterol, triglycerides, and low-density lipoprotein cholesterol induced by the high fat diet. MO was more effective than MS in preventing hypercholesterolemia and fat deposition. CONCLUSION: The findings in this work confirmed that Moringa leaves of both MO and MS possessed high nutritional value but MO was better at preventing the harmful effects of the high-fat diet than MS.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2802-2811
• /
• 2023

In a first-of-its-kind study, terrestrial radionuclide concentrations were measured in 35 topsoil samples from the outskirts of Dhaka using HPGe gamma-ray spectrometry to assess the radiological consequences of such a vast number of brick kilns on the plant workers, general as well as dwelling environment. The range of activity concentrations of ²²⁶Ra, ²³²Th, and ⁴⁰K is found at 19 ± 3.04 to 38 ± 4.94, 39 ± 5.85 to 57 ± 7.41, and (430 ± 51.60 to 570 ± 68.40) Bq/kg, respectively. ²³²Th and ⁴⁰K concentrations were higher than the global averages. Bottom ash deposition in lowlands, fly ash buildup in soils, and the fallout of micro-particles are all probable causes of the elevated radioactivity levels. ¹³⁷Cs was found in the sample, which indicates the migration of ¹³⁷Cs from nuclear accidents or nuclear fallout, or the contamination of feed coal. Although the effective dose received by the general public was below the recommended dose limit but, most estimates of hazard parameters surpass their respective population weighted global averages, indicating that brick kiln workers and nearby residents are not safe due to prolonged exposures to terrestrial radiation. In addition, the soil around sampling sites is found to be unsuitable for agricultural purposes.