Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지

Robust design of springback in U-channel forming using complex method

콤플렉스법을 이용한 U-채널 성형의 스프링백 강건 설계

  • Yin, Jeong-Je (Department of Mechanical Engineering Design, Induk University) ;
  • Kim, Kyung-Mo (School of Industrial Engineering, Kumoh National Institute of Technology) ;
  • Park, Jong-Cheon (Department of Mechanical Engineering, Kumoh National Institute of Technology)
  • Published : 2013.02.28
⟨ Previous Next ⟩

Abstract

Variations of springback in stamped parts are induced by the uncontrollable noises including the variation of incoming material properties, lubrication and other forming process parameters. Reduction of springback variation is very important during springback compensation processes on stamping dies and assembly processes. To reduce the variation of springback, a robust optimization methodology which uses complex method combined with orthogonal array is proposed. The proposed method is applied to the robust design of U-channel die for the reduction of side wall curl. It is shown that the drawbead and die radius of U-channel draw die can be effectively optimized by the proposed method.

Keywords

References

  1. Buranathiti, T., Cao, J., Xia, Z. C,. and Chen, W., "Probabilistic Design in a Sheet Metal Stamping Process under Failure Analysis," Numisheet 2005, pp. 867-872, 2005.
  2. Zhang, W., and Shivpuri, R., "Probabilistic design of aluminum sheet drawing for reduced risk of wrinkling and fracture," Reliability Engineering and System Safety, Vol. 94, pp. 152-161, 2009. https://doi.org/10.1016/j.ress.2008.02.024
  3. Müllerschön, H., Roux, W., Lorenz, D., and Roll, K., "Stochastic Analysis of Uncertainties for Metal Forming Processes with LS-OPT," Numisheet 2008, pp. 819-828, 2008.
  4. Donglai, W., Zhenshan, C., and Jun, C., "Optimization and tolerance prediction of sheet metal forming process using response surface model," Computational Materials Science, Vol. 42, pp. 228-223, 2008. https://doi.org/10.1016/j.commatsci.2007.07.014
  5. Yanmin Xie, "Robust design of Sheet Metal Forming Process Based on Kriging Metamodel," Numisheet 2011, pp. 927-934, 2011.
  6. Chen, P. and Koc, M., "Simulation of springback variation in forming of advanced high strength steels," Journal of Material Processing Technology, 190, pp. 189-198, 2007. https://doi.org/10.1016/j.jmatprotec.2007.02.046
  7. Strano, M., "Robustness Evaluation and Tolerance Prediction for a Stamping Process with Springback Calculation by the FEM," Numisheet 2005, pp. 266-271, 2005.
  8. Kim, K., Yin, J.J., and Suh, Y.S., "Process optimization of Sheet Metal Forming Using Operating Window," Proceedings of the ASME IDETC/CIE 2009, San Diego, California, 2009.
  9. Taguchi, G., Konish, "Taguchi method, orthogonal arrays and linear graphs," Tools for Quality Engineering, American Supplier Institute, pp. 35-38, 1987.
  10. Reklatis, G. V., Ravindran, A., and Ragsdell, K.M., Engineering Optimization Methods and Applications, John Wiley&sons Inc., New York, pp. 268-277, 1983.
  11. Park, J. C., Kim, K. B. and Kim, K. M., "Robust Design for Multiple Quality Attributes in Injection Molded Parts by the TOPSIS and Complex Method," Journal of the Korean Society of Precision Engineering Vol. 18, No. 12, pp. 116-123, 2001.
  12. Green, D. E., "Description of Numisheet 2005 Benchmark #3 Stage-1:Channel Draw with 75% drawbead penetration," Numisheet 2005, pp. 894-904, 2005.
  13. Stoughton, T. B., Green, D. and Iadicola, M., "Specification For BM3: Two-Stage Channel/Cup Draw," Numisheet 2005, pp. 1157-1172, 2005.
  14. Iadicola, M. A., Foeckeand, T., Stoughton, T. B., "Experimental Procedures and Results for Benchmark 3: Stage 2 Forming Process," Numisheet 2005, pp. 905-915, 2005.