• 제목/요약/키워드: Artificial Degraded Material

검색결과 16건 처리시간 0.021초

Salt fog 시험법에 의한 실리콘 고무의 표면 열화 및 발수성 회복 특성 (Surface aging and hydrophobicity recovery of silicone rubber by salt fog method)

  • 김정호;서광석;문중섭;송우창;이재형;박용관;양계준;유영식
    • 한국전기전자재료학회논문지
    • /
    • 제13권7호
    • /
    • pp.636-641
    • /
    • 2000
  • The purpose of this study is assessing the characteristics of surface aging and recovery of hydrophobicity for silicone rubber which takes a great interest as outdoor insulation recently subjected to the combined stressed of salt fog and AC power. The methods for assessing are contact angle ATR-FRIR, AFM and XRD. In addition salt fog method is adopted as the artificial contamination experiment and AC power is applied 24 hour on and 24 hour off repeatedly for 5 cycles. The results suggest that degraded surface was more rough than virgin but was restored water repellency through the off cycle. It was due to not only the formation of fractal surface but also maintenance of hydrophobic surface by diffusion of low molecular oil. Although surface recovers initial hydropohbicity there are possibilities of decreasing electrical performance due to irreversable changes such as depolymerization of surface and loss of filler particles. This fact is confirmed by surface conductivity measurement showing that the degradation is significant and the recovery of hydrophobicity is imperfect as the energized cycle increases.

  • PDF

고온 플랜트용 내열 합금강 가속열화 기구의 현장 사용재 비교 검증 (Comparative Verification of Accelerated Degradation Mechanism of Heat-Resistant Steel for High Temperature Plant with that Used in the Field)

  • 이승미;김재연;변재원
    • 한국신뢰성학회지:신뢰성응용연구
    • /
    • 제15권4호
    • /
    • pp.262-269
    • /
    • 2015
  • Accelerated degradation mechanism of the heat-resistant steel for high temperature plant was analysed in terms of microstructure and hardness. In order to simulate the microstructure of the steel actually used at $540^{\circ}C$ in the field, isothermal exposure was carried out at $630^{\circ}C$ up to 4,800 hours. The artificial degradation mechanism was comparatively verified to successfully simulate degradation of the long-time used field material. For the artificially degraded specimens, databases including size and aspect ratio of carbide, chemical composition (i.e., Cr/Mo ratio) of grain boundary carbide were built up. These degradation parameters were suggested as fingerprints for PHM (i.e., prognostics health management) of power plants.

Stochastic Estimation of Acoustic Impedance of Glass-Reinforced Epoxy Coating

  • Kim, Nohyu;Nah, Hwan-Seon
    • 비파괴검사학회지
    • /
    • 제34권2호
    • /
    • pp.119-127
    • /
    • 2014
  • An epoxy coating applied to the concrete surface of a containment building deteriorates in hazardous environments such as those containing radiation, heat, and moisture. Unlike metals, the epoxy coating on a concrete liner absorbs and discharges moisture during the degradations process, so it has a different density and volume during service. In this study, acoustic impedance was adopted for characterizing the degradation of a glass-reinforced epoxy coating using the acoustic reflection coefficient (reflectance) on a rough epoxy coating. For estimating the acoustic reflectance on a wavy epoxy coating surface, a probabilistic model was developed to represent the multiple irregular reflections of the acoustic wave from the wavy surface on the basis of the simulated annealing technique. A number of epoxy-coated concrete specimens were prepared and exposed to accelerated aging conditions to induce an artificial aging degradation in them. The acoustic impedance of the degraded epoxy coating was estimated successfully by minimizing the error between a waveform calculated from the mathematical model and a waveform measured from the surface of the rough coating.

2.25Cr-1Mo 강의 열화도 평가를 위한 비선형 음향효과 응용법 (Application of Non-linear Acoustic Effect for Evaluation of Degradation of 2.25Cr-1Mo Steel)

  • 최윤호;장경영;박익근;김현묵
    • 비파괴검사학회지
    • /
    • 제22권2호
    • /
    • pp.170-176
    • /
    • 2002
  • 재료 내부를 초음파가 전파하면서 발생되는 비선형 음향효과는 재료의 열화도를 비파괴적으로 평가하는데 우수한 것으로 보고되고 있다. 비선형 음향효과는 재질의 특성에 따라 나타나는 정도가 다르며, 이러한 정도는 비선형 파라미터를 이용하여 정량적으로 평가하는 것이 가능하다. 본 연구에서는 2.25Cr-1Mo 강이 $540^{\circ}C$에서 장시간 노출되었을 때 얼어나는 미세조직의 변화를 얻기 위해 인공 열처리를 수행하고, 2.25Cr-1Mo 강의 열화도와 비선형 음향효과와의 관계를 실험적으로 검증하여 경년 열화도와 비선형 파라미터의 상관관계를 규명하고자 하였다. 비선형 파라미터는 바이스펙트럼법과 파워스펙트럼법을 이용하여 측정되었으며, 실험결과 바이스펙트럼법에 의한 비선형 파라미터는 열화 시간에 매우 민감하게 반응하는 것으로 나타났다.

전기로 슬래그를 활용한 인공리프용 친환경콘크리트의 공학적 성능 및 적용성 (Engineering Performance and Applicability of Eco-Friendly Concrete for Artificial Reefs Using Electric Arc Furnace Slags)

  • 조영진;최세휴
    • 대한토목학회논문집
    • /
    • 제35권3호
    • /
    • pp.533-544
    • /
    • 2015
  • 해양환경에 노출된 콘크리트는 육상에서 건설되는 콘크리트와 달리 해풍, 조력, 파도, 파랑 등에 의한 물리적 작용과 해수의 $SO_4{^{2-}}$, $Cl^-$$Mg^{2+}$ 이온 등에 의한 화학적 침식작용 및 동결융해 등 가혹한 환경에 노출되어 콘크리트의 내구성을 크게 저하시킨다. 해중 콘크리트의 대규모 시공은 콘크리트의 강도손실은 물론 알칼리(pH) 및 중금속 등 환경유해물질이 용출될 수 있어 이에 대한 충분한 검토와 연구가 필요한 실정이다. 본 연구에서는 전기로 환원슬래그로부터 CSA 자극제를 개발하고 전기로 산화슬래그를 콘크리트용 골재로 활용하여 인공리프용 친환경콘크리트를 개발하였다. 초기강도는 Normal concrete보다 낮게 나타나 친환경콘크리트의 초기강도 품질향상을 위한 추가적인 연구가 필요하였으며, 친환경콘크리트의 해수저항성은 양생일 1년 대비 평균 강도손실이 8~9% 발생하였다. 고함량 고로슬래그 미분말과 고비중 전기로 산화슬래그 골재를 사용한 친환경콘크리트를 동결융해저항성 재료로써 충분히 활용할 수 있는 가능성을 확인하였다. 친환경콘크리트의 중금속 용출특성은 콘크리트의 수화반응을 통한 경화과정에서 중금속 성분은 화학적 결합을 통해 고정화되기 때문에 환경유해성 기준 이하이거나 검출되지 않아 유해물질 용출에 안전하다는 것을 확인하였다.

골내낭에 매식된 수종의 생체요법재료에 대한 조직학적 연구 (Histologic Study Of Different Bioceramic Implants In Intrabony Defects)

  • 이철우;최상묵;한수부;박상현;김현종
    • Journal of Periodontal and Implant Science
    • /
    • 제26권1호
    • /
    • pp.27-46
    • /
    • 1996
  • The purpose of this study was designed to compare with the effects of 4 different surface active bioceramics on the healing process of alveolar bone defects in dogs. Artificial alveolar bone defects depth 4-6mm, width 3-4mm) were created with # 6 round bur at interproximal areas of maxillary canine, maxillary 2nd premolar, mandibular canine, and mandibular 3rd premolar. porous hydroxyapatite(Interpore $200^R$) , 45S5 bioglass, CJ4/lOC crystalline glass, and JJ crystalline glass were implanted in intrabony defects randomly. Experimental groups were divided into 4 categories according to its implant material. After implantation, all groups were examined postoperatively 4 weeks to 12 weeks. 3 dogs was selected randomly and sacrificed after vascular perfusion with 2.5% glutaraldehyde at every 4 weeks. Tissue blocks with surroundig alveolar bone and soft tissues were removed and immersed in formaldehyde/glutaraldehyde fixative. After 20 weeks decalcification with EDTA and formic acid, sections were made and observed under light microscope and transmission electron microscope. In all experimental groups, the encapsulation of inactive connective tissue was observed around graft particles in 4 weeks. As time elapsed, the thickness of surrounding connective tissue was decreased. Osteoconductive bone growth pattern was seen apparently in all groups. CJ4/lOC crystalline glass showed the most active bone formation until 8 weeks. 45S5 bioglass was, however, the most active in new bone formation at 12 weeks. Though there was difference in resorption rate among grafting materials, the size of graft particles was decreased gradually. 45S5 bioglass was resorbed faster than the others. On the other hand, porous hydroxyapatite was degraded most slowly. Phagocytosed particulate matters was observed in the cytoplasm of multinuclear multinuclear giant cell and macrophage under transmission electron microscope. The results suggested suggested that 45S5 bioglass and CJ4/lOC crystalline glass may have some enhanced reparative potential when compared to porous hydroxapatite in the treatment of periodontal defeds. JJ crystalline glass reguires a further investigation of the safety of its use.

  • PDF