• 한국정보통신학회논문지
• /
• 제22권4호
• /
• pp.683-690
• /
• 2018

본 논문에서는 배열 안테나 기반의 MVDR (minimum variance distortionless response) 항 재밍 GPS (global positioning system) 수신기에서 안테나 경로 사이에 존재하는 이득, 위상, 지연 편차를 교정하기 위한 안테나 교정 기법을 제안한다. 제안하는 기법은 다중 안테나 시스템에서 안테나 경로들 사이의 이득, 위상, 지연 편차를 추정하고 이를 보상한다. 경로 간 이득, 위상, 지연 편차를 정확히 추정하기 위해 좋은 상관 특성을 갖는 파일럿 신호가 사용된다. 교차 상관에 기반하여 지연 편차가 먼저 추정되며 이후에 이득과 위상 편차가 추정된다. 정밀한 지연 편차 추정 및 보상을 위해 보간기법을 사용하는데 이산 푸리에 변환 (DFT) 기반의 보간기법으로 계산 복잡도를 감소시킨다. 제안된 기법은 MATLAB을 이용한 컴퓨터 모의실험을 통해 검증한다. 모의실험 결과에 따르면 제안하는 기법을 적용하면 이득, 위상 시간 지연 편차를 각각 0.01 dB, 0.05 도, 0.5 ns 이내로 줄일 수 있다.

• 센서학회지
• /
• 제33권1호
• /
• pp.56-61
• /
• 2024

The quality of the display can be managed by effectively managing the temperature generated by the panel during use. Conventional display panels rely on an external reference resistor for temperature monitoring. However, this approach is easily affected by external factors such as temperature variations from the driving circuit and chips. These variations reduce reliability, causing complicated mounting owing to the external chip, and cannot monitor the individual pixel temperatures. However, this issue can be simply and efficiently addressed by integrating temperature sensors during the display panel manufacturing process. In this study, we fabricated and analyzed a temperature sensor integrated into an a-IGZO (amorphous indium-gallium-zinc-oxide) TFT array that was to precisely monitor temperature and prevent the deterioration of OLED display pixels. The temperature sensor was positioned on top of the oxide TFT. Simultaneously, it worked as a light shield layer, contributing to the reliability of the oxide. The characteristics of the array with integrated temperature sensors were measured and analyzed while adjusting the temperature in real-time. By integrating a temperature sensor into the TFT array, monitoring the temperature of the display became easier and more accurate. This study could contribute to managing the lifetime of the display.

• 한국음향학회지
• /
• 제43권1호
• /
• pp.72-77
• /
• 2024

최근 여러 산업 분야에서 음원 위치 추정의 필요성이 커지고 있다. 기존 음원 위치 추정 방법들 중에서, 음향인텐시티 계측법은 작은 마이크로폰 어레이에서도 높은 정확도를 가지는 장점이 있다. 그러나, 높은 헬름홀츠 수에서의 위치 추정 오차 증가는 이 방법의 한계로 지적되어 왔다. 본 연구에서는 이러한 헬름홀츠 수에 따른 인텐시티 편향 오차를 딥러닝을 통해 보상하는 방법을 제안한다. 제안된 방법은 정사면체 마이크로폰 어레이에서 헬름홀츠 수에 대해 측정된 음향인텐시티 벡터를 입력했을 때, 보상된 음향 인텐시티 벡터를 도출하는 밀집 층 기반의 딥러닝 모델을 적용하여 정확한 음원 위치의 추정을 가능케 한다. 본 연구의 제안 모델은, 0.1 < kd < 3.0의 모든 음원 방향에 대한 시뮬레이션 데이터를 기반으로 검증하였다. 이를 통해, 딥러닝 기반 접근 방식은 음향 인텐시티 벡터 기반의 음원 추정법을 적용하는데 있어서 측정 주파수 범위를 확장하고 다양한 크기를 갖는 마이크로폰 어레이에 적용할 수 있음을 확인하였다.

• 한국음향학회지
• /
• 제18권1호
• /
• pp.25-31
• /
• 1999

본 연구에서는 음향측정 목적의 선형배열에 가우시안 가중치를 적용시킨 광대역 단일 빔형성 알고리듬을 제안한다. 제안 알고리듬은 배열 내의 모든 센서를 동시에 사용하여 1회에 광대역 수신 빔을 형성시킨다. 여기서 주파수 종속 함수의 가우시안 가중치는 각 센서의 수신 주파수 범위를 제어하도록 시간지연 보상 전에 적용된다. 시뮬레이션 결과, 제안 알고리듬에 의해 형성된 광대역 단일빔의 지향지수 및 빔패턴 특성이 광대역 음향신호 측정에 가용함을 확인하였다.

• 한국군사과학기술학회지
• /
• 제5권3호
• /
• pp.98-104
• /
• 2002

An airborne-based Direction-Finding System is developed for the application of ELINT and ES(Electronic Support). The system takes the phase-comparison technology, and has the configuration of multi-based antenna array for the solution of ambiguity due to the increased Direction-Finding resolution. This thesis describes the design of optimized distances among antennas, the electrical characteristics, the method of compensation, the direction-finding accuracy, and et. al. under the condition of the airborne-based environment.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.665-669
• /
• 2000

Recently the problem of energy branch become worse increasingly. Therefore many researches about new energy source are processing in several places around are processing in several places around the world. Especially solar energy has many advantages like as purity and infinity. Photovoltaic(PV) system can be classified into two types : One is stand alone type and the other is utility interactive one. Utility interactive type PV system need some technology that Maximum peak power tracking(MPPT) and Anti-islanding and Active Power filter(APF). For APF operation dc-link voltage should be high to supply sufficient output current which needed for harmonic current compensation so usually DC-DC converter is used for boost. In this paper DC-DC converter for PV system and controller for dc-link voltage control are analyzed and designed.

• 대한기계학회논문집
• /
• 제19권9호
• /
• pp.2194-2205
• /
• 1995

In order to reduce the systematic error of a build-up system, we have proposed a new test procedure in which all force transducers in a build-up system are rotated by 90.deg. with a base platen fixed on a force standard machine. The setting positions of force transducers on the output of a build-up system were investigated using an orthogonal array. The effects of the parallelism of a build-up system and of the bending moment sensitivity of a force transducer were considered. The experimental results show that the setting position of the base platen hardly affects the output of the build-up system, but the setting positions of force transducers affects it strongly. It reveals that the new test procedure reduces effectively the systematic error of a build-up system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1999년도 전력전자학술대회 논문집
• /
• pp.274-277
• /
• 1999

The paper describes a implementation of space vector pulse-width modulation (SVPWM) voltage source inverter using Field Programmable Gate Array(FPGA) for a induction motor control system. The implemented chip is included logic circuits for SVPWM, dead time compensation and speed detection using Quick Logic, QL16X24B. The maximum operating frequency and delay time can be set to 110MHz and 6 nsec. The designed FPGA for SVPWM can be incorporated with a digital signal processing to provide a simple and effective solution for high performance voltage source inverter drives. Simulation and Implementation results are shown to verify the usefulness of FPGA as a Application Specific Integrated Circuit(ASIC) in power electronics applications

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.1000-1003
• /
• 2014

There are 70 vertical and 70 horizontal correctors for Pohang Light Source. Until mid of 2000, power supplies for these correctors were based on 1990's technology, so the global orbit feedback system was not possible with poor 12 bit resolution. A new task force team was assembled to develop new power supplies with BESSY type DAC cards. After the project, two vertical correctors in each lattice were connected with new power supplies, and the global orbit feedback was available within the accuracy of 5 microns. However, this replacement was not enough to satisfy the beam stability requirement of 2 microns for PLS. We have launched another power supply design based on all digital technology. This attempt was completed within a year, and 80 units were assembled in house. Currently, the global orbit feedback system is running successfully with new digital power supplies and the compensation of chamber motion due to the thermal load by using digital displacement transducers attached on each BPMs.

• 한국기계가공학회지
• /
• 제12권1호
• /
• pp.117-125
• /
• 2013

Variations of springback in stamped parts are induced by the uncontrollable noises including the variation of incoming material properties, lubrication and other forming process parameters. Reduction of springback variation is very important during springback compensation processes on stamping dies and assembly processes. To reduce the variation of springback, a robust optimization methodology which uses complex method combined with orthogonal array is proposed. The proposed method is applied to the robust design of U-channel die for the reduction of side wall curl. It is shown that the drawbead and die radius of U-channel draw die can be effectively optimized by the proposed method.