• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.1007-1019
• /
• 2006

In this paper, the synthesis method of multibeam radiation pattern with multi-directional beams and nulls is proposed. Genetic algorithm is applied for the optimization of amplitude and phase of the feeding signal into each element that is structured in planar array of single patch antenna with an arbitrary field distribution. To verify the validity of the proposed method, $2{\times}2$ planar array antenna is used for the measurement and the measured far field radiation pattern is compared with the simulation result. As a result, the synthesis of multibeam radiation pattern is implemented by the optimization of amplitude and phase of the feeding signal into each element of $8{\times}8$ planar array antenna system.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.5
• /
• pp.370-375
• /
• 2004

This paper proposes an algorithm that estimates three dimensional array shape calibration about the bottom-mounted sensor array. under the assumption that the active sources are in the far-field with unknown positions. Under some assumptions. we calculate the sensor positions via an algebraic solutions of a least squares problem that the linear equations are related to the sensor positions and directions or arrival. We give examples of algorithm performance from both computer simulations and sea test. We also illustrate the performance of sensor positions estimation as a function of time delay estimation variance and the distribution of the localizing sources.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.666-674
• /
• 2016

In this paper, a high efficiency satellite electrical power supply system is proposed. The increased efficiency of the power supply system allows for downscaling of the solar array and battery weight, which are among the most important satellite design considerations. The satellite power supply system comprises two units, namely a generation unit and a storage unit. To increase the efficiency of the solar array, a maximum power point tracker (MPPT) is used in the power generation unit. In order to improve the MPPT performance, a novel algorithm is proposed on the basis of the hill climbing method. This method can track the main peak of the array power curve in satellites with long duration missions under unpredicted circumstances such as a part of the array being damaged or the presence of a shadow. A lithium-ion battery is utilized in the storage unit. An algorithm for calculating the optimal rate of battery charging is proposed where the battery is charged with the maximum possible efficiency considering the situation of the satellite. The proposed system is designed and manufactured. In addition, it is compared to the conventional power supply systems in similar satellites. Results show a 12% increase in the overall efficiency of the power supply system when compared to the conventional method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.501-507
• /
• 1999

At the mobile unit for adaptation the propagation environment, it is necessity to adapt very fast the weight coefficient vector of adaptive array antenna In this paper, for the BPSK and BFSK signals with S/I=2, S/N=10 subband adaptive array signal processing method to the linear array antenna using the LMS & the Kalman filter algorithm is proposed. For the 4 elements equidistance linear array antenna systems LMS and Kalman algorithms with subband adaptive instruction principles using the subband signal processing method are adopted and the computer simulation results to the constant amplitude envelope signals such as BPSK or BFSK can be seen that the convergence characteristics of directional patterns and the signal following characteristics are more fast and stable.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.11-22
• /
• 2023

A radiating elements fault diagnosis method with simplified radiation pattern measurement procedure was presented for planar active phased array antenna system. For presenting the mentioned method, the technique for linear approximation based on the radiation characteristics of a planar array configuration and a technique for solving a unique solution problem that occur in process of diagnosing a fault in a radiating elements were presented. Based on the presented method and a genetic algorithm, experimental simulations were performed for radiating element defect diagnosis according to various planar active phased array antenna configurations. As a result, it was confirmed that the presented radiating element fault diagnosis method can be smoothly applied to planar active phased antennas having various configurations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.9
• /
• pp.808-816
• /
• 2016

In this paper, a new technique and cost function which can be to classify jamming signal and target signal from the spectral distribution of received signal in order to minimize the main beam distortion of target signal and to form nulls in the direction of jamming signal in array antennas of single port system is proposed. The proposed cost function is applied to the adaptive algorithm which has the fast convergence and stable nulling performance through the combination of the PSO(Particle Swam Optimization) algorithm and the gradient-based perturbation algorithm, which shows stable nulling performance adaptively even under the moving jamming signal where the incident direction of the jamming signal is changing with time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1621-1626
• /
• 2001

The structural optimization have been carried out in the continuous design space or in the discrete design space. Methods fur discrete variables such as genetic algorithms , are extremely expensive in computational cost. In this research, an iterative optimization algorithm using orthogonal arrays is developed for design in discrete space. An orthogonal array is selected on a discrete des inn space and levels are selected from candidate values. Matrix experiments with the orthogonal array are conducted. New results of matrix experiments are obtained with penalty functions leer constraints. A new design is determined from analysis of means(ANOM). An orthogonal array is defined around the new values and matrix experiments are conducted. The final optimum design is found from iterative process. The suggested algorithm has been applied to various problems such as truss and frame type structures. The results are compared with those from a genetic algorithm and discussed.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.95-102
• /
• 2015

Generally, there is no sorting algorithm much faster than O(nlogn). The quicksort has a best performance O(nlogn) in best and average-case, and $O(n^2)$ in worst-case. This paper suggests virtual radix counting bucket sort such that counting the frequency of numbers in each radix digit, and moves the arbitrary number to proper virtual bucket in the array, and divides the array into radix digit numbers virtually. Also, this algorithm moves the data to proper location within an array for using the minimum auxiliary memory. This algorithm performs k-times such that the number of k digits in given data and the time complexity is O(n). Therefore, this algorithm has a O(kn) time complexity.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.917-920
• /
• 2006

In mobile environments, their is more than one propagation path between each transceiver and Receiver have two or more delayed multipath signals. Delayed multipath signals can cause ISI and Receiver needs a adaptive algorithm to estimate a channel periodically. Also adaptive antenna using adaptive algorithm provide a significant increase in capacity, performance and coverage. This paper describes various LMS algorithm and evaluate the performance of array antenna Base station by using LMS algorithm in the presence of multipath signals and multiple users. As a result of simulation, Adaptive array antenna systems are able to adjust their antenna pattern to select desired signals, and reduce interference.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1395-1401
• /
• 1989

An efficient file allocation algorithm and a new method which calculate appraisal value of candidate computer site for distributed computer systems are proposed. The file allocation problem size is reduced by using the preassignment condition. The appraisal value of candidate node is calcualted as the user state array and node state array are varied according to control variables. As the selection criteria is applied to the candidates, the reasonable node is selected and assign state is determined. The proposed algorithm is heuriatic polynomial time algorithm. By performing algorithm for sample problems. It is shown that the proposed algorithm is superior to conventional method in terms of deviation from optimal solution.