• ETRI Journal
• /
• v.29 no.2
• /
• pp.189-200
• /
• 2007

This paper addresses the localization and navigation problem in the movement of service robots by using invisible two dimensional barcodes on the floor. Compared with other methods using natural or artificial landmarks, the proposed localization method has great advantages in cost and appearance since the location of the robot is perfectly known using the barcode information after mapping is finished. We also propose a navigation algorithm which uses a topological structure. For the topological information, we define nodes and edges which are suitable for indoor navigation, especially for large area having multiple rooms, many walls, and many static obstacles. The proposed algorithm also has the advantage that errors which occur in each node are mutually independent and can be compensated exactly after some navigation using barcodes. Simulation and experimental results were performed to verify the algorithm in the barcode environment, showing excellent performance results. After mapping, it is also possible to solve the kidnapped robot problem and to generate paths using topological information.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.6
• /
• pp.571-576
• /
• 2015

This paper proposes an auto-parking controller for omnidirectional mobile robots. The controller uses the multi-sensor system including ultrasonic sensor and camera. The several ultrasonic sensors of robot detect the distance between robot and each wall of the parking lot. The camera detects the global position of robot by capturing the image of artificial landmarks. To improve the accuracy of position estimation, we applied the extended Kalman filter with adaptive fuzzy controller. Also we developed the fuzzy control system to reduce the settling time of parking. The experimental results are presented to verify the usefulness of the proposed controller.

• The Journal of Korea Robotics Society
• /
• v.4 no.4
• /
• pp.312-319
• /
• 2009

This paper proposes a low-complexity indoor localization method of mobile robot under the dynamic environment by fusing the landmark image information from an ordinary camera and the distance information from sensor nodes in an indoor environment, which is based on sensor network. Basically, the sensor network provides an effective method for the mobile robot to adapt to environmental changes and guides it across a geographical network area. To enhance the performance of localization, we used an ordinary CCD camera and the artificial landmarks, which are devised for self-localization. Experimental results show that the real-time localization of mobile robot can be achieved with robustness and accurateness using the proposed localization method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.4
• /
• pp.353-364
• /
• 2009

In this paper, a SLAM (Simultaneous Localization and Mapping) method using a single camera and planar fiducial markers is proposed. Fiducial markers are planar patterns that are mounted on the ceiling or wall. Each fiducial marker has a unique hi-tonal identification pattern with square outlines. It can be printed on paper to reduce cost or it can be painted using retro-reflective paint in order to make invisible and prevent undesirable visual effects. Existing localization methods using artificial landmarks have the disadvantage that landmark locations must be known a priori. In contrast, the proposed method can build a map and estimate robot location even if landmark locations are not known a priori. Hence, it reduces installation time and setup cost. The proposed method works good even when only one fiducial marker is seen at a scene. We perform computer simulation to evaluate proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.868-875
• /
• 2006

The localization is one of the most important issues for mobile robot. This paper describes a novel localization system for the development of a location sensing network. The system comprises wirelessly controlled infrared landmarks and an image sensor which detects the pixel positions of infrared sources. The proposed localization system can operate irrespective of the illumination condition in the indoor environment. We describe the operating principles of the developed localization system and report the performance for mobile robot localization and navigation. The advantage of the developed system lies in its robustness and low cost to obtain location information as well as simplicity of deployment to build a robot location sensing network. Experimental results show that the developed system outperforms the state-of-the-art localization methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.3
• /
• pp.147-156
• /
• 2024

This paper introduces the design of a turtle neck posture correction and prevention system for users of digital devices for a long time. The number of forward head posture patients in Korea increased by 13% from 2018 to 2021, and has not yet improved according to the latest statistics at the present time. Because of the nature of the disease, prevention is more important than treatment. Therefore, in this paper, we designed a system based on built-camera in most laptops to increase the accessiblility of the system, and utilize the features such as Pose Estimation, Face Landmarks Detection, Iris Tracking, and Depth Estimation of Google Mediapipe to prevent the need to produce artificial intelligence models and allow users to easily prevent forward head posture.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2042-2047
• /
• 2005

Many service robots which is interacting with human at home and in buildings have been developed. Few of them are shown in of the United States and of Japan. These robots are supposed to have a powerful indoor navigation performance in places where human beings live and work. The overall capability of service robots to move around in this environment is called environment correspondence, in which localization problem to find the accurate position and orientation is the most critical problem. While users set up a proper or a best environment for industrial robots, but for services robots at home and in buildings, it is very difficult to change the environment for robots. The expanded workspace due to mobility is difficult to be covered by means of those used for industrial robots because the cost increases and human beings do not want their environment to be changed for robots. This fact has made many researchers study efficient and effective environment correspondence problems. Among these problems, localization is the most difficult. Goal of localization study includes (1) Accurate detection of position and orientation (2) Minimum cost of the additional devices (3) Minimum change of human environment. In this study, as a solution of the above, we propose "Artificial Stars" which are attached on room ceiling as landmarks. In addition, we solve an adoption problem raised when a robot is delivered to a customer site and before it can perform its full navigation capability. We call this as "Initialization Problem" of service robots. We solve the initialization problem for both cases of environment with the map and without map. The proposed system is experimented and has shown how well it handles the initialization problem.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.3
• /
• pp.197-203
• /
• 2007

Statement of problem: It is very important to establish the suitable position for artificial maxillary anterior teeth and the orientation of occlusal plane in fabrication of the complete dentures. Incisive papilla has been considered the most useful anatomic landmark in the arranging of a maxillary anterior artificial teeth. Purpose: To determine correct position of upper anterior artificial teeth in complete denture patients, relationship of incisive papilla, intercanine line, occlusal plane were evaluated in Korean adults. Materials and Method: Maxillary casts were made in 60 Korean dentate subjects. Each cast was mounted in Hanau modular articulator using Hanau spring bow. Then, anatomic landmarks were determined in each cast. Distance from central incisor to incisive papilla, distance from incisive papilla to intercanine line and discrepancies between frankfurt plane and occlusal plane were measured and analysed. Results: 1. The mean distance between the posterior point of incisive papilla and the incisal edge of central incisor was 11.20 mm (in male 11.77 mm, in female 10.55 mm) and there was no significant difference in measured values between male and female 2. The mean distance between the posterior point of incisive papilla and intercanine line was 2.52 mm (Male 2.57 mm, Female 2.35 mm) and there were no significant differencies in measured values between male and female 3. The mean discripancy between the Frankfurt plane and the occlusal plane were 9. 75 degree (Male 9.81 degree, Female 9.55 degree), and there was no significant difference in measured values between left and right sides.

• The Korean Journal of Applied Statistics
• /
• v.37 no.1
• /
• pp.73-86
• /
• 2024

A radial chart of Excel is very useful graphical method in delivering information for numerical data. However, it is not easy to discriminate or classify many individuals. In this case, after shaping each individual of a radial chart, we need to apply shape analysis. For a radial chart, since landmarks for shaping are formed as many as the number of variables representing the characteristics of the object, we consider a shape that connects them to a line. If the shape becomes complicated due to the large number of variables, it is difficult to easily grasp even if visualized using a radial chart. Principal component analysis (PCA) is performed on variables to create a visually effective shape. The classification table and classification rate are checked by applying the techniques of traditional discriminant analysis, support vector machine (SVM), and artificial neural network (ANN), before and after principal component analysis. In addition, the difference in discrimination between the two coordinates of generalized procrustes analysis (GPA) coordinates and Bookstein coordinates is compared. Bookstein coordinates are obtained by converting the position, rotation, and scale of the shape around the base landmarks, and show higher rate than GPA coordinates for the classification rate.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2033-2038
• /
• 2003

This paper describes an integrated navigation strategy for the autonomous service robot PSR. The PSR is under development at the KIST for service tasks in indoor public environments. The PSR is a multi-functional mobile-manipulator typed agent, which works in daily life. Major advantages of proposed navigation are as follows: 1) Structured control architecture for a systematic integration of various software modules. A Petri net based configuration design enables stable control flow of a robot. 2) A range sensor based generalized scheme of navigation. Any range sensor can be selectively applied using the proposed navigation scheme. 3) No need for modification of environments. (No use of artificial landmarks.) 4) Hybrid approaches combining reactive behavior as well as deliberative planner, and local grid maps as well as global topological maps. A presented experimental result shows that the proposed navigation scheme is useful for mobile service robot in practical applications.