• 제목/요약/키워드: Area dose

검색결과 1,092건 처리시간 0.034초

핫셀시설의 방사선 안전성 평가 (Evaluation on the Radiological Shielding Design of a Hot Cell Facility)

  • 조일제;국동학;구정회;정원명;유길성;이은표;박성원
    • 방사성폐기물학회지
    • /
    • 제2권1호
    • /
    • pp.1-11
    • /
    • 2004
  • 한국원자력연구소에서는 고온의 용융염 매질 하에서 사용 후 핵연료를 환원시키는 차세대관리종합공정 연구를 수행 중에 있다. 추후 본 기술개발을 실증시험 하기 위해서는 방사선 차폐능이 확보된 핫셀이 필수적이며, 핫셀은 최대 1,385TBq의 방사능량에 대한 차폐 안전성을 가져야 한다. 최대 방사선원에 대한 핫셀의 차폐능을 확보하기 위하여, 본 연구에서는 실증시험 시 사용후핵연료부터 발생하는 중성자 및 감마선에 의한 선량률이 법적 허용선량치보다 낮게 유지되도록 핫셀의 차폐 설계에 대한 안전성을 평가하였다. QAD-CGGP 및 MCNP-4C 코드를 이용하여 핫셀 차폐체의 설계치에 대한 차폐 계산을 수행하였다. 작업구역에 대한 감마선 차폐계산 결과 QAD-CGGP 코드는 2.10${\times}$$10^{-3}$, 2.97${\times}$$10^{-3}$ mSv/h, MCNP-4C 코드는 1.60${\times}$$10^{-3}$, 2.99${\times}$$10^{-3}$ mSv/h 이었으며, 서비스 구역은 1.01${\times}$$10^{-2}$, 7.88${\times}$$10^{-2}$ mSv/h 로 평가되었다. 그리고 MCNP-4C코드를 이용하여 중성자에 의한 선량률을 계산한 결과, 중성자에 의한 선량률은 감마에 의한 선량률의 약 20% 이하치를 나타내었다. 따라서 선량률 대부분은 감마선에 의한 영향임을 알 수 있었다. 본 연구를 통하여 핫셀의 차폐 설계치가 작업구역의 선량 제한치 0.01 mSv/h 와 서비스 구역에서의 선량 제한치 0.15 mSv/h를 만족시키는 것을 확인할 수 있었다.

  • PDF

복부CT에서 면적에 따른 CTDI와 유효선량 및 SNR의 비교 연구 (A Comparative Study of CTDI and the Effective Dose and the SNR according to the Area in the Abdominal CT)

  • 최성준;강준국;김수인;김윤호;이도경;정진경;조아라;장재혁;권대철
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제38권3호
    • /
    • pp.245-252
    • /
    • 2015
  • 복부CT에서 면적을 산출하여 CTDI (computed tomography dose index) 변화에 따른 유효선량 및 SNR (signal to noise ratio)을 비교함으로써 진단적 가치가 높은 영상을 얻는 동시에 환자가 받는 피폭 선량 감소를 목적으로 한다. 복부CT 검사 환자 60명을 $400-499cm^2$ (12명), $500-599cm^2$ (21명), $600-699cm^2$ (17명), $700-799cm^2$ (9명) 4그룹으로 나누었다. 복부CT 데이터를 ImageJ 프로그램을 이용하여 환자의 면적을 산출하였고, CTDI, DLP, SNR 및 유효선량을 계산하였다. 복부면적이 증가할수록 CTDI는 7.3 mGy에서 13 mGy로 증가였고, DLP는 $394.4mGy{\cdot}cm$에서 732로, 유효선량에서도 5.9 mSv가 11mSv로 증가하였다. SNR은 12.7에서 15 dB을 유지하였다. 복부면적에 따른 CTDI의 평균은 8.9 mGy, DLP의 평균은 $481.54mGy{\cdot}cm$, 유효선량은 7.2 mSV로 산출되었다. 복부하중계수에 DLP를 곱하여 산출한 유효선량은 통계적의로 유의한 차이가 없었고 (p < .05), SNR에서는 유의한 차이가 있었다(p > .05). 복부CT 영상검사에서 영상의 질 향상을 위해서는 환자의 면적에 따른 CTDI를 고려하여 환자의 피폭선량을 감소시킬 수 있어야 한다.

자궁경부암 강내 방사선 조사장치에 의한 직장 및 방광의 피폭선량 평가 (Dose Distribution of Rectum and Bladder in Intracavitary Irradiation)

  • 추성실;오원용;서창옥;김귀언
    • Radiation Oncology Journal
    • /
    • 제2권2호
    • /
    • pp.261-270
    • /
    • 1984
  • The intrauterine irradiation is essential to achieve adequate tumor dose to central tumor mass of uterine malignancy in radiotherapy. The complications of pelvic organ are known to be directly related to radiation dose and physical parameters. The simulation radiation and medical records of 203 patients who were treated with intrauterine irradiation from Feb. 1983 to Oct. 1983, were critically analized. The physical parameters to include distances between lateral walls of vaginal fornices, longitudinal and lateral angles of tandem applicator to the body axis, the distance from the external os of uterine cervix to the central axis of ovoids were measured for low dose rate irradiation system and high dose rate remote control afterloading system. The radiation doses and dose distributions within cervical area including interesting points and bladder, rectum, according to sources arrangement and location of applicator, were estimated with personal computer. Followings were summary of study results ; 1. In distances between lateral walls of vaginal fornices, the low dose rate system showed as $4\~7cm$ width and high dose rate system showed as $5\~6cm$. 2. In horizontal angulation of tandem to body axis, the low dose rate system revealed mid position$64.6\%$, left deviation $19.2\%$and right deviation $16.2\%$. 3. In longitudinal angulation of tandem to body axis, the mid position was $11.8\%$ and anterior angulation $88.2\%$ in low dose rate system but in high dose rate system, anterior angulation was $98.5\%$. 4. Down ward displacement of ovoids below external os was only $3\%$ in low dose rate system and $66.7\%$ in high dose rate system. 5. In radiation source arrangement, the most activities of tandem and ovoid were 35 by 30 in low dose rate system but 50 by 40 in high dose rate system. 6. In low and high dose rate system, the total doses an4 TDF were 50, 70 Gy and 141, 123, including 40 Gy external irradiation. 7. The doses and TDF in interesting points Co, B, were 93, 47 Gy and 230, 73 in high dose rate system but in low doss rate system, 123, 52 Gy and 262, 75 respectively. 8. Doses and TDF in bladder and rectum were 70, 68 Gy and 124, 120 in low dose rate system, but in high dose rate system, 58, 64 Gy 98, 110 respectively, and then grades of injuries in bladder and rectum were 25, $30\%$ and 18, $23\%$ respectively.

  • PDF

조직 표면에서의 베타선 흡수선량 측정 (Measurement of Absorbed Dose at the Tissue Surface from a Plain $^{90}Sr+^{90}Y$ Beta Sources)

  • 하석호;김정묵;육종철
    • Journal of Radiation Protection and Research
    • /
    • 제16권2호
    • /
    • pp.17-26
    • /
    • 1991
  • 외삽형 전리함을 사용하여 $^{90}Sr+^{90}Y(1.65mCi)$ 베타선원에 대해 교정점 30cm 거리에서 조직표면의 흡수선량을 측정하였다. 이때 흡수선량 측정에 영향을 주는 유효단면적, 입사창 감쇠율, 극성효과, 이온 재결합을 등의 보정인자를 분석하였다. 이들 인자를 보정한 후의 조직표면의 흡수선량은 $1.493{\mu}Gy/sec({\pm}2.9%)$로 평가되었다.

  • PDF

Transmission Dose Estimation Algorithm for in vivo Dosimetry

  • Yun, Hyong-Geun;Huh, Soon-Nyung;Lee, Hyoung-Koo;Woo, Hong-Gyun;Shin, Kyo-Chul;Ha, Sung-Whan
    • Journal of Radiation Protection and Research
    • /
    • 제28권1호
    • /
    • pp.59-63
    • /
    • 2003
  • Purpose : Measurement of transmission dose is useful for in vivo dosimetry of QA purpose. The objective of this study is to develope an algorithm for estimation of tumor dose using measured transmission dose for open radiation field. Materials and Methods : Transmission dose was measured with various field size (FS), phantom thickness (Tp), and phantom chamber distance (PCD) with a acrylic phantom for 6 MV and 10 MV X-ray Source to chamber distance (SCD) was set to 150 cm. Measurement was conducted with a 0.6 cc Farmer type ion chamber. Using measured data and regression analysis, an algorithm was developed for estimation of expected reading of transmission dose. Accuracy of the algorithm was tested with flat solid phantom with various settings. Results : The algorithm consisted of quadratic function of log(A/P) (where A/P is area-perimeter ratio) and tertiary function of PCD. The algorithm could estimate dose with very high accuracy for open square field, with errors within ${\pm}0.5%$. For elongated radiation field, the errors were limited to ${\pm}1.0%$. Conclusion : The developed algorithm can accurately estimate the transmission dose in open radiation fields with various treatment settings.

두부 CT 검사 시 테이블 높이에 따른 선량과 화질에 관한 연구 (A Study on Radiation Dose and Image Quality according to CT Table Height in Brain CT)

  • 김기원;오주영;민정환;이상선;이영봉;임경환;이윤
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제46권2호
    • /
    • pp.99-106
    • /
    • 2023
  • The height of the table should be considered important during computed tomography (CT) examination, but according to previous studies, not all radiology technologists set the table at the patient's center at the examination, which affects the exposure dose and image quality received by the patient. Therefore, this study intends to study the image quality exposure dose according to the height of the table to realize the optimal image quality and dose during the brain CT scan. The head phantom images were acquired using Philips Brilliance iCT 256. When the image was acquired, the table height was adjusted to 815, 865, 915, 965, 1015, and 1030 mm, respectively, and each scan was performed 3 times for each height. For the exposure dose measurement, optically stimulated luminescence dosimeter (OSLD) was attached to the front, side, eye, and thyroid gland of the head phantom. In the signal to noise ratio (SNR) measurement result, The SNR values for each table height were all lower than 915 mm. As a result of exposure dose, the exposure dose on each area increased as the table height decreased. The height of the table has a close relationship with the patient's radiation exposure dose in the CT scan.

건축자재내 포함된 천연방사성핵종에 의한 실내 공간의 방사선량 평가 (External Exposure Due to Natural Radionuclides in Building Materials in Korean Dwellings)

  • 조윤해;김창종;윤주용;조대형;김광표
    • Journal of Radiation Protection and Research
    • /
    • 제37권4호
    • /
    • pp.181-190
    • /
    • 2012
  • 건축자재에 포함된 천연방사성핵종은 실내공간에 거주하는 일반인의 주요 피폭선원이다. 본 연구에서는 콘크리트 벽체에 존재하는 천연방사성 핵종에 의한 한국인의 실내에서의 외부피폭 방사선량을 평가하였다. 한국인의 주거실태, 실내공간의 크기 등을 고려하여 선량평가를 위한 표준 방의 크기를 결정하였다. 표준 방 이외의 다양한 크기의 공간에 대해서도 선량평가를 실시하였다. 방사선수송 코드인 MCNPX를 사용하여 실내공간에서의 공기 중 흡수선량을 계산하였으며, 이를 이용하여 유효선량률을 계산하였다. 콘크리트 벽체로만 이루어진 $3{\times}4{\times}2.8m^3$ 크기의 표준 방의 경우, 콘크리트 내 우라늄계열, 토륨계열, $^{40}K$ 핵종의 농도에 따라 공기 중 흡수선량률은 0.80, 0.97, 0.08 nGy $h^{-1}$ per Bq $kg^{-1}$이었으며, 유효선량률은 0.57, 0.69, 0.058 nSv $h^{-1}$ per Bq $kg^{-1}$이었다. 실내공간의 크기를 $5-30m^2$로 다양하게 변화시키더라도 천장/바닥 그리고 벽에 의한 상반된 선량률 변화로 인하여 전체 방사선량률은 실내 면적의 변화에 상관없이 거의 일정한 값을 보였다. 실제 국내에서 주로 사용되는 콘크리트 내의 천연방사성 핵종의 농도 및 한국인의 실내공간에서 생활양식 등을 토대로 한국인의 실내공간에서의 외부피폭 방사선량률 및 연간 유효선량을 평가하였다. 콘크리트 내의 우라늄계열, 토륨계열, $^{40}K$ 핵종의 농도가 각각 26, 39, 596 Bq $kg^{-1}$인 경우 공기 중 흡수선량률은 대략 104 nGy $h^{-1}$이었다. 일반인의 실내 점유율이 89%인 경우, 연간 유효선량은 0.59 mSv이었다. 국내의 일반적인 실내공간에서 콘크리트 벽체 내에 존재하는 천연방사성물질에 의한 연간 유효선량은 실내점유율${\times}8760\;h\;y^{-1}{\times}(0.57C_U+0.69C_{Th}+0.058C_K)$을 이용하여 계산할 수 있다.

방사선관리구역내의 종사자 및 임상실습 학생의 개인피폭선량 비교 분석 (Analysis of Individual Exposure Dose of Workers and Clinical Practice Students in Radiation Management Area)

  • 이주아
    • 한국콘텐츠학회논문지
    • /
    • 제17권11호
    • /
    • pp.383-388
    • /
    • 2017
  • 방사선구역내의 종사자 간 선량 비교 및 동일한 구역 내에서 임상실습에 임하는 학생들의 선량을 추가하여 비교함으로써 방사선방어의 최적화 구현에 대한 기초자료를 제공하고자 하였다. 연구 대상은 2016년 1월부터 동년 12월까지 C대학병원 방사선 관리구역에 재직 중인 방사선관계종사자 121명과 방사선작업종사자 36명, 그리고 8주간의 임상실습을 이수한 121명의 학생을 비교 대상으로 하였다. 방사선관계종사자와 작업종사자 간의 심부 및 표층 선량은 관계종사자가 각각 $.7440{\pm}1.676mSv$$.7753{\pm}1.730mSv$로 가장 높게 나타났으며, 통계적으로 매우 유의하였다(p<.01). 세 그룹 간에는 심부 선량의 경우 임상실습학생이 $.143{\pm}.136mSv$로 가장 높게 나타났고, 표층 선량에서도 $.1513{\pm}.139mSv$로 가장 높게 나타났으며, 작업종사자가 두 경우 모두 가장 낮았다. 그룹 간의 평균의 차이는 통계적으로 매우 유의하였다(p<.01). 결론적으로 ALARA(As Low As Reasonably Achievable)원칙에 의거 철저한 관리가 필요하며, 특히 방사선안전관리의 사각지대에 놓여 있는 임상실습 학생에 대한 체계적인 피폭선량 관리가 필요할 것으로 사료된다.

흉부 전·후방향 검사 시 고관전압 및 산란선 후처리 소프트웨어 적용이 화질과 선량에 미치는 영향 (Effect of High Tube Voltage and Scatter Ray Post-processing Software on Image Quality and Radiation Dose During Chest Anteroposterior Radiography)

  • 김종석;주영철;이승근
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제44권4호
    • /
    • pp.295-300
    • /
    • 2021
  • This study aims to present new chest AP examination exposure conditions through a study on the effect on image quality and patient dose by applying high tube voltage and scatter ray post-processing software during chest AP examination in digital radiography equipment. This study was used a human body phantom and in the chest AP position, the dosimeter was placed horizontally at the thoracic spine 6. The experiment was conducted by dividing into a low tube voltage (70 kVp, 400 mA, 3.2 mAs) group and a high tube voltage (100 kVp, 400 mA, 1.2 mAs) group. The collimation size (14″× 17″) and the source to image receptor distance(110 cm) were same applied to both groups. Radiation dose was presented to dose area product and entrance surface dose. Image quality was compared and analyzed by comparing the difference between the signal-to-noise ratio and the contrast-to-noise ratio of the image according to the application of the scatter ray post-processing software under each condition. The average value of the entrance surface dose in the low and high tube voltage conditions was 93.04±0.45 µGy and 94.25±1.51 µGy, which was slightly higher in the high tube voltage condition, but the dose area product was 0.97±0.04 µGy and 0.93±0.01 µGy. There was a statistically significant difference in the group mean value(p<0.01). In terms of image quality, the values of the signal-to-noise ratio and the contrast noise ratio were higher in the high tube voltage than in the low tube voltage, and decreased when the scattering line post-processing function was used, but the contrast resolution was improved. If there is a scatter ray post-processing function during chest AP examination, it is helpful to actively utilize it to improve the image quality. However, when this function is not available, I thought that applying a higher tube voltage state than a low tube voltage state will help to realize images with a large amount of information without changing the dose.

다중 센서들을 이용한 다양한 화재 상황의 위험도 추정 시스템 개발 (Implementation of Fire Risk Estimation System for various Fire Situations using Multiple Sensors)

  • 이광재;이연성
    • 센서학회지
    • /
    • 제25권6호
    • /
    • pp.394-398
    • /
    • 2016
  • In this paper, a fire detection system based on quantitative risk estimation is presented. Multiple sensors are used to build a comprehensive indicator that represents the risk of fire quantitatively. The proposed fire risk estimation method consists of two stages which determines the occurrence of fire and estimates the toxicity of the surveillance area. In the first stage, fire is reliably detected under diverse fire scenarios. The risk of fire is estimated in the second stage. Applying Purser's Fractional Effective Dose (FED) model which quantitates harmfulness of toxic gases, the risk of the surveillance area and evacuation time are calculated. A fire experiment conducted using four different types of combustion materials for the verification of the system resulted in a maximum error rate of 12.5%. By using FED calculation and risk estimation methods, the proposed system can detect various signs of fire faster than conventional systems.