• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.98.4-98
• /
• 1998

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2408-2413
• /
• 2007

Since the heat generation in a chip increases as the components are miniaturized and the computing speed becomes faster, suitable heat dissipation has become one of the primary limiting factors to ensure the reliable operation of the electronic devices. A pin-fin array could be used as an alterative cooling system of the electronic equipment. In this study, convective heat transfer through the pin-fin array is analyzed experimentally based on porous medium approach. The influence of the structure of the pin-fin array including the pin-fin spacing, the pin diameter and plate length on heat transfer characteristics is investigated and compared with the previous analytical results and existing correlation equations. Nowadays, electronic and mechanical devices become smaller and smaller. In this sense, the main purpose of this study is to decide the optimum pin-fin arrangement to get similar heat transfer performance when the length of the existing cooling system is reduced as a half.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.39-46
• /
• 2008

Asymmetric glass lens core for portable projection optic system was designed and simulated. And it was machined by newly developed non-rotational ultra precision grinding method. With the designed lens data which optimized for multi-collimation, we generated the we core surface data. Mold pressing conditions analyzed by FEM. In the machining process, ground profile errors were compensated based on measured data, minimized feed rate and depth of cut. The deviations of machined core profile were acceptable level for glass mold press. Mold pressed glass array lens was coated with $SiO_2\;and\;Ta_2O_5$ for anti-reflection.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.5
• /
• pp.418-425
• /
• 2007

The power consumption and heat generation in a chip increase as the components are miniaturized and the computing speed becomes faster. Therefore, suitable heat dissipation has become one of the primary limiting factors to ensure the guaranteed performance and reliable operation of the electronic devices. A pin-fin array which may be considered as a porous medium could be used as an alterative cooling system of the electronic equipment. The aim of the present study is to investigate the forced-convective heat transfer characteristics of pin-fin heat exchangers. Convective heat transfer through the pin~fin array is analyzed experimentally based on porous medium approach. The influence of the structure of the pin-fin array including the pin-fin spacing, the pin diameter and plate length on heat transfer characteristic is investigated and compared with the Previous analytical results and existing correlation equations. Nowadays, electronic and mechanical devices become smaller and smaller. In this sense, the main purpose of this study is to decide the optimum pin-fin arrangement to get similar heat transfer performance when the length of the existing cooling system is reduced as a half.

• Current Optics and Photonics
• /
• v.7 no.5
• /
• pp.485-495
• /
• 2023

The pixel size in high-resolution complementary metal-oxide-semiconductor (CMOS) image sensors continues to shrink due to chip size limitations. However, the pixel pitch's miniaturization causes deterioration of optical performance. As one solution, a quad color filter (CF) array with pixel binning has been developed to enhance sensitivity. For high sensitivity, the microlens structure also needs to be optimized as the CF arrays change. In this paper, the covered microlens, which consist of four microlenses covered by one large microlens, are proposed for the quad CF array in the backside illumination pixel structure. To evaluate the optical performance, the suggested microlens structure was simulated from 0.5 ㎛ to 1.0 ㎛ pixels at the center and edge of the sensors. Moreover, all pixel structures were compared with and without in-pixel deep trench isolation (DTI), which works to distribute incident light uniformly into each photodiode. The suggested structure was evaluated with an optical simulation using the finite-difference time-domain method for numerical analysis of the optical characteristics. Compared to the conventional microlens, the suggested microlens show 29.1% and 33.9% maximum enhancement of sensitivity at the center and edge of the sensor, respectively. Therefore, the covered microlens demonstrated the highly sensitive image sensor with a quad CF array.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.5
• /
• pp.572-579
• /
• 1988

In this paper, a system of automatic placement and routing for gate array layout design is proposed. In the placement stage, the circuit is partitioned and using the concept of min-cut slicing, and each partitioned module is placed, so that the routing density over the entire chip be uniformized and the total wiring length be minimized. In the global routing stage, the concept of the probabilistic routing density is introduced to unify the wiring congestions in each channel. In the detailed routing stage, the multi-terminal nets are partitioned into the two-terminal nets. The ordered channel graph is proposed which implies the vertical and the horizontal constranint graphs simultaneously. And using the ordered channel graph, the proposed routing algorithm assigns the signal nets to the tracks. Also the proposed placement and routing algorithms are implimented on IBM/PC-AT to construct PC-level gate array layout system.

• The Korean Journal of Applied Statistics
• /
• v.23 no.1
• /
• pp.179-187
• /
• 2010

Miniature spectrometers can be applied for various purposes in wide areas. This paper shows how a wellmade spectrometer on-a-chip of a low performance and low-cost filter-array can be used for recognizing types of red wine. Light spectra are processed through a filter-array of a spectrometer after they have passed through the wine in the cuvettes. Without recovering the original target spectrum, pattern recognition methods are introduced to detect the types of wine. A wavelength cross-correlation turns out to be a good distance metric among spectra because it captures their simultaneous movements and it is affine invariant. Consequently, a well-designed spectrometer is reliability in terms of its repeatability.

• Proceedings of the KIEE Conference
• /
• 2003.10a
• /
• pp.303-305
• /
• 2003

In this paper, we have been proposed a new method of multichannel biosensor using random fluidic self-assembly. A metal particle and an array was fabricated. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.85-93
• /
• 1984

In the paper, a new constructive initial placement algorithm is proposed in computer aided layout design in LSI. An useful object function are proposed to place the modules in logic design diagram laid down by manual to the fixed chip, reflecting the relative positions between modules and cells, and then an initial placement are determined by the function. In order to show the usefulness of the proposed method, it was compared with clustering development method in maximum cut numbers and total routing lengths by program experiments.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.209.2-209.2
• /
• 2014

In recent years, researches about hydrophobic and hydrophilic surfaces have been executed however their other effects have not been researched enough. In this paper, the fabrication method of hierarchical structures of micro line array combined with fluorinated wax for anisotropic superomniphobic wettability is presented. We have achieved anisotropic and superomniphobic surface via simple two step methods, which are maskless photolithography and wax deposition. In order to prove how to provide those characteristics, SEM, contact angle measurement tool and X-ray diffraction are used. Fluorinated wax is crystalized self-assembly and it is subordinated on micro line array so that it is able to display anisotropic wettability. Understanding on anisotropic superomniphobic surface and simple fabrication method has been attracted to apply for lots of applications which range from self-cleaning surface, microfluidic chip, to directionally fluid control device, even in oily fluid.