• 제목/요약/키워드: Ash Component

검색결과 364건 처리시간 0.028초

잿물 동시매염에 의한 소목의 염색에서 잿물의 pH 변화와 키토산 첨가가 염색성에 미치는 영향 (Effects of the pH Change of Ash Solution and the Addition of Chitosan on the Caesalpinia sappan Dyeing in the Simultaneous Mordanting with the Addition of Ash Solution)

  • 서희성;전동원;김종준
    • 복식문화연구
    • /
    • 제13권5호
    • /
    • pp.686-698
    • /
    • 2005
  • In this study, simultaneous mordanting method of dyeing in the Caesalpinia sappan dye liquor mixed with the rice straw ash solution was employed. The dyeing effects were compared and reviewed according to the changes of dyeing mechanisms of pre-mordanting and simultaneous mordanting using ash solutions. By the direct addition of the ash solution, the pH of the liquor was abruptly changed. In the case of maintaining the pH value of the ash solution at about 7 or 8, compared to the pre-mordanting, $a^{*}$ values increased and $b^{*}$ values decreased. As a result, it is highly desirable in terms of selective emphasis on the reddish hue. The color development, differentiated from that obtainable by the dyeing of chitosan pre-treated fabric, was obtained due to the effect of the water soluble chitosan component on the dyeing mechanism.

  • PDF

Ash 세정제에 따른 CDPF의 물리화학적 특성 (Physicochemical Characteristics of CDPF according to Ash a Cleaning agent)

  • 서충길
    • 한국산학기술학회논문지
    • /
    • 제18권4호
    • /
    • pp.641-647
    • /
    • 2017
  • 디젤 엔진은 가솔린기관에 비해 강력한 파워와 연료의 경제성 및 $CO_2$ 배출양이 적어 상용차뿐만 아니라 일반승용차에서도 시장의 수요가 지속적으로 증가하고 있다. 디젤 엔진의 연소특성상 국부적인 고온반응 영역에서 질소산화물과 확산연소 영역에서 입자상물질이 많이 배출되므로 엄격해진 배기규제를 충족시키기 위해서 자동차와 선박등 촉매후처리장치 장착의 비중이 점차 증가하고 있다. 그 중 입자상물질 저감장치로써 입자상물질필터가 장착되어 왔으나 PM중 약 50%가 연료와 엔진오일에서 석출된 재 성분이 침적되면 필터를 손상시키므로 고온의 연소방식이 아닌 세정제를 이용한 제거기술이 절실히 필요하다. 이 연구의 목적은 디젤 엔진용 촉매코팅된 디젤입자상물질필터에 침적된 재를 세정을 함에 있어서 촉매의 물질의 물리화학적인 특성을 연구하는 것이다. 30분 동안 세정제에 담근 S4 샘플은 침투력이 강한 성분으로 인하여 입자들끼리 응집되고 수축되었다. 재에 침투력이 강한 침투제와 물과 기름을 혼합시켜주는 계면활성제 성분이 적절하게 제조된 S1 샘플의 세정특성이 가장 좋았다. 침투제인 수산화칼륨과 규산나트륨 성분이 첨가된 S4 샘플의 와쉬코트 손실률은 약 13%로 증가하였다. 촉매코팅된 디젤입자상물질필터의 와쉬코트 손실률이 약 13% 이하조건에서 유해가스 성분을 저감시킬 수 있었다.

폴리실리콘 슬러지와 제지애시를 활용한 무시멘트 경화체의 알칼리자극제 종류 및 혼입율에 따른 강도특성 (Strength properties according to mixing type and ratio Alkali activator of Non-cement matrix using Paper Ash and Polysilicon sludge)

  • 신진현;김태현;김헌태;이동훈;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2017년도 춘계 학술논문 발표대회
    • /
    • pp.173-174
    • /
    • 2017
  • Recently, many experiments using industrial by-products have been going on in Korea and abroad. Most of the studies on blast furnace slag and fly ash have been conducted, and the blast furnace slag based two and three component experiments have been conducted in many places. Therefore, this study is an additional study of research using polysilicon sludge and paper ash, which is a study using existing industrial by-products based on blast furnace slag, as strength properties of alkali activator according to kind and mixing ratio and to obtain basic data do.

  • PDF

내백 수삼 전분의 특성 (The Physicochemical Properties of Starch from Inside White Fresh Ginseng)

  • 박훈;이미자;조병구;이정렬
    • Journal of Ginseng Research
    • /
    • 제18권3호
    • /
    • pp.191-195
    • /
    • 1994
  • Among many kinds of constituents of ginseng root, starch was the most noticeable component related to inside white in fresh ginseng. The ash of inside white section was higher in content and greenish gray in color. The water binding capacity and ash content of the starch from inside white fresh ginseng were higher than those of starch from normal fresh ginseng, but amylase content was not significantly different. Ash of inside white fresh ginseng starch contained higher in Ca, Mn and Fe content. Complexes of small granular starch and amino acids were rich in swelling power, and solubility by temperature change were similar between inside white fresh ginseng starch and normal one, but the former was more easily swelled than the latter.

  • PDF

고유동 자기충전 콘크리트의 압축 강도수준별 배합특성 (Properties of Mixing Proportions with Compressive Strength Level of High Flowing Self-Compacting Concrete)

  • 최연왕;정재권;정우용
    • 대한토목학회논문집
    • /
    • 제29권2A호
    • /
    • pp.163-169
    • /
    • 2009
  • 본 연구에서는 3수준의 강도 변화에 따른 고유동 자기충전 콘크리트를 제조하여 콘크리트의 유변학적 특성 및 역학적 특성 평가하기 위하여 석회석 미분말, 플라이애시 및 고로슬래그를 2성분계 및 3성분계 배합으로 제조된 콘크리트의 유동 및 강도 실험을 실시하였다. 실험 결과 30 MPa급의 고유동 자기충전 콘크리트는 품질확보, 강도 및 점성 조절용으로 석회석 미분말 20% 및 플라이애시 30% 배합이 요구성능을 만족하였으며, 50 MPa급의 고유동 자기충전 콘크리트는 고로슬래그 미분말 10% 및 플라이애시 20%를 사용한 배합이 소요의 유동 및 강도 특성을 만족하였다. 또한 분체량이 많은 70 MPa급의 경우 유동성 향상 및 점성 감소용으로 고로슬래그 20% 및 플라이애시 10% 배합이 요구성능을 만족하였으며, 모든 배합에서 플라이애시의 사용이 점성확보 및 시멘트 절감효과를 위하여 사용 될 수 있을 것으로 판단된다. 이상의 실험 결과를 통하여 압축 강도수준별 고유동 자기충전 콘크리트는 2성분계 배합의 경우 보다 플라이애시를 포합한 3성분계 배합이 적합한 것으로 판단된다.

비산재 성분과 원소 및 산화수은의 반응특성 (Reaction Characteristics of Elemental and Oxidized Mercury with Fly Ash Components)

  • 이상섭;김광렬;오광중;전준민;강동창
    • 청정기술
    • /
    • 제19권4호
    • /
    • pp.453-458
    • /
    • 2013
  • 배기가스 중에서 비산재는 수은을 산화하거나 흡착하는 능력을 지닌다. 비산재의 수은 산화 및 흡착 효율은 비산재가 가지는 특성에 따라 변하여 일정하지 않다. 본 연구는 비산재 성분과 수은의 반응특성을 이해하기 위하여 비산재 성분물질이 원소수은과 산화수은에 대해 가지는 산화 및 흡착 능력을 평가하였다. 그리고 비산재 시료의 조성에 맞게 합성한 비산재를 시험하였고, 석탄화력발전소에서 수령한 비산재 시료의 결과와 비교하였다. 원소수은에 대해서는 미세탄소분말, 산화구리, 산화철이 높은 산화 또는 흡착효율을 보였고, 염화수은에 대해서는 미세탄소분말, 산화칼슘, 산화구리, 산화마그네슘이 높은 효율을 보였다. 그리고 합성비산재는 비산재 시료와 유사한 수은 산화 및 흡착 효율을 보였다.

제사용수 중 철성분이 생사 색택에 미치는 영향 (Effect of Iron Component in Filature Water on the Coloring of Raw Silk)

  • 김병호
    • 한국잠사곤충학회지
    • /
    • 제6권
    • /
    • pp.34-38
    • /
    • 1966
  • 본 실험은 제사용수, 견층, 생사중의 철분을 분석하여 정량하고, 제사용수중의 철분 함유량에 의한 생사내의 철분 함유량 변화 및 생사에의 착색정도에 대해서 조사하였다. (1)우리나라 제사용수는 대개 0.01~0.77PPM 범위내의 철분을 함유하고 있으며 평균 0.23PPM이 함유되어 있다. (2) 원수가 정수인 경우는 하천수인 경우에 비하여 2배 정도의 더 많은 철분을 함유하고 있다. (3) 견사(원료견)중의 철분 함유량(Fe$_2$O$_3$ 0.0096%)과 생사중의 철분 함유량(Fe$_2$O$_3$ 0.0084%)은 거의 비슷하나 회분량에 있어서는 견사가 생사의 약 2배, 그리고 회분중의 함유량은 생사가 견사에 비해 2배 정도 많았다. (4) 용수중의 철분 함유량은 자견, 조사시 철분의 용해 및 흡착에 크게 영향을 준다. 즉 철분 함유량이 적은 용수로 자견, 조사를 할 때는 견사로부터의 철분 용해량이 증가하지만 철분 함유량 0.4PPM 이상의 용수를 사용한 경우는 용수로부터의 흡착량이 더 많아져서 생사는 견사(원료견)가 가지고 있는 철분 함량보다도 더 많은 철분을 함유하게 된다. (5) 용수중의 철분은 생사를 미로 착색시키며 용수중의 철분 함유량이 증가하는데 따라 착색의 농도가 짙어진다. 철분은 소량이어도 착색력이 강하나 망강은 다량이 존재하여도 생사를 착색시키는 힘이 미약하다.

  • PDF

Physico-chemical Characteristics of Ammonia Adsorbed Fly Ash (AAFA)

  • Kim, Jae-kwan;Park, Seok-un;Hong, Jin-pyo
    • KEPCO Journal on Electric Power and Energy
    • /
    • 제4권1호
    • /
    • pp.39-45
    • /
    • 2018
  • Ammonia Adsorbed Fly Ash (AAFA) samples produced from coal fired plants equipped with SNCR (Selective Non-Catalytic Reduction) of nitrogen oxides with urea have been chemically analyzed, and their physical and dissolution properties have been investigated. XRD results for the ammonia component in AAFA ascertained that ABS (ammonium bisulfate) and AS (ammonium sulfate) were deposited on fly ash as $SO_3$ reacted with unreacted ammonia at SNCR. SEM and EDS images showed that fine ashes on large fly ash surface of sphere type were agglomerated, due to adhesive role of ammonium salts attached fly ashes. Dissolution test results of ammonium salts absorbed on AAFA in distilled water or sea water showed that the proportion of un-ionized $NH_3$ to $NH_4{^+}$ were primarily a function of pH and temperature. Increasing pH and temperature causes an increase in the fraction of un-ionized $NH_3$. At pHs of 9.6 and 10.7, un-ionized $NH_3$ and $NH_4{^+}$ ions are present in equal amounts at distilled water and sea water, respectively.

석탄회의 가열에 따른 광물조성 변화 (Mineral compositions of the heated coal fly ash)

  • 한경섭;송종택;윤성대;안민선
    • 한국결정성장학회지
    • /
    • 제5권2호
    • /
    • pp.175-180
    • /
    • 1995
  • 석탄회의 성상 해명의 일환으로서, 석회석의 열처리 조건과 광물조성의 관계를 검토했다. 석탄회의 주 광물조성은 mullite, quartz 및 유리상(약 20 ~ 25wt%)이었으며, $1000^{\circ}C $ 까지는 거의 변화가 없었다. 안산의 석탄회 중에는 calcite가 함유되었으며, $1200^{\circ}C $ 에서 calcite 분해로부터 온 CaO, quartz 및 유리상 중의$Al_2O_3$가 반응하여 anorthite($CaO{\cdot}Al_2O_3{\cdot}2SiO_2$)로 바뀌는 것을 알 수 있었다.

  • PDF

연탄 화력발전소 보일러에서 다탄종 연소가 슬래깅 발생에 미치는 영향 (The Effect of Multi-Coal Combustion on the Generation of Slagging in a Bituminous Coal-fired Power Plant Boiler)

  • 박지훈;유호선
    • 플랜트 저널
    • /
    • 제18권1호
    • /
    • pp.55-61
    • /
    • 2022
  • 본 연구에서는 역청탄으로 설계된 870MW급 유연탄 화력발전소를 대상으로 발전기 출력, 연소조건, 통풍조건을 일정하게 유지하면서 역청탄과 아역청탄을 혼합하여 연소함에 따른 슬래깅 발생 영향을 분석하였으며, 이에 따른 보일러 성능에 영향을 주지 않는 허용 가능한 혼탄 방안을 제시하였다. 아역청탄의 혼합 비율을 10%, 20%, 40%, 60%, 80% 등으로 조정하여 원소분석, 공업분석, 회융점 변화, 슬래깅 지수 등을 확인하였고, 적정 혼탄 조건은 아역청탄은 40% 이하로 혼탄하고, 회의 산성분 대비 염기성분 비율은 0.4이하 또는 1이상, 총 알칼리는 3.5이하, 융점 슬래깅 지수는 1,345℃ 이상, 원소분석 시 회함량은 13% 이하, 공업분석 시 회함량은 15% 이하, 초기용융점은 최소 1,200℃ 이상이어야 바람직하다고 판단된다.

  • PDF