• Transactions of Materials Processing
• /
• v.20 no.7
• /
• pp.498-503
• /
• 2011

The strain rate sensitivity index, m, plays an important role in plastic deformation at elevated temperatures. It is affected by strain rate, temperature, and the microstructure of the material. The strain rate sensitivity index has been used as a constant in numerical analysis of plastic forming at a specified strain rate and temperature. However, the value of m varies as deformation proceeds at an elevated temperature and a certain strain rate. Thus, in this present study, the value of m has been characterized as a function of strain by multiple tensile jump tests for AZ31 magnesium alloy sheet, and the variation of m has been discussed in conjunction with the microstructural observations before and after deformation. The experimental results show that the variation of m is dependent on the temperature and strain rate. Grain growth with dynamic recrystallization also affects the variation of m.

• Korean Journal of Microbiology
• /
• v.20 no.3
• /
• pp.125-133
• /
• 1982

Mutational experiments were performed to imporve the cellulase productivity of Aspergillus phoenicis KU175, isolated from the southern part of Korea, as a high cellulase producer. By treatment ultra-violet light nad 4-NQO(4-Nitroquinoline-N-Oxide), mutation waas induced, and treatment ultra-violet light and 4-NQO (4-Nitroquinoline-N-Oxide), mutation was induced, and A.phoenicis KU175-115 was finally selected for its highest avicelase production. Avicelase production of the mutant was increased about 2 times compared with those of the wild strain. However, activities of other hydrolytic enzymes, such as amylase, protease and nuclease, of the mutant strain didn't show a marked difference compared with those of the nuclease, of the mutant strain didn't show a marked difference compared with the wild strain, except slight increase in ribonuclease activity and slight decrease in glucoamylase activity. Avicelases from the mutant strain selected were purified from wheat bran culture by successive salting out, followed by dialysis and column chromatography, and their charcteristics were compared with thosw of the wild strain. Avicelase was separated into three peaks in the mutant strain as well as in the case of wild strain. Avicelase II activity of the mutant strain was prominently higher than that of the wild strain, while avicelase I and III activities of those were equivalent. The optimal pH ranges and stability of avicelase II from the mutant strain were pH4-5 and pH3.5-6.0, respectively, as well as in the case of the wild strain. The optimal temperature and thermal stability of avicelase II from the mutant strain were $40{\sim}50^{\circ}C\;and\;20{\sim}55^{\circ}C$, respectively. These results were same as those of the wild strain. By the using of Eadie-Hofastee plot, $K_m\;and\;V_{max}$ of avicelase II from the mutant and the wild strain were calculated to be 2.29mg/ml and $4.84{\mu}g$ reducing sugar as glucose per min equally, from the line fitted to the data by the least square method. Activity of avicelase II from the mutant strain was slightly activated by $Mg^{++}\;but\;inhibited\;by\;Cu^{++}, \;Mn^{++}\;and\;Zn^{++}$, as well as in the case of the wild strain. Therefore, it was concluded that the mutant didn't induce the formation of another avicelase isozyme, or the changes in the properties of avicelase, but induce the changes in the productively of the same avicelase II by the action of regulatory gane.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.2
• /
• pp.23-27
• /
• 2015

In this paper, eco-friendly paper strain gauge was fabricated in the way of printing strain gauge on paper substrate, using PEDOT:PSS ink and inkjet printer technology. As a p-type conductive high polymer, PEDOT:PSS is known to be piezoresistive effect. I formed a strain gauge by connecting in parallel 5 lines of $60{\mu}m$ width printed with PEDOT:PSS. To minimize surrounding influence such as temperature, I formed wheat-stone bridge by combining 4 strain gauges (quarter-bridge strain gauge) which were made up of PEDOT:PSS 5 lines and measured. In quarter-bridge strain gauge, only two strain gauges, facing each other, arranged in strain and horizontal direction were deformed while the other two strain gauge of vertical direction were not. Therefore, quarter-bridge strain gauge showed the output of half bridge. The fabricated quarter-bridge strain gauge had output sensitivity of $105.6{\mu}V/V{\cdot}mm$ and its output linearity was relatively good.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.259-262
• /
• 2009

The influence of pre-strain in low-cycle fatigue behavior of Fe-18Mn-0.05Al-0.6C TWIP steel was studied by conducting axial strain-controlled tests. As-received plates were deformed by rolling with reduction ratios of 10 and 30%, respectively. A triangular waveform with a constant frequency of 1 Hz was employed for low cycle fatigue test at the strain amplitudes in the range of ${\pm}0.4{\sim}{\pm}0.6$ pct. The results showed that low-cycle fatigue life was strongly dependent on the amount of pre-strain as well as the strain amplitude. Increasing the amount of prestrain, the number of reversals to failure was significantly decreased at high strain amplitudes, but the effect was negilgible at low strain amplitudes. A new model for predicting fatigue life of pre-strained body has been devised adding a correction term of ${\Delta}E_{pre-strain}$ to the energy-based fatigue damage parameter.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.8 no.2
• /
• pp.69-75
• /
• 2009

This study is analyzed by impact simulation according to material property at terminal case of hand phone. Maximum equivalent stress or strain at plastic is 40 times as great as that at magnesium alloy. And the next greatest stress or strain is shown at aluminium alloy. The value of maximum equivalent stress is shown as 6.5 Mpa in case of plastic, magnesium alloy and aluminium alloy. Maximum shear strain at plastic is 40 times as great as that at magnesium alloy. And the next greatest strain is shown at aluminium alloy. The value of deformation or strain at magnesium alloy and aluminium alloy is not different.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.363.2-363.2
• /
• 2016

Stretchable strain sensors are becoming essential in diverse future applications, such as human motion detection, soft robotics, and various biomedical devices. One of the well-known approaches for fabricating stretchable strain sensors is to embed conductive nanomaterials such as metal nanowires/nanoparticles, graphene, conducting polymer and carbon nanotubes (CNTs) within an elastomeric substrate. Among various conducting nanomaterials, CNTs have been considered as important and promising candidate materials for stretchable strain sensors owing to their high electrical conductivity and excellent mechanical properties. In the past decades, CNT-based strain sensors with high stretchability or sensitivity have been developed. However, CNT-based strain sensors which show both high stretchability and sensitivity have not been reported. Herein, highly stretchable and sensitive strain sensors were fabricated by integrating single-walled carbon nanotubes (SWNTs) and nylon textiles via vacuum-assisted spray-layer-by-layer process. Our strain sensors had high sensitivity with 100 % tensile strain (gauge factor ~ 100). Cyclic tests confirmed that our strain sensors showed very robust and reliable characteristic. Moreover, our SWNTs-based strain sensors were easily and successfully integrated on human finger and knee to detect bending and walking motion. Our approach presented here might be route to preparing highly stretchable and sensitive strain sensors with providing new opportunity to realize practical wearable devices.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.907-914
• /
• 2018

In this article, we conducted molecular dynamics simulations to investigate the effect of applied strain and temperature on irradiation-induced damage in alpha-zirconium. Cascade simulations were performed with primary knock-on atom energies ranging between 1 and 20 KeV, hydrostatic and uniaxial strain values ranging from -2% (compression) to 2% (tensile), and temperatures ranging from 100 to 1000 K. Results demonstrated that the number of defects increased when the displacement cascade proceeded under tensile uniaxial hydrostatic strain. In contrast, compressive strain states tended to decrease the defect production rate as compared with the reference no-strain condition. The proportions of vacancy and interstitial clustering increased by approximately 45% and 55% and 25% and 32% for 2% hydrostatic and uniaxial strain systems, respectively, as compared with the unstrained system, whereas both strain fields resulted in a 15-30% decrease in vacancy and interstitial clustering under compressive conditions. Tensile strains, specifically hydrostatic strain, tended to produce larger sized vacancy and interstitial clusters, whereas compressive strain systems did not significantly affect the size of defect clusters as compared with the reference no-strain condition. The influence of the strain system on radiation damage became more significant at lower temperatures because of less annealing than in higher temperature systems.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.1
• /
• pp.6-11
• /
• 2004

The influences of mixed strain mode of bending-tension on the critical current. Ic in externally reinforced Bi-2223 tapes and their interaction were investigated in this study. A test fixture which providing a mixed deformation mode of bending-tension to HTS tapes has been newly devised. When the total strain induced in the tape in the mixed strain mode was expressed by the superposition of the bending and tensile strains the irreversible strain for the critical current degradation of Bi-2223 tapes increased, as compared with the simple bending mode case. The $I_c$ degradation at the region exceeding the irreversible strain showed a medium between the simple bending case and the simple tension case. As the initial bending strain imparted increased , namely as the diameter of mandrel adopted decreased. the apparent irreversible strain in Bi-2223 tapes increased . but the increment became smaller As a result. it can be found that the tension to be applied to bent Bi-2223 tapes during cabling should be smaller. as the mandrel diameter becomes smaller.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.1
• /
• pp.122-126
• /
• 1997

Bifidobacteria have been known as beneficial inhabitant of human intestine. Therefore, bifidobacteria began to be noticed as a starter in the manufacture of fermented dairy products. Perhaps the key for effective use of bifidobacteria in commercial dairy products is the maintenance of viability of bifidobacteria during large scale preparation of starter culture and distribution of products. So we tried to obtain the bifidobacteria having suitable characteristics for using as a starter in the manufacture of fermented dairy products. Among bifidobacteria isolated from Korean, E-4 strain showed the highest resistance to oxygen. To know whether the selected strain will be fit for manufacture of fermented dairy products, we also investigated resistance of the selected strain to HCI. The selected strain, E-4, was more resistant to environmental stresses such as oxygen, H2O2 and HCI than Bifidobacterium longum known as resistant strain to environmental stresses. According to carbohydrate fermentation patterns and morphological characteristics, E-4 strain was identified as B. bifidum. In conclusion, the selected strain, E-4, was thought to be fit for manufacture of fermented dairy products.

• Korean Journal of Agricultural Science
• /
• v.37 no.3
• /
• pp.491-499
• /
• 2010

This study was carried out to investigate the consolidation characteristics of the remolded clay by the oedometer and the constant rate of strain(CRS) consolidation tests. As the rate of strain increases, the settlement rapidly decreased. As the ratio of the sand in the specimen increases, its effect on the rate of strain to the settlement was reduced. As the effective stress increased, the void ratio decreased, while the rate of strain increased, it did not show a clear variation. The reduction of the void ratio was shown to be less than the oedometer test. The coefficient of vertical consolidation with effective stress showed very large variation around preconsolidation stress, but the rate of strain did not provide significant effects. The rate of strain with effective stress gradually decreased at all tests and mixed ratio of sand. The rate of strain at the constant rate of strain tests showed smaller than in the oedometer test. The coefficient of consolidation at the constant rate of strain tests showed much more increase than in the oedometer test. The ratio of the vertical coefficient of consolidation by the odometer and the constant rate of strain tests showed a large difference according to various tests method and mixing ratio. Therefore, it is recommended that careful attention should be paid to designing the soft ground improvement.