• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.1-5
• /
• 2012

$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ hollow fiber with o.d. 1.02 mm and i.d. 0.437 mm were fabricated by a phase-inversion spinning technique.The starting $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ precursor was synthesized by the polymerized complex method and then calcined at $900^{\circ}C$. As-prepared powder was dispersed in a polymer solution, and extruded as form of hollow fiber through a spinneret. Finallydense $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ hollow fiber membrane was obtained by sintering for 2 h at $1,080^{\circ}C$ for the application of oxygen separation. In addition, despite a very thin membrane with 0.58 mm, the BSCF hollow fiber membrane possessed a proper mechanical strength of 602.5 MPa.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.13-22
• /
• 2015

$CO_2$ emitted from building materials and construction materials industry reaches about 67 million tons, which occupy about 30 % of $CO_2$ emitted from the construction field. Controls on the use of consumed fossil fuels and reduction of emission gases are essential for the reduction of $CO_2$ in the construction area as we reduce the second and third curing to emit $CO_2$ in the construction materials industry. Accordingly, this study applied the low energy curing admixture (hereinafter "LA") to the extruded panels to observe the physical properties, depending on the mixing amount of fiber, type of fiber and mixing ratio of fiber. The type of fiber did not appear to be a main factor to affect strength, while the LA mixing ratio and mixing amount of fiber appeared to be major factors to affect strength. Especially, the highest strength was developed when the LA mixing ratio was 40%, whereas the test object with the mixing ratio of 50% resulted in the decrease of strength. In addition, it appeared that the mixing ratio of fiber greatly affected flexural strength and strength increased as the mixing ratio increased.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.99-105
• /
• 2010

Proximate composition of whole hemp seed, paste viscosity of whole hemp seed pellets, bulk density, color, compression force, water solubility and absorption index and bowl life of whole hemp seed flakes manufactured by extrusion process were determined to evaluate whole hemp seed as flake additive. Extrusion process conditions were 35% of moisture content and 90, 100 and 110$^{\circ}C$ of barrel temperature. Content of moisture content, crude protein, crude fat, crude ash from whole hemp seed were 5.67${\pm}$0.02%, 25.93${\pm}$0.16%, 28.21${\pm}$0.56% and 7.70${\pm}$0.08%, respectively. The pellets hemp seed at 100 or 110$^{\circ}C$ had higher paste viscosity as compared to those pellet at 90$^{\circ}C$. The bulk density values of all hemp seed flakes were between 0.24 to 0.43 g/mL, depending on the barrel temperatures. The hardness of flake increased with decreasing percentage of hemp seed in flakes. An increase in barrel temperature from 90$^{\circ}C$ to 110$^{\circ}C$ resulted in increase of WSI and decrease of WAI. The bowl life of hemp seed flakes was increased from 5.8 to 15.5 min with the decrease in percentage of hemp seed. The highest overall quality was showed in flake added with 20% of hemp seed.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.71-79
• /
• 2022

Excessive crown height space increases can cause crestal bone loss and screw loosening after prosthesis is placed. Milled bar and implant overdenture can be used as a treatment method for partially edentulous patients who have severe alveolar bone loss and excessive crown height space. Milled bar can provide primary splinting effect and stability between implants. Also, milled bar with additional retention device such as Advanced Dental Device-Treatment Of Choice (ADD-TOC) and magnet can provide additional retention force for implant overdenture. In this case, the patient has a partially edentulous mandible that has severe alveolar bone loss and multiple number of teeth loss after excision due to leiomyosarcoma. Because of the long-term loss of mandibular molars, the opposing teeth were extruded. Maxillary left molars were corrected to the occlusal plane through molar intrusion, and mandibular left molar region were treated with implant overdenture, using milled bar with ADD-TOC and magnet after implant placement. The clinical result was satisfactory on the aspect of esthetic and masticatory function.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.223-231
• /
• 2001

The success of nuclear transplantation with mammalian oocytes depends critically on the potential of oocytes activation, which mainly caused to prevent the re-accumulation of maturation promoting factor (MPF). This study was conducted to compare the effect of combined treatment of lonomycin with a Hl-histone kinase inhibitor (dimethylaminopurine, DMAP) or cdc2 kinase inhibitor (sodium pyrophosphate, SPP) on activation of bovine oocytes. In vitro matured bovine oocytes with the first polar body (PB) and dense cytoplasm were assigned to 3 experimental groups. For activation treatment, oocytcs were exposed to 5 $\mu$M lonomycin for 5 min (Group 1), and followed by 1.9 mM dimethylaminopurine (DMAP) for 3 h (Group 2) or followed by 2 mM sodium pyrophosphate (SPP) for 3 h (Group 3). The activation effects in the three treatments and the control group (untreated) were judged by the extrusion of the second PB and formation of a pronucleus (PN). Differences among groups were analysed using one-way ANOVA after arc-sine transformation of proportional data. All three treatments led to high activation rates (90% to 95%), with significant difference from the control. However, the extrusion of the second PB and the rate of PN formation differed remarkably among treatments. In Group I and 3, about 95% of the oocytes had extruded the second polar body, but one PN had formed in a higher proportion of oocytes in Group 3 than in Group 1 (90% vs. 5%). In experiment 2, the rates of cleavage and development into blastocysts in Group 1 were significantly lower than those of Group 2 and 3 (8.7% and 0% vs. 50.5% and 11.6%, and 44.6% and 7.2%, respectively, P<0.05). In experiment 3, ~80% of parthenotes in Group 1 were developed with haploid chromosomal sets. However, when ionomycin was followed immediately by DMAP (Group 2). only 20% of parthenotes were haploid. In Group 3, combined treatment with ionomycin and SPP, the appearance of abnormal chromosomal tracts was significantly (P〈0.05) reduced and the proportion of haploid parthenotes was increased to 85% (17/20) than in Group 2. These results demonstrate that SPP acted as a cdc2 kinase inhibitor and formed the haploidy in oocyte activation. Thus, the present study suggests that cdc2 kinase inhibitor, such as sodium pyrophosphate, may have an effective role in oocyte activation for the production of cloned embryos/animals by nuclear transplantation.

• The korean journal of orthodontics
• /
• v.30 no.5 s.82
• /
• pp.643-655
• /
• 2000

In Patients with severe skeletal discrepancy, surgical orthodontic treatment must be accompanied, and recently two jaw surgery has become a common procedure, resulting in improved esthetics and function. Choosing the position of the occlusal plane in this two jaw surgery is an important factor in postoperative stability Therefore this must be taken into consideration during the diagnosis and treatment plan. In this study, among patients with skeletal Class III occlusion, 25 patients(8 male, 17 female, average age $23.2{\pm}3.17$) who have undergone two jaw surgery, setting the ideal occlusal plane according to Delaire's architectural and structural cranial analysis. In comparing preoperative($T_1$). postoperative($T_2$, average of 15.4 days), and long-term postoperative($T_3$, average of 32.6 months) lateral cephalometric radiography, the following conclusions have been made. 1. There were no significant changes of the occlusal plane angle after the two jaw surgery, and there were no significant differences between the surgical technique(SSRO and IVRO). 2. The postoperative changes of the occlusal Plane had no relationship with the amount of jaw movement, amount of posterior impaction, nor the time relapse after surgery. 3. After two jaw surgery, in the SSRO group there was significant forward movement of the mandible, and in the IVRO group the lower incisors extruded as the mandible moved backward and downward which makes the genial angle and the mandibular plane angle significantly increased

• Restorative Dentistry and Endodontics
• /
• v.29 no.5
• /
• pp.439-445
• /
• 2004

The purpose of this study was to evaluate the influence of plugger penetration depth on the apical extrusion of root canal sealer during root canal obturation with Continuous Wave of Condensation Technique. Root canals of forty extracted human teeth were divided into four groups and were prepared up to size 40 of 0.06 taper with ProFile. After drying. canals of three groups were filled with Continuous Wave of Condensation Technique with System $B^{TM}$ and different plugger penetration depths of 3. 5, and 7 mm from the apex. Canals of one group were filled with cold lateral compaction technique as a control. Canals were filled with non-standardized master gutta-percha cones and 0.02 mL of Sealapex. Apical extruded sealer was collected in a container and weighed. Data was analyzed with one-way ANOVA and Duncan's Multiple Range Test. 3 and 5 mm penetration depth groups in Continuous Wave of Condensation Technique showed significantly more extrusion of root canal sealer than 7 mm penetration depth group (p < 0.05). However, there was no significant difference between 7 mm depth group in Continuous Wave of Condensation Technique and cold lateral compaction group (p < 0.05). The result of this study demonstrates that deeper plugger penetration depth causes more extrusion of root canal sealer in root canal obturation by Continuous Wave of Condensation Technique. Therefore, special caution is needed when plugger penetration is deeper in the canal in Continuous Wave of Condensation Technique to minimize the amount of sealer extrusion beyond apex.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.614-618
• /
• 2018

The changes in the mechanical properties according to the width of the tool shoulder, rotation speed and moving speed in friction stir welding (FSW) are evaluated using Al 6061-T6. The results indicated that the tensile strength value increases with increasing rotation speed. The higher the moving speed of the tool shoulder, the lower the tensile strength, regardless of the tool type. A higher tensile strength value was generally obtained with a tool shoulder diameter of 12mm (TSD12) than with 8mm. When the moving and rotation speeds exceed a limiting value, a stabilization stage is reached, in which (the tool shoulder diameter?) no longer affects the material properties. At a tool shoulder diameter of 8mm (TSD8), the material properties are decreased and the mixture of material in the welding area is incomplete in comparison with the tool type of TSD12. The tensile strength value is decreased at a rotation speed of 1500 rpm. As a result, a rotation speed higher than the threshold value is needed in order for and the transition temperature to be reached, which allows the complete mixing of the material in the welding area.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.2
• /
• pp.123-129
• /
• 2011

Purpose : To compare lumbar disc changes between initial lumbar spine (L-spine) MRI and follow-up (f/u) MRI that were performed due to recurred backaches. Materials and Methods : A total 50 patients who had undergone f/u L-spine MRI were retrospectively reviewed. Five discs (L1-S1) were surveyed in each f/u MRI. Lumbar disc changes were defined as no change, aggravations, or improvements compared to initial disc states. These states were defined on the basis of morphologic status and disc levels. Results : In a total of 250 discs in 50 patients, 31 discs (12.4%) showed morphologic changes of disc lesions, whereas 219 discs (87.6 %) showed no changes. Among the 31 disc lesions, 24 were aggravated and 7 were partially improved. And on the basis of disc status, initially abnormal discs revealed any morphologic changes of the degree of disc herniation. A total of 33.3% of the morphologic changes are noted in initially extruded discs. Fifteen morphologic changes of disc lesions were located at the L4-5 level. Conclusion : Our results suggest that correlations between lumbar disc herniations and back pain symptoms are limited, and that evaluations of extra disc lesions are required.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.22-22
• /
• 2001

To produce reconstituted rabbit embryos with fetal fibroblasts, the present study was evaluated the efficiencies of the different fusion and activation conditions as assessments of subsequent development and chromosome in the embryos. New Zealand White rabbits were used throughout the study. Fetal fibroblasts collected from 22-d of fetuses were cultured in DMEM ＋ 10% FBS in 5% $CO_2$ in air. The culture was maintained for 10 passages. In every passage half of cell suspension were kept In frozen. From rabbits treated with FSH in 30% PVP solution and hCG, oocytes were surgically collected from oviducts at 14 h post-hCG injection and stripped off their cumulus cells by re-pipetting in a 300 IU hyaluronidase solution. Oocytes with an extruded first polar body and dense cytoplasm were enucleated by micromanipulation in Ham's F-10 medium＋7.5 g/$m\ell$ cytochalasin B. Euncleation was confirmed under a fluorescence microscope after staining with 5 g/$m\ell$ bisbenzimide for 2 min. Each enucleated oocyte was injected with a fetal fibroblast into a perivitelline space. Reconstructed eggs were compared fusion rates either at 2.0 ㎸/cm or 1.6 ㎸/cm(60 sec, double pulses). After fusion, all eggs were activated with the combination of 5 M ionomycin (5 min) and 10 g/$m\ell$ cycloheximide (CHX, 3h), and cultured in CRlaa medium and transferred into TCM199＋10% FBS on day 3. Although there was not significantly differ in fusion rate between treatments (60%, 2.0 ㎸/cm vs. 79.4%, 1.6 ㎸/cm), none of them in the eggs fused with 2.0 ㎸/cm developed to blastocyst. In comparison of development and chromosome status between different activation treatments (Group 1; 5 M ionomycin/10 g/$m\ell$ CHX, Group 2; 5 M ionomycin/5 g/$m\ell$ CHX ＋ 2 mM DMAP after fusion with 1.6 ㎸/cm), there were not differ in cleavage and development rates (67.3% and 28.9% in Group 1; 67% and 33% in Group 2). All out of 8 embryos evaluated in Group 1 appeared a normal diploid chromosome sets and mean number of cells (Mean SEM) on day 4.5 of culture was 141.5 23.15 (n=8). It can be concluded that the use of cycloheximide has not happened in chromosome abnormalities, and fetal fibroblasts can be used for cloning in rabbit.