• Annals of Clinical Neurophysiology
• /
• v.16 no.1
• /
• pp.39-41
• /
• 2014

Hemiplegia cruciata (HC) manifests as paralysis of the ipsilateral arm and contralateral leg. Herein, we report a 64-year-old man with weakness of the right leg and of the left arm after multiple sclerosis (MS). His brain and spine magnetic resonance imaging show a lower medulla lesion, which is extended to posterior part of C1 spine through cervicomedullary junction. HC usually results from stroke or trauma, but it is rare as presenting symptom of MS.

• Journal of Information Processing Systems
• /
• v.14 no.4
• /
• pp.980-988
• /
• 2018

Motion estimation is a key Natural User Interface/Natural User Experience (NUI/NUX) technology to utilize motions as commands. HTC VIVE is an excellent device for estimating motions but only considers the positions of hands, not the orientations of arms. Even if the positions of the hands are the same, the meaning of motions can differ according to the orientations of the arms. Therefore, when the positions of arms are measured and utilized, their orientations should be estimated as well. This paper proposes a method for estimating the arm orientations based on the Bayesian probability of the hand positions measured in advance. In experiments, the proposed method was used to measure the hand positions with HTC VIVE. The results showed that the proposed method estimated orientations with an error rate of about 19%, but the possibility of estimating the orientation of any body part without additional devices was demonstrated.

• The Korean Journal of Community Living Science
• /
• v.23 no.2
• /
• pp.137-144
• /
• 2012

This study was undertaken to develop protective gloves for rose farmers who work on thorny plant in Korea. Prototype of protective gloves was designed and evaluated in terms of thermal comfort and mobility. Gloves were made with arm protectors attached to them, so that they could protect the lower part of arms, and rubber bands were inserted into the arm protectors for them not to slip down. The bending part of each finger was punched in order to give ventilation. Also, the bending parts of the fingers in the upper and lower part of gloves were inserted with sponges and were stitched together in order to enhance gripping movement. According to compared evaluation of the developed gloves and the existing gloves, temperature inside the gloves didn't show any significant differences, but humidity inside the gloves showed significant differences. There were significant differences in terms of comparison of objective mobility, that is, pegboard run-time and grip power, from statistical aspects. In addition, a comparison of subjective discomfort showed significant differences and so the suitability of developed gloves was proved.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.45 no.5
• /
• pp.63-71
• /
• 2008

In this paper, we propose a color based hierarchically propagated particle filter that extends the color based particle filter into the articulated upper body tracking. Since color feature is robust to partial occlusion and rotation, the color based particle filter is widely used for object tracking. However, in articulated body tacking, it is not desirable to use the traditional particle filter because the dimension of the state vector usually is high and thus, many samples are required for robust hacking. To overcome this problem, we use a hierarchical tracking method for each body part based on the blown body part. By using a hierarchical tracking method, we can reduce the number of samples for robust tracking in the cluttered environment. Also for human pose recognition, we classify the human pose into eight categories using Support Vector Machine(SVM) according to the angle between upper- arm and fore-arm. Experimental results show that our proposed method is more efficient than the traditional particle filter.

• Korean Journal of Computational Design and Engineering
• /
• v.11 no.1
• /
• pp.49-56
• /
• 2006

In this study, the modeling support system was developed which can make easy and fast FE-modeling and verify the results of static and durability analysis for the lower arm, one of the important parts in automobile suspension module. It took into account of the whole complicated design processes verifying the durability coefficients evaluated by fatigue analysis, which should be used to satisfy a design criteria. To guide the FE-modeling the drive page was constructed by using HTML and XML, which was based on expert's know-hows. It is able to integrate the processes to design the lower arm in practice, so that the standardization of its FE-Modeling is achieved, consequently. The 3 dimensional CAD's geometrical data were changed automatically into pre-defined shell elements under the concept of mesh-offset technique, and then welding elements were treated to connect between target and basic surfaces constructed by the shell elements. This system has also a user interface to control boundary and load ing conditions applied in performing of the static and durability analysis, in which many load cases can be applied simply with the MPCs driven by just few mouse clicks. These were implemented on the platform of MSC.Patran and utilized ANSYS, MSC.Nastran and MSC.Fatigue as the solver of the analysis performed. The developed system brings not only significant decreasing of man-hours required in FE-modeling process, but also obtaining of satisfied qualities in analyzed results. It will be integrated in a part of virtual prototyping module of the developing e-engineering framework.

• Physical Therapy Rehabilitation Science
• /
• v.6 no.4
• /
• pp.208-213
• /
• 2017

Objective: Despite reliable evidence of abnormal scapular motions increases, there is not yet sufficient evidence of abnormal humeral translations. This study aims to analyze the motion of the humeral head toward the scapula when the shoulder is actively abducted using the C-arm. Design: A case report. Methods: The participant was a healthy man without any limitation and pain during shoulder movement. The participant's shoulder was abducted; this movement in the frontal plane was measured using a C-arm (anterior-posterior view) and was analyzed with computer-aided design. The starting posture was $15^{\circ}$, and as the participant abducted his shoulder measurements were taken and analyzed at $30^{\circ}$, $60^{\circ}$, $90^{\circ}$, $120^{\circ}$, $150^{\circ}$, and ending at $165^{\circ}$. A line was drawn perpendicularly to the line connecting the humeral head axis to the glenoid, and another line was drawn perpendiculary to the line connecting the scapular axis to the glenoid. The distance between the two lines measured is defined as the e value. Results: At the starting posture ($15^{\circ}$), the central axis of the humeral head was located 1.92 mm inferior to the central axis of the scapula. The humeral head was superiorly translated from the starting posture to $120^{\circ}$, and then, showed an inferior translation to the ending posture ($165^{\circ}$). Conclusions: The results of this study showed that the humeral head moved upward from the starting posture ($15^{\circ}$) up to $120^{\circ}$ indicating, superior translation, and it moved downward when the posture was past $120^{\circ}$, indicating inferior translation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1149-1156
• /
• 2008

The principle of self clamping friction clutch is presented in this paper and the transmitted torque capacity is also calculated. In order to enlarge the friction force, a part of rotating force of driving side is converted to normal force of friction materials by clamping arm. The increased normal force of friction materials assures the large friction force and the transmitted torque capacity of clutch becomes large. The self clamping friction clutch is adopted in the tube type air pressure clutch and the condition of stability is investigated. It is proven that the inclined angle of clamping arm and the friction factor of friction materials are the essential elements in stability and torque capacity of self clamping friction clutch. The transmitted torque capacity of self clamping friction clutch is compared with air pressure clutch. The normal force of friction lining is magnified by 1/(1-k) and the transmitted torque capacity is also magnified with same proportion comparing with air pressure clutch. The larger the friction factor of friction lining, the larger the magnification factor. The longer the clamping arm, the smaller the magnification factor. It must be also noted that the value of k=${\mu}Y/X$ is the criterion of stability. If the value of k=${\mu}Y/X$ is greater than or equal to 1, the self clamping friction clutch is unstable and it can not be used as clutch.

• The KIPS Transactions:PartA
• /
• v.10A no.4
• /
• pp.389-396
• /
• 2003

InfiniBand technology is being accepted as the future system interconnect to serve as the high-end enterprise fabric for cluster computing. This paper presents the design and implementation of the InfiniBand system interconnect, focusing on an InfiniBand host channel adapter (HCA) based on dual ARM9 processor cores The HCA is an SoC tailed KinCA which connects a host node onto the InfiniBand network both in hardware and in software. Since the ARM9 processor core does not provide necessary features for multiprocessor configuration, novel inter-processor communication and interrupt mechanisms between the two processors were designed and embedded within the KinCA chip. Kinch was fabricated as a 564-pin enhanced BGA (Bail Grid Array) device using 0.18${\mu}{\textrm}{m}$ CMOS technology Mounted on host nodes, it provides 10 Gbps outbound and inbound channels for transmit and receive, respectively, resulting in a high-performance cluster system.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.473-480
• /
• 2009

This paper is to enhance a color image running in the PXA255 ARM processor based on embedded linux environments. Retinex is one of the representative algorithm for image enhancement in the previous research. However, retinex is not suitable the run on the embedded system because of its long processing time. So, we proposed the image enhancement algorithm for embedded system, with less quantity of operation and the effect equivalent to retinex. To achieve this goal, we propose and implement the image enhancement algorithm, which utilizes the image formation model and gamma correction to be effective in a back-light and dark image. The proposed algorithm converts the color space from RGB to HSV, and then V and S channels are processed. In order to optimize the proposed method in the PXA255 ARM processor, quantity of calculation is reduced. The performance of the proposed algorithm was evaluated through qualitative method and quantitative method. The results show that brightness and contrast are improved with less quantity of operation.

• Clinical and Experimental Pediatrics
• /
• v.48 no.12
• /
• pp.1389-1389
• /
• 2005

The long arm duplication of chromosome 3 was reported for the first time in 1966 by Falek et al., and Hirschhorn et al. came to identify the duplication of 3q21${\rightarrow}$qter region in 1973. In most cases of duplication 3q syndrome patients, pure duplication of 3qter is believed to be rare and is often reported accompanied with deletion of another segment of the chromosome. Approximately 75 percent of parents of the patient in the meantime have been demonstrated to have unbalanced translocations or inversions of the chromosome. Partial deletion of the distal part of the short arm of chromosome 3 was first reported by Verjaal and De Nef in 1978 and terminal deletion of chromosome 3 (3p25-qter) has been observed in most cases. In karyotyping of chromosomes of immature infants showing the manifestations of flat occiputs, low set ears, hypertelorism, broad nasal roots, thin lips, web necks, hypotonia, hypertrichosis skin, cryptorchidism etc, we experienced a case diagnosed as 46,XY, rec(3)dup(3)(q21)del(3)(p25)inv(3)(p25q21).