• 한국광물학회지
• /
• 제15권3호
• /
• pp.195-204
• /
• 2002

광물조성과 노출표면적(exposed surface area)은 토양풍화속도 계산모델에 영향을 미치는 중요한 요인들이다. PROFILE 등 기존의 풍화속도 계산모델에서는 입도분석자료에 기초한 기하학적 계산값이나 $N_2$-BET 비표면적 등을 그대로 노출표면적으로 적용하고 있다. 그러나, 토양은 광물과 유기물의 혼합체로써 노출표면적을 정확히 구하기는 상당히 어려운 것이 사실이다. 본 연구에서는 유기물의 영향에 의한 토양광물의 노출표면적변화를 토양 깊이에 따른 peroxidation 전후의 N2-BET 비표면적값을 통해 살펴보고, 토양칼럼실험을 이용하여 풍화속도의 차이를 살펴보았다. 실험결과 peroxidation 후의 $N_2$-BET 비표면적은 1.68~4.87 $m^2$/g의 범위에서 증가하였으며, 깊이에 따라 증가하는 범위가 감소하는 경향을 보여주었다 이는 부식산 등 토양표면에 농집되어 존재하는 다양한 형태의 유기산 등이 광물의 노출표면적을 감소시키고 있다는 것을 의미한다고 할 수 있다 기존의 토양풍화속도 모델에서 토양광물 노출표면적변화 계산에 있어서 광물-유기산간의 결합에 의한 영향을 결합세기 측면에서 고려하고 정량화 하는 것이 향후과제라고 생각된다.

• 한국터널지하공간학회 논문집
• /
• 제5권1호
• /
• pp.71-88
• /
• 2003

지하수 오염에 대한 광역적인 취약성 평가를 위한 DRASTIC 시스템은 미국 EPA에서 개발된 것으로서 지하수위, 충진률, 대수층매체, 토양매체, 지형경사, 비포화대매체, 수리전도도등 수리지질학적 요소들을 이용하여 지하수 오염 취약성을 상대적으로 평가하기 위한 표준화된 시스템으로 현재 널리 사용되고 있다. 본 연구에서는 GIS 기법을 활용하여 기본 DRASTIC 모델에 구조선 밀도, 토지이용, 터널굴착으로 인한 지하수위 저하의 영향을 추가한 변형된 DRASTIC 모델을 개발하고 ${\bigcirc}{\bigcirc}$지역의 터널굴착으로 인한 지하수 오염가능성을 평가하고자 하였다. 통계적인 분석을 위하여 각각의 인자별 벡터 레이어를 격자레이어로 전환하고 각 인자별 상관계수, 3방향의 주성분분석에 의한 공분산, 고유치, 고유벡터 등을 구하여 인자들의 상관관계를 비교 분석하였다. 또한, 일반적인 DRASTIC 레이어와 구조선 밀도 레이어, 토지이용 레이어, 터널굴착영향 레이어간의 상관계수를 각각 구하고, 이를 각각의 가중치로 적용하여 최종적인 변형된 DRASTIC 모델을 구축하고자 하였다. 변형된 DRASTIC 모델을 사용한 결과 일반적인 DRASTIC 모델에 비해 오염 가능지역이 많이 세분화되었고, 그 결과를 활용하여 오염가능성이 높은 취약지역을 구체적으로 구분할 수 있었다.

• 자원환경지질
• /
• 제20권3호
• /
• pp.159-168
• /
• 1987

Some physico-chemical properties such as surface area, moisture content, cation exchange capacity, swelling rate, pH, viscosity and liquid limit have been determined for evaluation of Cabentonite deposit occurring in four localities; Yonil, Gampo, Haseo and Pohang, in Gyeongsang-do. Montmorillonite contents can be derived from surface area measurement. Enhancement of liquid limit values and swelling volume were observed in the samples which had higher exchangeable Na ion and finer particle-size distribution. Identical results were observed even in the Na-exchanged samples. This suggests that aggregation effects have a great influence on physico-chemical properties. Aggregation of montmorillonite were controlled not only burial depth but also composition of exchangeable cation. Consequently, sample occurred in Yonil area where has the greatest burial depth in the area show somewhat lower physico-chemical properties than those of samples occurred in the other localities. However, the basic test applied in this study provides very useful preliminary information relating to its commercial potential.

• Annals of Clinical Neurophysiology
• /
• 제8권2호
• /
• pp.125-134
• /
• 2006

Among the various physiological factors that affect nerve conduction velocity (NCV), temperature is the most important. Because the influence of temperature is the most important source of error. It is known from animal experiments that conduction is eventually completely blocked at low temperatures, the myelinated A fibers being the first affected and the thin fibers of group C the last. Many studies showed that the NCV decreases linearly with lowering temperature within the physiological range. The distal motor latency increased by $0.2msec/^{\circ}C$ drop in temperature between $25^{\circ}C$and $35^{\circ}C$ in the median, ulnar and peroneal nerves. The temperature affect the neuromuscular transmission; The miniature endplate potential (MEPP) and endplate potential (EPP) are increase with increasing temperature. In myasthenia gravis, the reduction in the decremental response is observed following cooling. The lowering temperature make increase the amplitude of sensory compound action potential; make enlarge the surface area of compound muscle action potential with very little increase in amplitude; make diminish the fibrillation potential and increase the myotonia in needle electromyography (EMG). Because of these findings mentioned above, the skin temperature should be routinely monitored and controlled during nerve conduction tests and needle EMG and should be taken into account when interpreting the findings.

• Asian Journal of Atmospheric Environment
• /
• 제8권3호
• /
• pp.126-139
• /
• 2014

In order to estimate the influence of sources on $PM_{2.5}$ in the industrial area of Japan, we carried out a source analysis using chemical component data of $PM_{2.5}$. $PM_{2.5}$ samples were collected intermittently at an industrial area in Japan from July 2010 to November 2012. Water soluble ions ($Cl^-$, $NO_3{^-}$, $SO{_4}^{2-}$, $Na^+$,$NH_4{^+}$, $K^+$, $Mg^{2+}$, $Ca^{2+}$), elements (Al, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, Sb, Pb), and carbonaceous species (OC, EC) of the $PM_{2.5}$ (a total of 198 samples) were analyzed. Positive Matrix Factorization (PMF) model was applied to the data of those chemical components to identify the source of $PM_{2.5}$. At this observation site, nine factors were extracted. The major contributors of $PM_{2.5}$ were secondary sulfate 1, in which loading factors of $SO{_4}^{2-}$ and $NH_4{^+}$ were large (percentage source contribution: 20.9%), traffic, in which loading factors of OC (organic carbon) and EC (elemental carbon) were large (20.8%), secondary sulfate 2, in which loading factors of K and $SO{_4}^{2-}$ were large (8.0%), steel mills (7.8%), secondary chloride and nitrate (7.0%), soil (5.0%), heavy oil combustion (3.8%), sea salt (3.8%), and coal combustion (2.3%). The conditional probability function (CPF) and the potential source contribution function (PSCF) were carried out to examine the influence of a regional source and a broad-based source, respectively. CPF results supported local source influences such as steel mills, sea salt, traffic, coal combustion, and heavy oil combustion. PSCF results suggested that ships in the East China Sea, an industrial area of the east coastal region of China, and an active volcano in the Kyushu region of Japan were potential regional sources of secondary sulfate 1. Secondary sulfate 2 was affected by the burning of biomass fields and by coal combustion in Chinese urban areas such as Beijing, Hebei, and western Inner Mongolia. Source characterization using continuous data from one site showed a potential source representing fossil fuel combustion is affected both by regional and broad-based sources.

• 한국환경과학회지
• /
• 제26권2호
• /
• pp.211-220
• /
• 2017

For areas with the diverse contamination sources, the change of 4-nitrophenol contamination and impact of potential contamination sources have been evaluated using monitoring data and a numerical model (HydroGeoSphere). The model considered several parameters including land cover, precipitation, and flow rate. And, the model has been performed to investigate the effect of decay rate of 4-nitrophenol. The results of the simulations showed that the influence on 4-nitrophenol in downstream was mainly greater than that in upstream, and the tributaries did not significantly affect the mainstream because of their low flow rates. In addition, the effect of contamination sources was simulated for each section, then the measured data were higher than the corresponding simulated data in most sections of the Geumho river. In particular, the impact of the potential contamination sources in the upstream area was much higher than that in the other area, thus more monitoring data for the upstream area is required.

• 아태비즈니스연구
• /
• 제14권4호
• /
• pp.129-150
• /
• 2023

Purpose - This study is based on the Theory of Planned Behavior and aims to explore the decision-making mechanisms of consumers participating in value co-creation activities within virtual brand communities. Methodology - The research involved a comprehensive survey of 405 participants from various virtual brand communities. Structural Equation Modeling (SEM) was used for data analysis, applying SPSS and AMOS to test the hypotheses. The study focused on community rules and regulations, community experience and community trust. Results - The research found that community rules and regulations significantly impact subjective norms and perceived behavioral control, but not directly influence consumer attitudes. Community experience positively affected consumer attitudes, subjective norms and perceived behavioral control. Community trust was found to positively influence these aspects of consumer decision-making. However, a gap was identified in the direct influence of perceived behavioral control on actual consumer behavior. Implications - The findings of this study contribute to a more comprehensive understanding of factors affecting consumer behavior in virtual brand communities. It underscores the necessity for community managers to develop strategies that consider these internal decision-making mechanisms, facilitating more effective community engagement. The study also identifies a potential area for future research in the direct influence of perceived behavioral control on actual consumer behavior.

• 농촌계획
• /
• 제11권2호
• /
• pp.9-19
• /
• 2005

The purpose of this study is to analyze the potential soil loss and hazard zone by the Revised Universal Soil Loss Equation(RUSLE) for preservation and management of land resources which is the base of ecosystem, and to grasp the relationship between RUSLE factors in the Nakdong River Basin. All thematic maps used in RUSLE are constructed through GIS and spatial analysis method derived from digital topographic maps, detailed soil maps, land-cover maps, and mean annual precipitation of 30 years collected respectively from National Geographic Information Institute, National Institute of Agricultural Science and Technology, and Ministry of Environment. The slope length of LS-factor that takes much times by the study area's wideness was calculated automatically through AML(Arc Macro Language) program developed by Van Remortel et al.(2001, 2003). The results are as follows; First, according to the soil loss estimation by the RUSLE, it shows that approximately 82% of the study area have relatively lower possibility of soil loss which is the 1 ton/ha in annual soil loss. While, 9.4% ($2,228km^2$) needed intensive and continuous management for soil loss. Because the amount of their annual soil loss was greater than 10 ton/ha that is optimum level suggested by Morgan(1995). For these areas, the author believe that a new approach which can minimize environmental impacts from soil loss through improvement of cultivation process and buffer forest zone should be applied. Second, according to the relationship between the RUSLE factors, topographical(LS-factor) and cover management(C-factor) conditions have a lot of influence on soil loss in case of the Nakdong River Basin. However, because of RUSLE factor's influence that affect to soil loss might be different based on the variety of spatial hierarchy and extent, it is necessary to analyze and evaluate factor's relationship in terms of spatial hierarchy and extent through field observations and further studies.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.172-177
• /
• 2016

In this paper, various electrochemical experiments were conducted in seawater solution to evaluate corrosion damage behavior of arc thermal sprayed Inconel 625 coating on SS400 steel in marine environment. As a result, corrosion damages of thermal sprayed Inconel 625 coating preferentially occurred at the defect area, and they were observed as a form of pitting corrosion in the galvanostatic experiments. In Tafel analysis, corrosion current density of Inconel 625 coating was relatively high due to influence of interconnected pores and Cr oxides in the thermal spray coating layer. On the other hand, the result of the potential measurement, thermal sprayed Inconel 625 coating should need the post-treatment which can compensate the defects like pores and cracks because Inconel 625 coating presented a higher potential of about 290 mV than that of the SS400 steel.

• Advances in Energy Research
• /
• 제4권3호
• /
• pp.203-211
• /
• 2016

A good understanding of the chemical composition and structural characteristics of a carbonaceous material is essential in conversion processes. Understanding how the composition and structural changes influence the burning behaviour of coal is important when assessing a coal's potential for utilization. To explore the potentials of a typical Nigerian coal, both conventional and advanced analytical techniques such as proximate analysis, ultimate analysis, calorific value, surface area analyser, SEM, FTIR, XRD and SAXS were employed. The results obtained from these characterizations agree favourable well with a typical South African coal that is of enormous contribution to the gross domestic product (GDP) of the nation economy.