• Food Science of Animal Resources
• /
• v.44 no.4
• /
• pp.739-757
• /
• 2024

Camel milk plays a critical role in the diet of peoples belongs to the semi-arid and arid regions. Since prehistoric times, camel milk marketing was limited due to lacking the processing facilities in the camel-rearing areas, nomads practiced the self-consumption of raw and fermented camel milk. A better understanding of the techno-functional properties of camel milk is required for product improvement to address market and customer needs. Despite the superior nutraceutical and health promoting potential, limited camel dairy products are available compared to other bovines. It is a challenging impetus for the dairy industry to provide diversified camel dairy products to consumers with superior nutritional and functional qualities. The physicochemical behavior and characteristics of camel milk is different than the bovine milk, which poses processing and technological challenges. Traditionally camel milk is only processed into various fermented and non-fermented products; however, the production of commercially important dairy products (cheese, butter, yogurt, and milk powder) from camel milk still needs to be processed successfully. Therefore, the industrial processing and transformation of camel milk into various products, including fermented dairy products, pasteurized milk, milk powder, cheese, and other products, require the development of new technologies based on applied research. This review highlights camel milk's processing constraints and techno-functional properties while presenting the challenges associated with processing the milk into various dairy products. Future research directions to improve product quality have also been discussed.

• Journal of the Speleological Society of Korea
• /
• no.68
• /
• pp.99-120
• /
• 2005

It is a wrong decision to use only topographic and geological maps for the study of pediment morphology in Korea. For the study of pediment morphology it is necessary to survey the earth structure by field techniques. In Korea, pediments are mostly found in granite areas with hardrock cover. But, pediments also developed in gneiss areas and what is worse in limestone areas. So, all areas in Korea developed pediment morphology. Only in South Korea pediments show a direction from south to north or from west to east. They developed only in right angles to each other, either parallel or in right angles to the strike, depending on the bedrock structure. Pediments are found in two levels. The upper level pediments are correlated with the lower level erosion surface. Besides this pediments are found in Hoenggye-ri of the Taegwolryong area in a third level 800m above sea level. The pediments developed in basins, at the lower margins of steep slopes dividing three levels of erosion surfaces and around the residual mountains on the erosion surfaces. The first belong to the early stage of pedimentation, the second to the middle stage and the third to the last stage. Also, in Korea monadnock and residual mountain have developed the pediments are correlated the slope of the hinter mountains. Akagki states that the only pedimentation times have been times of arid climate and that they are dissected by gulley erosion with climatic change, but writer's study proves that pedimentation takes place with eustatic movement, reckless defore-station and convectional rain. These facts indicate that the landforms, geological character and process of erosional cycle of the pediments in Korea resemble much those in the Chugoku Mountains of south wertern Japan, but they are larger in scale than those in the Chugoku Mountains. In conclusion, while Akagki emphasizes the geological character and climatic change in pedimentation, the writer studies prove that eustatic movements, especially the sea level rise after the Wurm age are important factors for pedimentation. Besides this the author's studies allow a classification of gentle slopes.

• Journal of the korean society of oceanography
• /
• v.33 no.3
• /
• pp.123-135
• /
• 1998

Cooperative scientific research in Antarctic has been successful since the International Geophysical Year 1957/1958. Presently, 43 nations have joined the Antarctic Treaty as consultative parties or acceding states, and other treaties and agreements have evolved to conserve the integrity and to manage the resources of the Antarctic ecosystem. Although yet to be designated, tourism areas in Antarctica are under consideration. Due to its remoteness and vast magnitude, Antarctica's science is slowly emerging. Satellite technology has enabled observation of the progression of the ozone hole above Antarctica. Mineral exploitation has yet to take place, as has the transport of Antarctic icebergs to some arid nations. On the other hand, both seal and whale exploitations have occurred, devastating these populations. The lessons learned from past human greed are used to design krill and squid fisheries, though the life histories of these organisms are yet to be adequately understood. An ecosystem approach to managing Antarctic resource exploitation is essential. Procuring the needed logistics to do so is daunting, requiring the highest degree of international cooperation and educational outreach to nurture the needed effective scientific and engineering talent, both natural and social.

• The Journal of Information Technology and Database
• /
• v.8 no.1
• /
• pp.41-65
• /
• 2001

This study proposes evaluation dimensions of object-oriented systems modelling tools and activities available in object-oriented systems development practices. The dimensions ale developed based on previous research in cognitive psychology, information systems modeling study, and object-oriented systems analysis arid design areas. The proposed dimension is composed of two dimensions. The one dimension includes abstraction levels of modelling and the other includes process and representation in modeling activities. Experts on object-oriented modeling were selected to evaluate the practical validity of the proposed dimensions and applications of major object-oriented modeling tools during systems development project. Most of the tools were observed to be used for representing objects rather than for modeling the process of related objects. The proposed modeling dimension will be evaluated for acquiring general validity in future empirical research.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.3-6
• /
• 2006

There are three types of frequency-domain loop-loop EM induction method, depending on the loop separation and their location relative to the ground surface: horizontal-loop EM (HLEM), fixed small-loop EM, and helicopter-borne EM (HEM) methods. Multidimensional inversion provides tomographic images of the subsurface resistivity structure and thus enhances the interpretational accuracy of loop-loop EM data. HLEM method is shown to be effective for exploring groundwater resources in weathered and fractured crystalline basement terrains in semi-arid regions. Also, HEM method is useful for locating weak zones in landslide areas. The applicability of inversion to small-loop EM data depends solely on the S/N ratio. The quadrature response of small-loop EM data can only give the equivalent conductivity of a homogenous half-space model, and thus the in-phase component is essential in inverting EM data. However, the in-phase response is much lower and decreases more rapidly with decreasing frequency than the quadrature response. Further work is needed to obtain conductivity-depth images from small-loop EM data.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.709-714
• /
• 2002

This paper discussed and analyzed results of different classification algorithms for land use classification in arid and semiarid areas using CBERS-1 image, which in case of our study is Shihezi Municipality, Xinjiang Province. Three types of classifiers are included in our experiment, including the Maximum Likelihood classifier, BP neural network classifier and Fuzzy-ARTMAP neural network classifier. The classification results showed that the classification accuracy of Fuzzy-ARTMAP was the best among three classifiers, increased by 10.69% and 6.84% than Maximum likelihood and BP neural network, respectively. Meanwhile, the result also confirmed the practicability of CBERS-1 image in land use survey.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.591-593
• /
• 2003

The study demonstrates the data extraction capabilities from the simulated ROCSAT-2 image by manual delineation. The GIS data are able to identify as fifteen categories of the classes I & II for the simulated ROCSAT-2 and SPOT image data. The areas of the paddy are identified almost the same results for both cases, but the arid farmland are identified differently about 30%. The ROCSAT-2 case can be also identified as seven more categories of the class III, but SPOT-4 case cannot.

• Asian-Australasian Journal of Animal Sciences
• /
• v.3 no.4
• /
• pp.305-312
• /
• 1990

The seasonal changes in production, the systems of management and the seasonal climatic and feeding conditions are described for three farms representative of the major areas for growing fine-wool sheep in northern China. At all farms, summer and autumn were seasons of rapid liveweight gain and wool growth. In the winter and spring, during lactation, liveweight declined wool growth decreased by approximately 70%, and fibre diameter by 4 to 8 microns. The wool produced was characterized by a very low clean wool yield (39-51%). Greasy fleece weights ranged from 4.5 to 8.0 kg and average diameter of wool fibres from 20.5 to 23 microns. The number of lambs born per 100 ewes mated ranged from 79 to 95, lamb weights ranged from 3.8 to 4.5 kg, and weaning weights ranged from 17 to 25 kg. Overall, the patterns of sheep production were similar to those found in seasonally arid environments (such as in the mediterranean climatic zone). Yield of clean wool and therefore clean fleece weights were far below those in most other fine-wool producing areas of the world.

• Journal of Ecology and Environment
• /
• v.35 no.4
• /
• pp.323-329
• /
• 2012

The Standardized Precipitation Index (SPI) is a widely used drought index to provide good estimations of the intensity, magnitude and spatial extent of droughts. The objective of this study was to analyze the spatial pattern of drought by SPI index. In this paper, the patterns of drought hazard in Iran are evaluated according to the data of 40 weather stations during 1967-2009. The influenced zone of each station was specified by the Thiessen method. It was attempted to make a new model of drought hazard using GIS. Three criteria for drought were studied and considered to define areas of vulnerability. Drought hazard criteria used in the present model included: maximum severity of drought in the period, trend of drought, and the maximum number of sequential arid years. Each of the vulnerability indicators were mapped and these as well as a final hazard map were classified into 5 hazard classes of drought: one, slight, moderate, severe and very severe. The final drought vulnerability map was prepared by overlaying three criteria maps in a GIS, and the final hazard classes were defined on the basis of hazard scores, which were determined according to the means of the main indicators. The final vulnerability map shows that severe hazard areas (43% of the country) which are observed in the west and eastern parts of country are much more widespread than areas under other hazard classes. Overall, approximately half of the country was determined to be under severe and very severe hazard classes for drought.

• Safety and Health at Work
• /
• v.6 no.3
• /
• pp.218-226
• /
• 2015

Background: The present study aimed to analyze the index value trends of injured employed persons (IEPs) covered in Pakistan Labour Force Surveys from 2001-02 to 2012-13. Methods: The index value method based on reference years and reference groups was used to analyze the IEP trends in terms of different criteria such as gender, area, employment status, industry types, occupational groups, types of injury, injured body parts, and treatment received. The Pearson correlation coefficient analysis was also performed to investigate the inter-relationship of different occupational variables. Results: The values of IEP increased at the end of the studied year in industry divisions such as agriculture, forestry, hunting, and fishing, followed by in manufacturing and construction industry divisions. People associated with major occupations (such as skilled agricultural and fishery workers) and elementary (unskilled) occupations were found to be at an increasing risk of occupational injuries/diseases with an increasing IEP trend. Types of occupational injuries such as sprain or strain, superficial injury, and dislocation increased during the studied years. Major injured parts of body such as upper limb and lower limb found with increasing trend. Types of treatment received, including hospitalization and no treatment, were found to decrease. Increased IEP can be justified due to inadequate health care facilities, especially in rural areas by increased IEP in terms of gender, areas, received treatment, occupational groups and employment status as results found after Pearson correlation coefficient analysis. Conclusion: The increasing trend in the IEP% of the total employed persons due to agrarian activities shows that there is a need to improve health care setups in rural areas of Pakistan.