• 동력기계공학회지
• /
• 제16권6호
• /
• pp.30-37
• /
• 2012

Effect of rib heights is found as significant parameter to enhance convective heat transfer performance under laminar and low turbulent regime. Circular ribs with different ribheight to channel height ratios, e/H = 0.05, 0.1, 0.15, are fabricated over the copper substrate respectively in a rectangular duct having 7.5 cross sectional aspect ratio. Only one rib pitch to rib height ratio (P/e = 10) has been chosen for all different height ribs. The result shows that the arithmetic average of turbulence intensity decreases with decreasing roughness height calculated between two ribs under laminar and low turbulent region. It occurs because the area of recirculation and reattachment zone also decreases with decreasing rib height. Optimum thermal enhancement factor is derived by 0.1 rib height to channel height ratio under low turbulent region but 0.15 rib height to channel height ratio gives maximum subjected to laminar flow.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.435-438
• /
• 2002

The Objects of this paper are developing and also improving a high-speed driving system of bushless DC motor(BLDCM) with economical and practical performance. Because BLDC motors are manufactured that each motor can create proper torque for their individual purpose, it is difficult to increase over the rated speed when a motor speed (with it's rated road) is reaching to a maximum speed so the motor torque cannot be increased. This paper verifies the effects of Leading Angle Algorithm, that is proposed on this paper, with examining existing methods to maximize the torque of a motor in high-speed driving area. The arithmetic processor for this experiment is TMS320C240 DSP controller that is designed for a special purpose of motor control in Texis Instrument Inc., and the used Inverter is PM10CSJ060, a Intelligent Power Module of Mitsubishi Corporation.

• 정보보호학회논문지
• /
• 제13권3호
• /
• pp.65-70
• /
• 2003

본 논문에서는 side-channel 공격법 중 SPA(Simple Power Analysis)에 견디면서도 효율적인 연산이 가능한 scalar multiplication 방법과 하드웨어 구조를 제시한다. 기존에 제시된 SPA에 견디는 스칼라 곱셈 방법은 연산 속도가 느린 것이 약점이다. 따라서 이를 보안하는 방법에 대한 연구는 중요한 분야이다. 본 논문에서 제시한 타원곡선암호법 전용 하드웨어는 SPA에 견디면서도 동일한 유한체 연산기(multiplier, inverter)를 사용한다는 가정 하에 Coron의 방법 보다 연산 속도가 빠른 스칼라 곱셈 방법과 구조를 제시한다. 논문에서 제시하는 하드웨어는 n비트 키를 사용할 때 연산 속도가 2n·(Inversion cycle)+3(Multiplication cycle)만이 소요된다.

• 대한안전경영과학회지
• /
• 제24권4호
• /
• pp.117-124
• /
• 2022

This study collected powder extinguishers with 6-10 years of elapsed life from January 2012 to January 2017 in market, factory, and apartment areas to experiment with changes in fineness and to examine the characteristics of extinguishing power. First, in the case of ABC powder, 98.3 wt% of the 8-year market area and 98.6 wt% of the 10-year apartment complex were found to be inappropriate in the first, second, and third arithmetic average analysis of the powder extinguisher from 6 to 10 years. That is, the fine distribution and size of the powder extinguishing agent particles should be managed within an appropriate range. It is analyzed that the powder fire extinguisher may experience a change in the fineness of the powder depending on the external environment exposure, placement, management status, and age of use, resulting in a decrease in digestive power or inability to radiate. Second, the fire extinguisher cannot be used in the initial fire suppression depending on the place of deployment, the environment of deployment, the progress of the number of years of use, and maintenance, so it is necessary to strengthen the device that enables fire extinguisher maintenance and inspection. Third, in the manufacturing process, the charging method should also be reviewed in consideration of the conditions of the workplace, the humid season, and the rainy environment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제4권4호
• /
• pp.307-311
• /
• 2004

This paper presents an efficient architecture that optimizes the design of SEED S-box using composite field arithmetic. SEED is the Korean standard 128-bit block cipher algorithm developed by Korea Information Security Agency. The nonlinear function S-box is the most costly operation in terms. of size and power consumption, taking up more than 30% of the entire SEED circuit. Therefore the S-box design can become a crucial factor when implemented in systems where resources are limited such as smart cards. In this paper, we transform elements in $GF(2^8)$ to composite field $GF(((2^2)^2)^2)$ where more efficient computations can be implemented and transform the computed result back to $GF(2^8)$. This technique reduces the S-box portion to 15% and the entire SEED algorithm can be implemented at 8,700 gates using Samsung smart card CMOS technology.

• 전기전자학회논문지
• /
• 제18권3호
• /
• pp.356-361
• /
• 2014

This paper proposes hardware architecture of HEVC (high efficiency video coding) CABAC (context-based adaptive binary arithmetic coding) binarizer. The proposed binarizer was designed and implemented as an independent module that can be integrated into HEVC CABAC encoder. It generates each bin string of each syntax element in a single cycle. It consists of controller module, TU (truncated unary binarization) module, TR (truncated Rice binarization) module, FL (fixed length binarization) module, EGK (k-th order exp-Golomb coding) module, CALR (coeff_abs_level_remaining) module, QP Delta (cu_qp_delta_abs) module, Intra Pred (intra_chroma_pred_mode) module, Inter Pred (inter_pred_idc) module, and Part Mode (part_mode) module. The proposed binarizer was designed in Verilog HDL, and it was implemented in 45 nm technology. Its operating speed, gate count, and power consumption are 200 MHz, 1,678 gates, and 50 uW, respectively.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.389-392
• /
• 2003

A use of micro processor having H-com functions is gradually increased, and this paper describes the digital servo controller applied to linear pulse motor The TMS320LF2407, made by TI(Texas Instruments Co.), is used as a arithmetic unit in control circuit, designed f3r motor drive and available for the implement of high performance and miniaturization. Also, it can allow the sufficient debugging and downloading into control board for independent operation. A current control in order to carry out a position control is of a digital current control mode, and its implement confirmed the servo control performance of position control.

• Journal of information and communication convergence engineering
• /
• 제15권3호
• /
• pp.160-164
• /
• 2017

Public key cryptography (PKC) is the basic building block for the cryptography applications such as encryption, key distribution, and digital signature scheme. Among many PKC, elliptic curve cryptography (ECC) is the most widely used in IT systems. Recently, very efficient Montgomery-Twisted-Edward (MoTE)-ECC was suggested, which supports low complexity for the finite field arithmetic, group operation, and scalar multiplication. However, we cannot directly adopt the MoTE-ECC to new PKC systems since the cryptography is not fully evaluated in terms of performance on the Internet of Things (IoT) platforms, which only supports very limited computation power, energy, and storage. In this paper, we fully evaluate the MoTE-ECC implementations on the representative IoT devices (16-bit MSP processors). The implementation is highly optimized for the target platform and compared in three different factors (ROM, RAM, and execution time). The work provides good reference results for a gradual transition from legacy ECC to MoTE-ECC on emerging IoT platforms.

• 한국멀티미디어학회논문지
• /
• 제9권12호
• /
• pp.1572-1579
• /
• 2006

An usual acoustic emission(AE) event has two widely characterized parameters in time domain, peak amplitude and event duration. But noise in AE measuring may disturb the signals with its parameters and aggrandize the signal incertitude. Experiment activity of detection of the nick inside of porcelain with AE was made and study on AE signal processing with statistic be presented in this paper in order to pick-up information expected from the signal with noise. Effort is concentrated on developing a novel arithmetic to improve extraction of the characteristic from stochastic signal and to enhance the voracity of detection. The main purpose discussed in this paper is to treat with signals on amplitudes with statistic mutuality and power density spectrum in frequency domain, and farther more to select samples for neural networks training by means of least-squares algorithm between real measuring signal and deterministic signals under laboratory condition. By seeking optimization with the algorithm, the parameters representing characteristic of the porcelain object are selected, while the stochastic interfere be weakened, then study for detection on neural networks is developed based on processing above.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.151-154
• /
• 2004

To use the SLIM for servo system, the exact account of thrust about the initial speed is needed, but analyzing by equivalent circuit analyzing methode such as rotary induction motor, the error occurs because of the end effect. So, we applied the equivalent circuit considering the end effect of SLIM in this paper. The current control system is advanced the space vector pulse width modulation by using high arithmetic performance microprocessor such as DSP. In this paper, we use the dynamic characteristic analyzing methode that can calculate efficiently the end effect by using equivalent circuit methode in the operating SLIM system modeling and examine the output characteristics of SVPWM with PI controller.