• Environmental Analysis Health and Toxicology
• /
• 제14권4호
• /
• pp.155-163
• /
• 1999

Heavy metal accumulation in living organisms through food-wed can give serious damage on physiological responses for vital activities. The initiation of heavy metal supposed to begin from the bio-accumulation of plants. To establish basic data fur heavy metal contents in plants at the area without artificial contamination, both woody and herb plants at Mt. Kwang-Duk were studied. The content of heavy metals in various organs of plants were analyzed by ICP. The range of heavy metals in plants for Al, As, Cd, Co, Cr, Cu, Fe. Mn, Pb, Se and Zn were 1.019∼257.200ppm, O∼2.929ppm, 0∼0.079ppm, 0∼0.054ppm, 0.023∼3.007ppm, 0∼1.997ppm, 2.031∼148.500ppm, 1.069∼51.320ppm, O∼126.900ppm, 0.708∼4.927ppm and 0.846∼4.949ppm, respectively. The amount of heavy metals in plants are much less than that of soil except some species. In woody plants, it was detected that the metal contents of leaves were higher than that of stems especially in case of Al and Fe with statistical significance. There were significant differences between shoots and roots of herb plants in metal content of Al, Co and Fe. Those metals have more accumulated in roots comparing with shoots. Some species of plants had shown the difference tendency of heavy metal accumulation. Generally, most species had not exceeded over twice of mean value each other, and had various difference according to the kinds of heavy metals.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.268-269
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• ETRI Journal
• /
• 제20권1호
• /
• pp.55-73
• /
• 1998

In this paper we analyze the technological accumulation processes in the Korean semiconductor industry from the institutional approach. Institutional approach, which is closely connected with Neo-Schumpeterian tradition, has emerged as an alternative theoretical framework to neoclassical approach to understand the process of producing technological knowledge. Traditional wisdom of neoclassical approach revealed the limitation to explain the complex nature of knowledge creation and diffusion. US patent data are analyzed in terms of the increasing trend of numbers and its content to measure the rate and direction of technological capability accumulation. This analysis shows that semiconductor technologies are one of the fastest growing fields among Korean technological activities. Moreover, the analysis of patent content suggests that fabrication technologies are the most important area within the technological development of semiconductors, whilst circuit design and testing technologies are beginning to increase in significance. In addition, it is examined how private sectors and public institutions have contributed to generate technological capabilities, and the relationship between them has been changed during the development processes. It is found that Korean firms enhanced their technological capabilities from the learning and assimilation of imported technology to enhanced in-house R&D capabilities in the later stage. The support of public institution and government policy also played significant role to this successful transformation in conjunction with vigorous R&D investment of public sector.

• Structural Engineering and Mechanics
• /
• 제28권4호
• /
• pp.387-410
• /
• 2008

The fatigue damage accumulation rates of horizontally curved thin walled box-girder bridge have been estimated from vehicle-induced dynamic stress history using rain flow cycle counting method in the time domain approach. The curved box-girder bridge has been numerically modeled using computationally efficient thin walled box-beam finite elements, which take into account the important structural actions like torsional warping, distortion and distortional warping in addition to the conventional displacement and rotational degrees of freedom. Vehicle model includes heave-pitch-roll degrees of freedom with longitudinal and transverse input to the wheels. The bridge deck unevenness, which is taken as inputs to the vehicle wheels, has been assumed to be a realization of homogeneous random process specified by a power spectral density (PSD) function. The linear damage accumulation theory has been applied to calculate fatigue life. The fatigue life estimated by cycle counting method in time domain has been compared with those found by estimating the PSD of response in frequency domain. The frequency domain method uses an analytical expression involving spectral moment characteristics of stress process. The effects of some of the important parameters on fatigue life of the curved box bridge have been studied.

• 한국전산유체공학회지
• /
• 제18권1호
• /
• pp.91-97
• /
• 2013

In the present study, the effects of contaminant accumulation and surface roughness on the aerodynamic performance of wind turbine blade sections were numerically investigated by using a flow solver based on unstructured meshes. The turbulent flow over the rough surface was modeled by a modified ${\kappa}-{\omega}$ SST turbulence model. The calculations were made for the NREL S809 airfoil with varying contaminant sizes and positions at several angles of attack. It was found that as the contaminant size increases, the degradation of the airfoil performance becomes more significant, and this trend is further amplified near the stall condition. When the contaminant is located at the upper surface near the leading edge, the loss in the aerodynamic performance of the blade section becomes more critical. It was also found that the surface roughness leads to a significant reduction of lift, in addition to increased drag.

• 대한핵의학회지
• /
• 제20권1호
• /
• pp.33-37
• /
• 1986

It is well known that $^{99m}Tc-sulfur$ colloid or phytate hepatic scintigraphy is highly sensitive but not specific. Both $^{99m}Tc-DISIDA$ and bilirubin have been shown to share the same anionic transport pathway in the liver. Hepatocellular carcinoma(HCC) retains the ability to produce bile but has marked limitation to excreting it resulting in accumulation of bile within the tumor cells. Based upon such a fact, $^{99m}Tc-DISIDA$ hepatobiliary scintigraphy is used for the diagnosis of HCC. The present communication deals with our experience of DISIDA scintigraphic exploration of 9 cases of HCC in a retrospective way. We have made an observation on intensity of positive radio nuclide accumulation in the cold area of HCC as it is demonstrated by phytate scintigraphy. In addition we have semi quantitatively analyzed time-activity pattern and the following results were obtained. (1) All of 9 cases showed an increased uptake of $^{99m}Tc-DISIDA$ in delayed scintigrams. Of these 5 cases showed accumulation less than, 3 equal to, 1 more than the surrounding liver tissue. (2) The mean of the first appearing time of $^{99m}Tc-DISIDA$ activity in tumoral region was 2 hours and 20 minutes. (3) DISIDA scintigraphy provides us with positive informations of diagnostic value.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.452-452
• /
• 2011

Using ab initio calculations, we reveal the origins of the extraordinarily increased electric conductivity of the LaAlO3/SrTiO3 interface. In both of the two (LaAlO3)m/ SrTiO3 heterojunction models (m=3, 5), the oxygen atoms in the cells were displaced toward the n-type interface and the Ti-centered octahedron structure was compressed along the [001] direction by the atomic reconstructions at the (LaAlO3)m/(SrTiO3)4 interfaces. As a result, the 3dxy orbital of the Ti atom was preferentially occupied due to the lowered energy state of the 3dxy orbital, which arises from the crystal field asymmetry. We reason that the extra electrons occupy the 3dxy orbital are accumulated at the interface by the displacement of the oxygen atoms. This accumulation contributes to the conductivity of the n-type interface. In addition, through a comparison of the atomic displacements and charge accumulation amounts between the two thickness models (m=3, 5), the thickness-dependency of the conductivity can be explained.

• 미생물학회지
• /
• 제12권3호
• /
• pp.115-130
• /
• 1974

Searches for the nutrition requirements of three strains of Brevibacterium ammoniagenes reported in the previous paper were carried out with an aim of achieving the striking accumulation of L-glutamic acid and the large multipication of cells. It was recognized that all three strains required both biotin and thiamine, together with amino acids such as histidine or cysteine, for their good growth and extracellular L-glutamic acid accumulation. The quantity of biotin required for remarkable growth of these microorganisms was quite different from that for the maximum production of L-glutamic acid. This result, however, did not apply in the case of thiamine. It was also confirmed that, of 18 amino acids, histidine and cysteine were the msot effective organic nitrogen sources, while the most available inorganic ammonium salt resulting in a large amount of L-glutamic acid-production and considerable cell gorwth was found to be only urea. Maximum accumulation of extracellular L-glutamic acid, more than 50%(w/w) of the initial sugar content, could be obtained from fermentation in the medium containing wheat-bran extract(Brev. ammoniagenes T-1 and Brev.ammoniagenes Y-2) or rice-bran extract(Brev. ammoniagenes YR-2), which confirmed us a possibility that these bacteria might be employed for industrial fermentation of L-glutamic acid.

• 한국작물학회지
• /
• 제50권1호
• /
• pp.45-54
• /
• 2005

This study was carried out to investigate the patterns of dry matter (DM) production and accumulation, and to screen the relationships between related major growth characters and DM accumulation in four cassava varieties in Bogor $(6^{\circ}19'-6^{\circ}47'S,\;106^{\circ}21'-107^{\circ}13'E)$, West Java, Indonesia. Gading and Adiral developed an enough source and canopy in short at the early growth phase and then translocated assimilates to storage roots with a higher partitioning rate, even these varieties were considered as early-bulking varieties, which have superior source and sink potentials in increasing yield and DM of tubers. The root/shoot ratio (R/SR), total dry weight (TDW), leaf area duration, leaf area index (LAI), and number of tubers showed higher positive correlations with the dry weight of roots (DWR), and the direct effects of TDW, R/SR, and LAI on the DWR were higher. These characters were considered to be useful target characters to screen cassava varieties with high yield potential and high DM in aspect of tuber production.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.377-378
• /
• 2008

Space charge formation in various glass materials under electron beam irradiation was investigated. Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples. Furthermore, the dependence of the polarity of accumulated charges on the component of glass materials is discussed by using the models of energy bands.