• 한국세라믹학회지
• /
• 제32권9호
• /
• pp.1040-1046
• /
• 1995

The formation free energy of Y2Cu2O5 was measured by the partial ion exchanged (Cu2+, Na+)-$\beta$/$\beta$"-Al2O3 as solid state electrolyte. The formation cell was built as follows: Pt(O2)/Y2Cu2O5＋Y2O3//(Cu2+, Na+)-$\beta$/$\beta$"-Al2O3//CuO/(O2)Pt The virtual formation formation formula, and the calculated formation free energy of Y2Cu2O5 as a function of temperature are as follows: 2CuO＋Y2O3=Y2Cu2O5 ΔfG0/kJ.mol-1=13.19-16.25*10-3T/K.5*10-3T/K.

• 한국세라믹학회지
• /
• 제13권2호
• /
• pp.24-30
• /
• 1976

To observe the influence of tetrahedral and octahedral preference of cations of Ni2+, Ti4+ upon the formation and the color development of the MgO-SnO2 spinel containing Ni2+ and Ti4+ ions, the gradual substitution of Ni2+ ions for Mg2+ ions and of Ti4+ ions for Sn4+ ions of the spinel in NiO-MgO-SnO2-TiO2 system was carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stability as a glaze pigment were also carried out. On samples prepared by calcining the oxide and basic carbonate mixtures at 130$0^{\circ}C$ for 1.5 hour, the X-ray analysis, measurement of reflectance and the test of their stabiality as a glaze pigment were also carried out. The results are summarized as follows. 1) As increasing the amounts of Ni2+ ions in the xNiO.(2-x)MgO.SnO2 system, spinel was not formed easily, and the mixed-spinel was formed in NiO.MgO.SnO2 of x=1 but the spinels was not formed completely in the range of x>1.5 2) The spinels was not more formed in NiO-MgO-TiO2 system than NiO-MgO-SnO2 system. Therefore, Ti4+ ions have strong octahedral preference than Sn4+ ions. The color changed the yellow region little. The mixed-spinel or non-spinel was formed easily NiO.TiO2, MgO.TiO2 of illmenite type as the gradual substitution of Ti4+ ions for Sn4+ ions. 3) The results of glaze test. The color changed from white through graish brown to brown as the gradual substitution of Ni2+ ions for Mg2+ ions in calcium-zinc glaze and calcium glaze, and from white through light yellowish beige to dull beige in tile glaze. Also, the color did not change generally as the gradual substitution of Ti4+ ions for Sn4+ ions in NiO-MgO-SnO2-TiO2 system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.543-546
• /
• 2004

The melting temperature and critical temperature(Tc) of $YBa_2Cu_3O_x$ with deferent content impurities of PbO and $BaPbO_3$ were studied. When the PbO was used as addition in $YBa_2Cu_3O_x$, although the melting point could be reduced, the superconductivity(the transition width, ${\Delta}T_c$) became poor. From the XRD pattern of the sintered mixture of $YBa_2Cu_3O_x$ and PbO it was known that there is a reaction between $YBa_2Cu_3O_x$ and PbO, and the product is $BaPbO_3$. In the process of the reaction the superconducting phase of $YBa_2Cu_3O_x$ was decreased and in the sample $BaPbO_3$ became the main phase. Therefore the superconductivity was reduced. $BaPbO_3$ was chosen as the impurity for the comparative study. The single phase BaPbO3 was synthesized by the simple way from both mixtures of $BaPbO_3$ and PbO, $BaPbO_3\;and\;PbO_2$. Deferent contents of $BaPbO_3$(10%, 20%, 30%) were added in the $YBa_2Cu_3O_x$. By the phase analysis in the XRD patterns it was proved that there werenot reactions between $YBa_2Cu_3O_x$ and $BaPbO_3$. When $BaPbO_3$ was used as impurity in $YBa_2Cu_3O_x$ the superconductivity was much better than PbO as impurity in $YBa_2Cu_3O_x$. But the melting point of $YBa_2Cu_3O_x$ with $BaPbO_3$ could not be found when the temperature was lower than $1000^{\circ}C$ in the DTA measurement.

• 한국세라믹학회지
• /
• 제15권1호
• /
• pp.9-15
• /
• 1978

The possiblity of mullitization from the domestic alunite by adding of $Fe_2O_3-MnO_2$, $Fe_2O_3-MnO_2-TiO_2$, $Fe_2O_3-MnO_2-CaF_2$, and $Fe_2O_3-MnO_2-CaF_2-TiO_2$ mixtures as mineralizers was studied at the temperature range between $1, 250^{\circ}C$~$1, 430^{\circ}C$. The modifying method of domestic alunite was performed by calcination, wet ballmilling, and washing with water. The following results were obtained; 1) When added of 3.0% $Fe_2O_3$ plus 1.0-1.5% $MnO_2$ to modified alunite, the appropriate temperature range of mullite-forming was $1, 350^{\circ}C$-$1, 400^{\circ}C$. 2) When added of $TiO_2$ as mineralizer, the mullite-forming temperature was higher than not added. 3) When added of $CaF_2$ as mineralizer, the synthesized mullite was resolve at the temperature above $1, 350^{\circ}C$.

• 한국세라믹학회지
• /
• 제25권2호
• /
• pp.117-124
• /
• 1988

The properties of the powders of the system Al2O3-ZrO2-Y2O3 prepared by precipitation method were investigated. Al2(SO4)3$.$18H2O3, ZrOCl2$.$8H2O and YCl3$.$6H2O were used as starting materials. Amorphous aluminum hydrate prepared by precipitation method was completely transformed to alpha Al2O3 as a result of calcining at 1100$^{\circ}C$ for 1 hr and gamma, delta and theta phases appeared as transition phases. In ZrO2-Y2O3 system prepared by co-precipitation method, the crystallization temperature of ZrO2 was increase with Y2O3 contents. The coupled crystallization occured in coprecipitated Al2O3-ZrO2-Y2O3 system, therefore the formation temperature of alpha Al2O3 and ZrO2-Y2O3 system. In this ternary system, the powder morphology showed a particular shape which was composed of large Al2O3 grains having small spherical ZrO2 particles within large Al2O3 grain and relatively large ZrO2 particles along the grian boundaries.

• 한국세라믹학회지
• /
• 제22권4호
• /
• pp.54-60
• /
• 1985

Gas sensing materials for detecting flammable gases such as $CH_4$, $C_3H_8$ and n-$C_4H_{10}$ were developed by util-izing $In_2O_3$ as the principal sensing material. The sensing materials were formulated by mixing $In_2O_3$ powder with one or two other chemicals such as $SnO_2$, $Y_2O_3$ and $Al_2O_3$ with a small addition of $PdCl_2$ as a catalyst. Sample of sensor were fabricated by coating each of the mixtures on a ceramic tube impregnating ethylsili-cate and firing at 75$0^{\circ}C$ Each material mixture was evaluated by measuring and comparing gas sensitivity(resistance in air/resistance with gas) to flammable gases such as $CH_4$, $C_3H-8$ and n-$C_4H_{10}$. It was found that among fifteen compositions tested three compositions as follows show the highest gas sensitivity and thus are very feasible for commercialization as the gas sensors ; o49.5 $In_2O_3$+50 Al2O3_0.5 PdCl2(wt%) o $20In_2O_3+29$ $SnO_2+50$ $Al_2O_3+1$ $PdCl_2$(wt%) o40 $In_2O_3$+9 $Y_2O_3+50$ $Al_2O_3+1$ $PdCl_2$(wt%)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.383-386
• /
• 1999

The importance of rechargeable lithium cells has been emphasized. So a large variety of materials has been discovered and evaluated for use as reversible cathodes and electroyltes. This paper examines the charge/discharge properties and the charge/discharge cycling life of Li$_2$O-P$_2$O-V$_2$O$_{5}$Li cells. In audition, DTA tests were carried out on Li$_2$O-P$_2$O-V$_2$O$_{5}$ glass. As a result the best performance was achieved when 0.3Li$_2$O-0.1P$_2$O$_{5}$-0.6V$_2$O$_{5}$Li cells was mixed with SP270. that is discharge capacity of 240mAh/g have been achieved. In addition this battery exhibited good cycling performance. Considering these results we expected utilization of the Li$_2$O-P$_2$O-V$_2$O$_{5}$ glass as a cathode material in a secondary battery.y battery.

• Asia pacific journal of information systems
• /
• 제33권2호
• /
• pp.298-317
• /
• 2023

This study is about the attitudes and intentions of consumers considering the usage of O2O application (app) under the COVID-19 situation. By integrating TAM and TPB as a theoretical background, we selected VPC (various product choice) and PII (product information intensity) as new functional external variables that have a positive effect on new system called O2O commerce. We also applied the transaction cost theory to investigate the obstacle of O2O business. We conducted a survey of consumers in large cities in the Korean market. As a result of this study, it was found that the more O2O app users recognized the influence of SN (subject norms), the more useful O2O app was, the more it led to a change in attitude and usage intention was positively significant. In addition, as the O2O app was easy to use and useful, and the SN was recognized, the user's attitude was positive. On the other hand, it was also found that the transaction cost that consumers have to pay had a negative effect on usage intention. Additionally, VPC and PII have been shown to positively influence on usefulness of O2O apps.

• 한국세라믹학회지
• /
• 제27권3호
• /
• pp.361-368
• /
• 1990

The properties of the powder of ZrO2＋3m/o Y2O3 system prepared by co-precipitation method at the pH values of 7, 9, 10 and 11 were investigated. ZrOCl2.8H2O and YCl3.6H2O were used as starting materials and NH4OH as a precipitation agent. Zirconium hydroxide near by Zr(OH)4 structure showed more excellent crystallinity and lower formation temperature of tetragonal ZrO2. In the range of this study, cubic ZrO2 was not formed and stability of tetragonal ZrO2 prepared in the conditiion of pH 7 was most excellent. Average particle sizes and specific surface areas of tetragonal ZrO2 powders, prepared as calcining amorphous zirconium hydroxides at $600^{\circ}C$ for 1h, were 0.6-0.8${\mu}{\textrm}{m}$ and 45-70$m^2$/g, respectively.

• 한국재료학회지
• /
• 제28권10호
• /
• pp.590-594
• /
• 2018

ZnO micro/nanocrystals are formed by a vapor transport method. Mixtures of ZnO and TiO powders are used as the source materials. The TiO powder acts as a reducing agent to reduce the ZnO to Zn and plays an important role in the formation of ZnO micro/nanocrystals. The vapor transport process is carried out in air at atmospheric pressure. When the weight ratios of TiO to ZnO in the source material are lower than 1:2, no ZnO micro/nanocrystals are formed. However, when the ratios of TiO to ZnO in the source material are greater than 1:1, the ZnO crystals with one-dimensional wire morphology are formed. In the room temperature cathodoluminescence spectra of all the products, a strong ultraviolet emission centered at 380 nm is observed. As the ratio of TiO to ZnO in the source material increases from 1:2 to 1:1, the intensity ratio of ultraviolet to visible emission increases, suggesting that the crystallinity of the ZnO crystals is improved. Only the ultraviolet emission is observed for the ZnO crystals prepared using the source material with a TiO/ZnO ratio of 2:1.