• Advances in environmental research
• /
• v.6 no.1
• /
• pp.15-23
• /
• 2017

Powdered marble wastes (PMW) generated by Utique marble cutting industries (North of Tunisia) with abundant amounts were used in this study as low-cost materials to investigate the stabilization of heavy metals (Pb, Zn, Fe) in sludge generated from a local Zn-Electroplating factory. Powdered marble wastes were evaluated by means of chemical fractions of heavy metals in sludge and concentrations of heavy metals in leachate from columns to determine their ability to stabilize heavy metals in contaminated sludge. Results indicated that chemical fractions of heavy metals in sludge were affected by application of the PMW mineral materials and pH, however, the effects varied with heavy metals. Application of the powdered marble wastes mineral materials reduced exchangeable metals in the sequence of Pb (60.5%)>Fe (40.5%)>Zn (30.1%). X-ray diffraction and hydro-geochemical transport code PHREEQC analysis were successfully carried out to get a better understanding of the mechanisms of reactive mineral phases involved in reduced exchangeable heavy metals in sludge after PMW material amendments. Therefore, metal immobilization using powdered marble wastes materials is an effective stabilization technique for industrial metallic hydroxide sludge.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.131-137
• /
• 2006

This study was investigated the contents of heavy metals in plants at Dalcheun mine area, in order to offer basic data for phytoremedation on soil contamination by heavy metals. As the results of this study, the contents of Ni, As, Cd in plants were the highest at the west area of Dalcheun mine area. But the content of Zn was similar in all of Dalcheun mine area. For the herbaceous plants, the contents of heavy metals were higher in plants which were included in Gramineae and Compositae than any other families. And then the contents of Ni, Zn, Cd in root were higher $1.4{\sim}1.8$ times than stem, especially the content of As was higher 4 times. For the trees, the contents of heavy metals were usually high in Zanthoxylum piperitum, Pine tree, Chestnut tree, Quercus acutissima and Lindera obtusiloba. The contents of heavy metals with parts of tree were almost same range. All experimental result, we paid attention on two conclusions. First, the contents of heavy metals in herbs was higher than in trees. And second, if there were some spices that the content of heavy metal in leave were higher than in root, they could accumulate that kind of heavy metal. Therefore, It is above 2 times which the content of heavy metal in the leave is higher than in the root about herbs, that kind of plants was regarded as a accumulation species. According as the heavy metals, accumulation species were selected. We think that the accumulation species are able to absorb the heavy metals from the soil, they will make use of phytoremedation on contaminated soil by heavy metals.

• Journal of environmental and Sanitary engineering
• /
• v.17 no.3
• /
• pp.7-13
• /
• 2002

The removal efficiency of heavy metals by chitosan complex isolated from biological industrial waste was investigated through laboratory experiments. The results of the study are as follows. The adsorption kinetics of heavy metals were reached the equilibrium adsorption in approximately 30 minutes and the removal efficiency were showed 70.7～97.4%. The effect of temperature on heavy metals adsorption by chitosan complex shows that as the temperature increased, the amount of heavy metals adsorption per unit weight of chitosan complex increased. The correlation between amount of heavy metals adsorption per unit weight of chitosan complex and temperature were obtained through the coefficient of determination($R^2$). $R^2$ values were 0.75(p<0.05), 0.99(p<0.05) and 0.98(p<0.05) in Hg, Mn, and Zn, respectively. The injected chitosan complex in which 0.1 g was adsorpted highly and the removal of heavy metals was found to have the best removal efficiency A linearized Freundlich equation was used to fit the acquired experimental data. As a result, Freundlich constants, the adsorption intensity(I/n) was 0.5564, 0.4074, 0.5244 on the Hg, Mn, Zn, respectively And the measure of adsorption(k) was 2.2144, 1.6963, 2.0792 on the Hg, Mn, Zn, respectively. So, it was concluded that adsorption of heavy metals by chitosan complex is effective.

• Economic and Environmental Geology
• /
• v.33 no.1
• /
• pp.31-40
• /
• 2000

Sorption characteristics of Pb, Cu, Cd, and Zn onto Ca- and Na-bentonites were investigated by the batch experiments in the condition of various pHs and concentrations of groundwater major anions (${So_4}^{2-}$ and ($HCO_3$), which can form a complex with heavy metals. The sorption removal of heavy metals steadily increases as pH increases. The sorption capability about heavy metals of both Ca-bentonite and Na-bentonite is in the order of Pb>Cu>Zn>Cd. The effect of pH and selectivity of heavy metals of bentonites were explained by the change of surface charge of bentonite and the speciation of heavy metals. Na-bentonite has a little higher sorption ability about heavy metals than that of Ca-bentonite. A high sorption removal of Pb in 0.1M sulfate solution may be attributed to the precipitation of $PbSo_4$(anglesite). However, sulfate has a slight effect on the sorption of CU, Cd and Zn. More than 99% of heavy metals were removed from the 0.1 M bicarbonate solution. However, the efficiency of sorption removal of heavy metals highly decreases in the bicarbonate solution of $10^{-2}$M to $10^{-4}$M. The speciation and saturation index calculated by the WATEQ4F program indicate that the sorption of anionic complexes such as ${Pb(CO_3)_2}^{2-}$, ${Cd(CO_3)_2}^{2-}$, ${Zn(CO_3)_2}^{2-}$, ${Cu(CO_3)_2}^{2-}$ and the precipitation of the solid phases such as $PbCO_3$(cerrusite), $ZnCO_3$(smithsonite), $CdCO_3$(obtavite) are involved in sorption removal of heavy metals in bicarbonate solution. The sorption capability about heavy metals of bentonites in the presence of anions shows the following order: Pb>Cu Cd>Zn.

• Journal of Environmental Science International
• /
• v.3 no.4
• /
• pp.409-416
• /
• 1994

This study was Performed to evaluate the contents of heavy metals in water, sediment and soil of the 7 different sampling points along the West Nakdong river, The results were as follows: the concentrations of Zn, p, Pb, Cd, Mn, Cu and As in the sediment were 197.48, 551.85, 67.01, 2.54, 491.39, 42.95 and 10.52ppm, respectively. The concentrations of Zn, p, Pb, Cd, Mn, Cu and As in the soil was 83.32, 482.89, 17.15, 1.02, 226.02, 26.15 and 7.29ppm, respectively. The concentration ratios of heavy metals In the water to the sediment were 593 - 12700 (Cd >> Cu > Zn > Mn > As > Pb) and that of the water to the soil were 152 - 5100 (Cu > Cd > Zn > Mn > As >Pb). The correlation coefficients of Cu and Pb weve high among the water, sediment and soil. Because the accumulation amounts of heavy metal in the sediment were high, the concentration of heavy metals in the sediment was higher than in soil. The correlation coefficient of heavy metals among water, sediment and soil was high (0.79 - 0.95). Key Words Distribution Characteristics, heavy metals, West Nakdong River.

• Journal of Soil and Groundwater Environment
• /
• v.15 no.5
• /
• pp.16-22
• /
• 2010

Heavy metals in soils exist in various forms dependent upon surrounding conditions. As the Janghang smelter area is of concern for its high elevated heavy metal concentrations, Korean government decided to remediate the area. Main objectives of this research were; to analyze heavy metal concentrations and their existing forms in the vicinity of the smelter; and to understand differences made by analysis techniques of heavy metals. Top soils of rice field, crop field, bare field, and forestry in the area were sampled and analyzed for their physicochemical characteristics. Concentrations of Cu, Cd, Pb, and As were analyzed with two pretreatment techniques adopted using 0.1 N HCl and aqua regia. To analyze existing forms of heavy metals, Tessier's schemes for sequential extraction technique were adopted. Exchangeable fraction and carbonate bound fraction of heavy metals may pose potential threat to environment and were in the order of Pb > As > Cu > Cd. If assessing mobile fraction of heavy metals by land uses, the order was forestry > bare land > crop field > rice field. When analyzed using Tessier's scheme, high ratio of residual fractions to total arsenic concentration should be considered for remediation design of the area.

• Nutritional Sciences
• /
• v.2 no.2
• /
• pp.88-92
• /
• 1999

The purpose of this study was to study the intake of heavy metals such af arsenic, lead and cobalt and the relationship of dietary heavy metals with serum iron, topper, and zinc, which play important roles in hematopoiesis, in healthy college women living in Choongnam Korea, where we have detected heavy metals (As, Pb, Co) in some marine products in previous studies. The nutritional status of the subjects (35 women) was evaluated by anthropometric measurements, 24-hr dietary recall for 3 days. And 3-day diets (by weighing method) and blood were collected to analyze As, Pb, Co, Fe, Cu, Zn, Hb, Hct, and MCHC. The mean age, height, weight, and BMI were 20 years, 158 cm, 55 kg and 22.42 kg/$m^2$, respectively. The mean daily energy intake was 85.85% of RDA for Koreans. The ratio of energy from carbohydrate, protein, and fat was 60 : 24 : 16. The mean daily intake of heavy metals (As, Pb, Co) was 1.77 mg/day, 75.21 $\mu$g/day and 21.12 $\mu$g/day. And the mean daily intake of iron, copper, and Zinc concentrations were 97, 68, and 92% of normal values. The mean serum heavy metals (As, Pb, Co) were 16.14 $\mu$g/dl, 4.32 $\mu\textrm{g}$/dl and 0.02 $\mu$g/dr, respectively Mean blood levels of Fe, Cu, Zn, Hb, Hct, and MCHC were at normal levels. Dietary heavy metals except Co were not significantly different from serum Fe, Cu, Zn and Hb, Hct, and MCHC. However, there was a tendency toward lower serum concentration of Fe, Hb, Hct, and MCHC in the subjects with higher heavy metals (As) intake. Among heavy metals, only dietary Co showed a significant negative correlation with Hb (p< 0.001) and Hct (p < 0.001).

• Journal of Environmental Science International
• /
• v.16 no.2
• /
• pp.241-245
• /
• 2007

We studied concentration of heavy metals in Sagunjatang. In this experiment was analyzed the concentration of heavy metals of boiled Sagunjatang, decoction and its ingredient herbal medicines. The concentration of heavy metals(As, Pb, and Cd) were analysed using ICP-AES, and Hg was analysed by mercury analyzer. The average concentration of heavy metals in Sagunjatang were as follows : In all ingredient herbal medicines (Glycyrrhizae Radix, Atractylodes Macrocephala, Poria Cocos and Jinseng) of Sagunjatang, As(arsenite) contents in ail samples was in the range of 0.369-0.723ppm, Cd(cadmium) was in the range of 0.000-0.085ppm, Pb(lead) was in the range of 0.059-0.871ppm and Hg(mercury) was in the range of 0.001-0.004ppm. In boiled Sagunjatang, the concentration of heavy metals(As, Pb, Cd and Hg) was in the range of 0.000-0.016ppm, respectively. In the decoction of herbal medicines after boiled, the concentration of heavy metals was in the range of 0.004-0.387ppm. These results suggest that Sagunjatang which we take is less harmful than herbal medicine itself, and there are more significant for using the decoction of herbal medicines.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.4
• /
• pp.600-614
• /
• 2011

Classical methods which used for removal of heavy metals from contaminated water are adsorption, precipitation, coagulation, ion exchange resin, evaporation, and membrane processes. Microbial biosorption can be used for the removal of contaminated waters with pollutants such as heavy metals and dyes which are not easily biodegradable. Microbial biosorbents are inexpensive, eco friendly and more effective for the removal of toxic metals from aqueous solution. In this review, the bacterial and fungal abilities for heavy metals ions removal are emphasized. Environmental factors which affect biosorption process are also discussed. A detailed description for the most common isotherm and kinetic models are presented. This article reviews the achievements and the current status of bacterial and fungal biosorption technology for heavy metals removal and provides insights for further researches.

• Journal of Magnetics
• /
• v.11 no.2
• /
• pp.98-102
• /
• 2006

It was examined in this study that magnetic beads, which are assumed to be environmentally functional, could be effective in processing heavy metals that are water pollutants. For the purpose, magnetic beads containing carboxyl groups, which has strong binding force with heavy metals, are mixed with each Cd, Pb, Ni, Cu and Cr(III) solution, then stirred in pH 6. As a results of the process, it was proven that heavy metals bind quickly with magnetic beads through the reaction. In order to analyze heavy metal concentration, magnetic beads bind with heavy metal were collected by external magnetic force and dissolved in acid. The graphite furnace AAS was used to get heavy metal concentration melted in the acid solution. The results showed that heavy metal extractions by magnetic beads were influenced by the type and the concentration of a heavy metal, and over 90% of a heavy metal can be extracted in ppm level save for Cr(III). It was also examined in the study whether heavy metal extraction is influenced when other ions exist in each heavy metal solution. According to experiment, adding other heavy metals to a solution did have little influence on extracting an intended heavy metal. But in case salt or heavy metal chelate was added, Ni extraction changed sensitively although extracting other heavy metals were influenced only when the concentration of an added substance is high. In conclusion, it was shown that magnetic beads could be used to treat wastewater with relatively high heavy metal concentration.