• Journal of Environmental Impact Assessment
• /
• v.16 no.2
• /
• pp.143-156
• /
• 2007

This study has researched the management status and the pollution level of water, soil, stream sediments of 11 abandoned coal mines out of a total of 12 within Obong-Dam area except Bukyung mine, which was submerged when constructing Obong-Dam, and selected areas which are in needs to have pollution control facilities in the first place. From the results of examination on the runoff at the waste rock pile and mineheads, the runoff from Sueun mine (pH, Fe, Al), Samwon mine (pH, Al), Wangdo mine (pH, Al), Mose mine (pH, Fe, Al) and Daeryeong mine (pH) exceeded the permissible discharge standards of the water quality, but the water at merging point with Obong-Dam after joined with Doma branch satisfied both Water Quality Standards and Drinking Water Quality Standards. In regard to groundwater contamination, it is found that areas where exceeded the Drinking Water Quality Standards are Wangdo mine (pH), Jangjae mine (pH, Zn), Daeryeong mine (pH) whereas all areas satisfied Soil Contamination Warning Standards of Soil Environmental Conservation Law. When comparing a research result on underwater sediments of branches of abandoned mines to the EPA Guidelines for classification of great lakes harbor sediments, Dongguk Gaerim (Fe), Jungwon mine (Fe), Daebo mine (Mn), Samwon mine (Mn) and Daeryeong mine (Mn) showed mid-level of contamination, whereas Sueun (Fe, Mn), Daebo mine (Fe), Woosung mine (Fe, Mn), Wangdo mine (Fe, Mn), Mose mine (Fe) and Daeryeong mine (Fe) showed high-level of contamination. In addition, contamination levels of underwater sediments in Wangsan and Doma branch where abandoned mine's branches merge together, Wangsan branch showed no contamination at all whereas Doma branch shows mid-level of contamination which reflect the Doma branch is affected by waste rock pile and minehead runoff of the abandoned mines in the Doma branch area. It is concluded that Mose mine and Sueun mine required treatment of acid mine drainage. and Wangdo, Jungwon, and Samwon mines were in need of mine tailing and erosion control work. The Samwon mine additionally required a control system for closed minehead runoff. Although the Samwon mine reached a high concentration of Al, Mn $Ca^{2+}$, $SO{_4}^{2-}$ in the runoff, the levels decreased after it was combined with a tributary. It has been concluded that after further monitoring of the cause of pollution, a preventive measure system may be needed to be built.

• Culinary science and hospitality research
• /
• v.11 no.4 s.27
• /
• pp.102-117
• /
• 2005

It was maintained that successful establishment and accomplishment of outsourcing might be possible only when those eating-out companies re-establish their concept of management strategy, identify core competencies through value-chain analysis, make a through cost analysis, select cooperative companies via overall screening, expand the area of outsourcing, enhance partnership to improve service quality, harmonize bilateral organization culture, remove the ambiguity of contract terms, protect core competencies of the rest area, continue with evaluation and control, and spinoff or invest to a new specialized business. Then, it was suggested that highway rest area business construct the core competencies and introduce outsourcing from a future-oriented viewpoint so that they can concentrate the competencies to competitive area and expand outsourcing scope to professional area such as finance and accounting, general affairs, personnel affairs, logistics, marketing, and R&D. They need to make out the problem of productivity reduction resulted from many years working employee's old age, refine human resource, and maintain the standards of skill so that they can improve service quality of the rest area, streamline each organization currently having so a large manpower, reduce manpower, and improve the productivity.

• Journal of The Korean Association For Science Education
• /
• v.31 no.3
• /
• pp.429-439
• /
• 2011

The purpose of this study was to analyze the Jeju beach science camp program and to survey the participating students'' preference levels for the activities included therein. The camp programs were analyzed on the basis of the standards set for the HASA curriculum. The program's "manipulatory skill" area included many manipulatory and creative activities while the "inquiry area" included many basic and integrated inquiry activities. It was also indicated that the "knowledge area" included many activities appropriate for understanding concepts and principles while the "attitude area" included many activities appropriate for stimulating curiosity and enjoyment. Thus, it could be seen that the areas stipulated for the HASA curriculum were considerably consistent with the purpose of the science camp. The participating students showed preference for manipulatory and creative activities included in the program. They also preferred basic, inquiry level activities included under the area of "inquiry skills." It was identified that the students most preferred the conceptual stage included under the area of "knowledge" where they were required to grasp the common characteristics of events, things, and phenomena, as also the enjoyment stage included under the "attitude" area, where they were required to participate in pleasant science activities. These findings indicate that science camp programs should be composed of manipulatory and creative activities as well as activities that aim at basic research and the understanding of concepts.

• Journal of Korea Multimedia Society
• /
• v.20 no.6
• /
• pp.853-864
• /
• 2017

HD padding area is essential redundancy in HD broadcasting. It is possible to use this padding area for the purpose of improving DTV broadcasting services. For utilization of this area, The bit of a service data was converted to black and white $8{\times}8$ block image. Converted block images are compressed with active video and are delivered to a receiver as only DC coefficients in a video stream. video quality is not effected by the proposed method, and service data was perfectly recovered in receiver without errors by using block average and threshold. The proposed utilization of HD essential padding area can possibly overcome the limited transmission stream rate with the bandwidth of HD broadcasting. If service data in transport or video stram were transferred using this padding area, it is possible to improve video quality with expanded video stream rate. Additionally, because the proposed methods are based on well-established standards, it is also useful for world-wide HD broadcasting systems such as ATSC, DVB, and IPTV.

• Journal of the East Asian Society of Dietary Life
• /
• v.10 no.3
• /
• pp.179-189
• /
• 2000

Changes in eating culture patterns has been observed among modern Koreans from seeking out traditional types of eating out restaurant to the modern, luxurious, and hybrid food. This study aimed to investigate the patterns of eating out and preference of food in Pusan National University (PNU) area, representing typical Patterns of eating out in Pusan. Data revealed that the most popular places in which the subjects visited were Korean traditional restaurants and snack bars. The names of the places were in trendy style of Korean connotation, with Intention to appeal to the new generation. The interviewee reported that decision making on choice of plates were made by taste, price, and service in that order. The frequency of eating out was once In two or three days, Korean traditional restaurants, noodle shops, and restaurants of offering fusion food being the Place of choice. Preferred reasons for the PNU area were reported to be low price, followed by variety of food offered and geographical accessibility to the places. Most of the interviewees in the area were satisfied with the taste of food and service quality. A list of food they were willing to introduce to oversea foreigners included raw fish, Dongrae Pajon, Pulgoki, Kimchi and dog soup in that sequence. The results of survey indicator that changes in the eating out environment in Pusan were improvement of service quality, development of new recipes, improvement of hygiene standards and development of area-specific food. The results may also act as a guide in changing the eating out environment and developing tourism in Pusan.

• Journal of Environmental Science International
• /
• v.5 no.1
• /
• pp.7-14
• /
• 1996

Two experiments were conducted to evaluate breathing zone air quality in Taegu, using automatic analyzers for four air quality standards($SO_2$, $NO_2$, CO, and $O_3$). First, air target compounds were measured for 8 to 12 hours in each of two commercial areas and five residential areas. Second, air target compounds were hourly measured for 24 hours in each of two commercial areas, two residential areas, and an industrial complex area. Based on the first experiment the breathing zone air was more polluted in the commercial area as compared to the residential area, while the second experiment showed that the breathing zone air was polluted rather in the residential are3 as compared to the commercial area. The second experiment also indicated that there was some variation of breathing zone air concentration with time and measuring sites. Diurnal variation of breathing zone air concentrations was consistent with previous studies which measured at building height. The highest breathing zone air concentration was shown in Seongseo industrial complex area. An unusual finding of this study was that $SO_2$ concentration in the breathing zone air of Bisandong, a typical residential area of Taegu, was higher than that of other residential areas, even higher than that of Seongseo industrial complex area.

• Tunnel and Underground Space
• /
• v.30 no.6
• /
• pp.551-558
• /
• 2020

This note presents the calculation of nominal area for rock core specimen under direct shear testing condition. The initial nominal area was assumed as ellipsoid, and the equations for calculating the nominal area are derived. The normalized shear displacement and normalized nominal area have an identical relationship regardless of the ellipsoid shape. New testing constants and the generalized method were suggested to calculate the decrease of the nominal area. The method was applied to calculate the direct shear testing data and the changes of result were discussed.

• Journal of information and communication convergence engineering
• /
• v.12 no.4
• /
• pp.228-236
• /
• 2014

One of major purposes of these standard technologies is to ensure interoperability between entities from different vendors and enable interworking between various technologies. As interoperability and interworking are essential for machine-to-machine communications (M2M) and Internet of Things (IoT) for them to achieve their ultimate goal, i.e., things to be connected each other, multiple standards organizations are now working on development M2M/IoT related specifications. This paper reviews the current activities of some of the most relevant standardization bodies in the area of M2M and IoT: third-generation partnership project (3GPP) core and radio network aspects, broadband forum, and oneM2M. The major features and issues being focused upon in these standards bodies are summarized. Finally, some key common trends among the different bodies are identified: a common service layer platform, new technologies mitigating an explosive growth of network traffic, and considerations and efforts related to the development of device management technologies.

• Journal of Energy Engineering
• /
• v.12 no.3
• /
• pp.241-252
• /
• 2003

As more and more residential complexes will be developed in the future, this paper tries to establish the definitions and standards for the estimation of power demands in these areas and propose standards for the estimation of power demands for power companies and construction companies to settle the debates surrounding this issue. Through a survey and analysis of existing areas, new standards that will enable more accurate estimation of power demands in new cities complexes to be developed in the future are established by calculating the average load density, load factor, utilization factor by area, use and building size after dividing the facilities into building type. Also, for general hospitals, sports facilities and government buildings of the non residential building category, metropolitan areas, where these facilities are concentrated, are surveyed and analyzed.

• Proceedings of the KIEE Conference
• /
• 2006.10d
• /
• pp.263-264
• /
• 2006

City Train Technology that is large and complex system and consists of mechanical, electronic, electric, materials, computer, communication, civil/track etc. is very important area of railway industry, national fundamental industry. The standardization of city train system as a public transportation method and foundation of national economy is very important in order to do effective operation and to get fundamental technology, and the information system of the standards is required to operate the city train system effectively. By building data base of city train system design knowledge using computer-aided system engineering tool-Cradle, the system development issues and the design solutions are used by all engaged persons, and are managed by modeling and documentation. And this system will support architecture design consistently and effectively by applying this system to formalize early development process, to system requirements and configuration management, to system interface analysis and management and to system behavior analysis etc.. This study is for construction of data base of system design knowledge through making data base of many kinds of standards using CASE tool based on System Engineering Process, and introduces a model to support concurrent engineering for all engineers involved in system development allowing access to standard DB through Web from anywhere and at anytime.