• 한국안광학회지
• /
• 제3권1호
• /
• pp.223-228
• /
• 1998

$SiO_2-TiO_2-M_xO_y$ (M = Co, Cr or Cu)계의 비정질 박막을 현미경용 슬라이드 유리판 위에 전구체 용액을 스핀코팅방법으로 제조하였다. 전구체 용액은 tetraethyl orthosilicate, titanium trichloride, 그리고 코발트질산염, 크롬질산염, 구리질산염을 사용하여 합성하였다. X-선 회절분석 (${\theta}-2{\theta}$ scan)을 통하여 박막내에 $Co_3O_4$, $Cr_2O_3$, CuO 결정의 석출이 없는 비정질 박막임을 확인하였다. 코발트는 4면체배위의 $ Co^{2+}$로, 크롬은 4면체정배위의 $Cr^{6+}$로, 구리는 8면체배위의 $Cu^{2+}$로 존재하였다. 이 비정질박막의 표면에서 crack과 texture는 발견할 수 없었으며 파단면에서 박막악과 유리판 간의 계면은 균일한 조직을 보였다.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.391-398
• /
• 2005

It is known that $BaMgAl_{10}O_{17}:Eu^{2+}(BAM)$ phosphors currently used have a serious thermal degradation problem. We screened $SrO-B_2O_3-P_2O_5$ system by a solution combinatorial chemistry technique in an attempt to search for a thermally stable blue phosphor for PDPs. A Quantitative Structure Activity Relationship (QSAR) was also obtained using an artificial neural network trained by the result fiom the combinatorial screening. As a result, we proposed a promising composition range in the $SrO-B_2O_3-P_2O_5$ ternary library. These compositions crystallized into a single major phase, $Sr_6BP_5O_{20}:Eu^{2+}$. The structure of $Sr_6BP_5O_{20}:Eu^{2+}$ was clearly determined by ab initio calculation. The luminescent efficiency of $Sr_6BP_5O_{20}:Eu^{2+}$ was 2.8 times of BAM at Vacuum Ultra Violet (VUV) excitation. The thermal stability was also good but the CIE color chromaticity was slightly poor.

• 한국전기전자재료학회논문지
• /
• 제25권6호
• /
• pp.435-438
• /
• 2012

As lead-free piezoelectric materials, $Ag_2O$ doped $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3+x$ mol% (where x = 0, 0.5, 1, 1.5, 2, 2.5 and 3, respectively) ceramics were fabricated by a conventional sintering process. The doping effects on the microstructure and electrical properties of the $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3$ ceramics were systematically investigated. When the 3 mol % $Ag_2O$ doped $0.95(K_{0.5}Na_{0.5})NbO_3-0.05LiNbO_3$ samples were sintered at $1,080^{\circ}C$ for 5 hrs in air, these ceramics showed excellent values of density=4.20 $g/cm^3$, piezoelectric constant ($d_{33}$)=174 pC/N and phase transition temperature$(T_c)=421.6^{\circ}C$, respectively.

• 센서학회지
• /
• 제30권6호
• /
• pp.376-380
• /
• 2021

The accurate detection of hydrogen gas molecules is considered to be important for industrial safety. However, the selective detection of the gas using semiconductive metal oxides (SMOs)-based sensors is challenging. Here, we describe the fabrication of H₂ sensors in which a nanocellulose/graphene oxide (GO) hybrid membrane is attached to SnO₂ nanosheets (NSs). One-dimensional (1D) nanocellulose fibrils are attached to the surface of GO NSs (GONC membrane) by mixing GO and nanocellulose in a solution. The as-prepared GONC membrane is employed as a sacrificial template for SnO₂ NSs as well as a molecular sieving membrane for selective H₂ filtration. The combination of GONC membrane and SnO₂ NSs showed substantial selectivity to hydrogen gas (R_air / R_gas > 10 @ 0.8 % H₂, 100 ℃) with noise level responses to interfering gases (H₂S, CO, CH₃COCH₃, C₂H₅OH, and NO₂). These remarkable sensing results are attributed mainly to the molecular sieving effect of the GONC membrane. These results can facilitate the development of a highly selective H₂ detector using SMO sensors.

• 한국전기전자재료학회논문지
• /
• 제30권12호
• /
• pp.788-793
• /
• 2017

Electrical behaviors of plasma-sprayed $Al_2O_3-TiO_2$ coatings have been investigated in terms of their $TiO_2$ content. On increasing the $TiO_2$ content from 6 to 30 wt%, the DC electrical conductivity increased by several orders of magnitude. From impedance spectroscopy analysis, the total conductivity of the grains and grain boundaries and their respective activation energies were determined without the electrode effects that could impede ionic transfer. An electron transference number was also estimated, ranging between 6.5% and 7.3% for 13 wt% $TiO_2$ and between 0.4% and 0.7% for 30 wt% $TiO_2$ in the coating. Because of the high electronic contribution to the total conductivity, the $Al_2O_3-TiO_2$ coating could be a new candidate material to obtain superior electrical conductivity as well as corrosion and wear resistances.

• 한국전기전자재료학회논문지
• /
• 제28권6호
• /
• pp.379-383
• /
• 2015

Some insulating materials are organized and analyzed with variables to obtain the optimized profile of encapsulated three phase of epoxy barrier which is applied to gas compartment and supporting conductors for high voltage GIS (gas insulated switchgear). The high voltage GIS is used in electrical power system and operating reliability. In this paper, optimization possibility of barrier shape including both electrical insulation performance and mechanical strength, premised on that condition minimizing volume and light weight should be kept for high voltage GIS, could be achieved by analysis simulation. As a result, filling material which is lower permittivity such as $SiO_2$ instead of $Al_2O_3$ properly to the epoxy material, can be improved to increase the electrical insulation performance and mechanical strength for an optimized profile barrier of a high voltage GIS.

• Journal of Electrical Engineering and Technology
• /
• 제10권6호
• /
• pp.2343-2347
• /
• 2015

This paper reports the effect of Titanium dioxide (TiO₂) nanoparticles on a TiO₂ sol-gel Schottky diode. TiO₂ nanoparticles were blended with TiO₂ sol-gel to fabricate the Schottky diode. TiO₂ nanoparticles showed strong anatase and rutile X-ray diffraction peaks. However, the mixture of TiO₂ sol-gel and TiO₂ nanoparticles exhibited no anatase and rutile peaks. The forward current of the Schottky diode drastically increased as the concentration of TiO₂ nanoparticles increased up to 10 wt. % and decreased after that. The possible conduction mechanism is more likely space charge limited conduction.

• 한국세라믹학회지
• /
• 제44권6호
• /
• pp.291-296
• /
• 2007

Porous $Al_2O_3-(m-ZrO_2)$ composites were fabricated by pressureless sintering, using different volume percentages (40% - 60%) of poly methyl methacrylate (PMMA) powders as a pore-forming agent. The pore-forming agent was successfully removed, and the pore size and shape were well-controlled during the burn-out and sintering processes. The average pore size in the porous $Al_2O_3-(m-ZrO_2)$ bodies was about $200\;{\mu}m$ in diameter. The values of relative density, bending strength, hardness, and elastic modulus decreased as the PMMA content increased; i.e., in the porous body (sintered at $1500^{\circ}C$) using 55 vol % PMMA, their values were about 50.8%, 29.8 MPa, 266.4 Hv, and 6.4 GPa, respectively. To make the $Al_2O_3-(m-ZrO_2)$/polymer hybrid composites, a bioactive polymer, such as PMMA, was infiltrated into the porous $Al_2O_3-(m-ZrO_2)$ composites. After infiltration, most of the pores in the porous $Al_2O_3-(m-ZrO_2)$ composites, which were made using 60 vol % PMMA additions, were infiltrated with PMMA, and their values of relative density, bending strength, hardness, and elastic modulus remarkably increased.

• Transactions on Electrical and Electronic Materials
• /
• 제7권3호
• /
• pp.123-128
• /
• 2006

The microstructure and electrical properties of the varistors, which are composed of $ZnO-Pr_6O_{11}-CoO-Cr_2O_3-La_2O_3-based$ ceramics, were investigated for different $La_2O_3$ contents. The increase of $La_2O_3$ content led to more densified ceramics, whereas abruptly decreased the nonlinear properties by incorporating beyond 1.0 mol%. The highest nonlinearity was obtained from 0.5 mol% $La_2O_3$, with the nonlinear coefficient of 81.6 and the leakage current of $0.2{\mu}A$. The increase of sintering time and temperature greatly decreased the nonlinear properties. As the $La_2O_3$ content increased, the donor density increased from $0.64\times10^{18}/cm^3\;to\;16.89\times10^{18}/cm^3$ and the barrier height greatly decreased with increasing $La_2O_3$ content, reaching a maximum (1.47 eV) in 0.5 mol% $La_2O_3$.

• 한국임상수의학회지
• /
• 제22권1호
• /
• pp.16-20
• /
• 2005

본 연구는 VEGF로 유발된 랫드 각막 미세낭 모델에서 As₄O/sub 6/와 As₂O₃ 혈관신생 억제효과를 비교하기 위해 실시하였다. 20ng VEGF가 함유된 펠렛을 이식하여 혈관신생을 유도하였다. 안과 검사후 정상적인 각막을 가진 Sprague-Dawley 랫드의 안구 60안을 이용하여 각 20안씩 무작위로 선정하여 대조군(비투약군), As₂O₃군(50mg/kg As₂O₃, 경구투여, 1일 1회), 그리고 As₄O/sub 6/군(50mg/kg As₄O/sub 6/, 경구투여, 1일 1회)으로 나누어 실시하였다. 이식이 완료된 후, 신생혈관의 개수, 길이 및 신생혈관의 각도를 미세수술현미경하에서 이식 3일째부터 9일째까지 매일 검사하였다. 신생혈관의 넓이는 신생혈관의 길이와 각도를 수학적인 공식에 적용하여 계산하였다. 실험 기간동안 As₄O/sub 6/군의 신생혈관 개수, 길이, 각도 및 넓이가 대조군과 As₂O₃군에 비하여 유의성 있게 억압되었다. (P<0.05). 이러한 결과 As₄O/sub 6/는 랫드 각막에서 VEGF에 의해 유도된 신생혈관에 As₂O₃보다 더 뛰어난 억제효과를 가지고 있음을 보여주었다.