• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.121-128
• /
• 2012

The optimization of cooling system parameters for designing injection mold is very important to acquire the highest part quality. In this paper, the integration of computer simulations of injection molding and Analysis of Variance(ANOVA) with orthogonal array was used as a design tool to optimize the cooling system parameters aimed at minimizing the part warpage. The design optimizer was applied to find the optimum levels of cooling system parameters for a dustpan. This optimization resulted in more uniform temperature distribution over the part and significant reduction of a part warpage, showing the capability of present method as an effective design tool. The whole optimization process was performed systematically in a proper number of cooling simulations. The design optimizer can be utilized effectively in the industry practice for designing mold cooling system with less cost and time.

• 정보저장시스템학회논문집
• /
• 제2권4호
• /
• pp.236-239
• /
• 2006

Glass micro molding process is the most suitable process for fabricating high precision glass microlens amy at low cost. A new glass micro molding process was proposed. Tungsten carbide mold was fabricated by imprinting and sintering process to overcome the difficulties of the conventional process. In the glass micro molding process, process conditions such as processing temperature and compression force were changed. Geometrical properties of the replicated glass microlens array were measured and compared at variety process conditions. The condition of glass micro molding process was optimized. The experimental result showed that developed process was effective to produce a glass microlens array.

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3084-3092
• /
• 2010

This paper describes the development of an automated, hand-held sensor for the fast assessment of seafood freshness. The sensor developed here combined: an array-based chemical sensor, composed of incrementally different conducting polymer elements deposited on a small chip; a highly sensitive, custom-made electronics for the detection of very small signal changes; precise temperature control of the sensor chamber; and an on-board microcontroller for data collection, storage, automation, and analysis. The instrument was used to successfully test seafood samples with different degree of freshness and spoilage. A linear relationship between microbiological count and e-Nose signal for three different fish fillet was developed. Once the linear relationship is included into the hand-held unit software, the e-Nose signal can be used for assessment of seafood freshness without performing the microbiological count technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.328-330
• /
• 2001

The construct of photovoltaic module array, main power source of photovoltaic system, is very important to the efficiency improvement of whole photovoltaic system. Photovoltaic modules are usually connected in series or parallel to meet power capacity required. Since output characteristics of a photovoltaic module are greatly fluctuated on the variation of insolation, temperature and its type, the maximum open circuit voltage and output operating voltage of photovoltaic module array must exist in the admissible input voltage range of inverter system under any operating conditions. In this paper, we present the selection and array method of photovoltaic modules through simulation for the coupling loss reduction between photovoltaic modules and a inverter.

• 한국안전학회지
• /
• 제23권6호
• /
• pp.1-6
• /
• 2008

Machine operator and quality are affected by chip during cutting process to product machine parts. This paper presents a study of the influence of cutting conditions on the surface roughness obtained by turning using Taguchi method for safety of turning operator. In the machining of titanium alloy, high cutting temperature and strong chemical affinity between the tool and the work material are generated because of its low thermal conductivity and chemical reactivity. Therefore titanium alloys are known as difficult-to materials. An orthogonal array, the signal-to-noise ratio, the analysis of variance are employed to investigate the cutting characteristics of implant material bars using tungsten carbide cutting tools of throwaway type. Also Experimental results by orthogonal array are compared with optimal condition to evaluate advanced reliability. Required simulations and experiments are performed, and the results are investigated.

• 전력전자학회논문지
• /
• 제25권2호
• /
• pp.111-117
• /
• 2020

The photovoltaic module has the characteristic that the output power varies according to the amount of insolation. If partial shading occurs in an environment composed of an array, a number of local maximum power points (LMPPs) may be generated according to the shading state. Photovoltaic arrays require global maximum power point tracking due to variations in output characteristics caused by solar radiation and temperature. Conventional algorithms, such as P&O and Incond, do not follow the global maximum power point in a partial shaded solar array. In this study, we propose a technique to follow the global maximum power point by using the correlation of voltage, current, and power in solar arrays. The proposed control technique 2qw validated through simulation and experiments by constructing a 2-kW solar system.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.937-939
• /
• 2016

본 논문에서는 배열형 센서로 제작된 광섬유 브래그 격자(FBG)의 감마방사선 영향을 분석하였다. 배열형 FBG는 동일한 상용 광섬유를 이용하여 서로다른 브래그 파장으로 제작되었다. 제작된 FBG는 $Co^{60}$ 감마선원을 이용하여 약 113 Gy/min의 선량률로 총선량 약 100 kGy 감마선에 노출되었으며 방사선 조사 후 FBG 센서의 브래그 파장 변화, 온도감도 변화를 측정하여 방사선 영향을 분석하였다.

• 한국광학회지
• /
• 제30권6호
• /
• pp.226-229
• /
• 2019

96-채널 50-GHz 배열형 도파로격자를 사용하여 광섬유 브래그 격자의 브래그 파장 측정 시스템을 제작하였다. 충분히 넓은 대역폭을 갖는 광섬유격자의 브래그 파장은 변형 또는 온도의 변화에 따라 선형적으로 변화하는 것을 확인하였다. 제작된 파장 측정 시스템은 0.01 nm의 해상도를 가지며 10초 간격으로 브래그 파장을 측정한다. 12개의 직렬 연결된 아크릴레이트 재코팅된 다채널 광섬유격자들의 파장 이동을 동시에 측정하였고, 광섬유격자의 온도가 -25℃에서 85℃로 변화될 때, 파장 감도는 0.018 nm/℃에서 0.01 nm/℃까지 변화하였다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 학술대회 논문집
• /
• pp.255-258
• /
• 2004

The SAR(Solar Array Regulator) of KOMPSAT(Korea Multi Purpose SATellite)-1, 2 regulates a photovoltaic power according to the duty ratio commands of the ECU. But the ECU has so many other jobs that it can not calculate the solar array condition immediately. It means the SAR cannot always generate the maximum power of a photovoltaic. Nowadays, the commercial photovoltaic systems are using a controller operated by digital processing. But the usage for satellite is not adaptable. It is not easy to find the processor of the space grade and the price is expensive. So in this paper, the simple analog MPPT(Maximum Power Point Tracking) algorithm is proposed for the small satellite in LEO. This algorithm does not need any calculation of power by multiplication of voltage and current md a measurement of the solar array temperature. It is consist of only two sample and hold circuits, two comparators, a flip-flop, and an integrator. The proposed MPPT algorithm is verified by the simulation and experimental.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.26-32
• /
• 2005

본 논문에서는 위성체 태양전지의 진동응답을 분석하였다. 태양전지는 복합재료 얇은 벽보와 태양전지 판 및 보조 바로 구성되어 있다. 복합재료 얇은 벽보는 전단 변형, 12차 와핑, 회전 관성과 재료의 방향성 등을 고려해야 한다. 태양전지 판은 z 방향으로 일정한 장력이 가해지는 얇은 막이며 보조 바는 강체 구조물이다. 열적 구배에 따른 구조 변형에 의한 영향을 고려하여 연성된 열적 구조 해석을 수행하였으며, 열적 불안정성 조건이 되는 안정성 기준 인자들을 분석하였다.