• New & Renewable Energy
• /
• 제3권3호
• /
• pp.14-19
• /
• 2007

A flow channel model of a bipolar plate with varying cross-sectional area was newly designed for improving performance and efficiency of a PEM fuel cell stack. As a result, the varying cross-sectional area model showed poor uniformity in velocity distribution, however, maximum velocity in the flow path is about 30% faster than that of the uniform cross-sectional area model. The proposed varying cross-sectional area model is expected to diffuse operating fluids more easily into diffusion layer because it has relatively higher values in pressure distribution compared with other flow channel models. It is expected that the implementation of the varying cross-sectional area model can reduce not only the mass transport loss but also the activation loss in a PEM fuel cell, and open circuit voltage of a fuel cell can thus be increased slightly.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제10권4호
• /
• pp.223-233
• /
• 2002

The air distribution duct with multiple outlets is an essential part of automotive air-conditioning system In a bus. The estimation of airflow rate in an automotive air-conditioning duct is typically very complicate due to large variations in cross-sectional area and abrupt changes in flow direction, as well as unbalanced distribution of the flow. In this paper, the flow characteristic in a duct with multiple outlets is investigated through experiment, CFD simulation and a one-dimensional simulation. Numerical simulations have been performed for two simplified air conditioning ducts with multiple outlets used in a medium bus. The three dimensional Navier-Stokes code was used to evaluate the overall pressure, velocity Held, and distribution rate at each diffuser according to the change of various design parameters such as ratio of cross-sectional area and radius of bifurcated region. In addition, a one-dimensional program based on Bernoulli equation was developed to obtain optimized diffuser area required to equalize discharge flow rate at each outlet. As a result of this study, optimized diffuser area of design variable by one-dimensional program was very reasonable as compared to the trend deduced from CFD Simulation. Therefore, the simple and convenient one-dimensional analysis developed in this study can be applied in practical design procedure for air-conditioning duct.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제15권1호
• /
• pp.7-16
• /
• 2009

The purpose of this study was to evaluate current packaging modules and design the most acceptable packaging module for domestic and international distribution systems. An optimum packaging module can reduce package costs as well as total distribution costs such as transport, materials handling and warehouse costs. Three different sizes of packaging modules, namely U-type($600{\times}500\;mm$), K -ype($550{\times}366\;mm$) and I-type($600{\times}400\;mm$), were evaluated in terms of the area efficiency and MOEs(measures of effectiveness) for the T-11($1100{\times}1100mm$) and T-12($1,200{\times}1,000\;mm$) pallets. The results showed that the U-type module could fit very well for both pallets and the area efficiency of each module was more than 99 percents. Area efficiency of K-and I-type modules was greatly affected by the pallet footprint dimensions. U-type module also performed better result from MOEs evaluation. Twenty sub-multiple sizes derived from the U-type module were suggested for the future development of the Korean and ISO standards on dimension of transport packages.

• Journal of the Korean Geographical Society
• /
• 제39권3호
• /
• pp.360-373
• /
• 2004

The purpose of this study is establishing how to build the area of local agents and regional offices in the oil company using GIS technique by reviewing on the spatial distribution pattern and characteristics of the sales area of oil products. Location-allocation and spatial interaction model are cooperated in order to establish sales area of petroleum products distribution system. Location-allocation model is used in the capital region where local agents are concentrated on like Kyoung-gi local agent. Spatial interaction model is used in the rest of the area in Korea to analyze the sales range of the regional offices in oil company. Each office made a big difference in registered cars and population because of the level of petroleum consumption in each sales area.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제32권3호
• /
• pp.266-272
• /
• 1996

The distribution and abundance of fish in the Cheju southeastern area was studied by the combined hydroacoustic and bottom trawl surveys in April 1994 and in July 1995, respectively. The main purpose of these investigations was to provide the basic data for this management and the biomass estimation of commercially important demersal fish stocks in this area. The hydroacoustic surveys were performed by using a 50 kHz scientific echo sounder system with a microcomputer-based echo integrator. Acoustical measurements of fish abundance and distribution were conducted along the cruise tracks of research vessel and during all trawl hauls by continuous echo sounding. The average weight-normalized target strength for demersal fish aggregations was derived from the relationship between the mean volume backscattering strength for the depth strata of trawl hauls and the weight per cubic meter of trawl catches. The geographical distribution of fish stocks in the 1994 survey area was investigated in relation to oceanographic conditions. The results obtained can be summarized as follows: 1. From the 1994 and 1995 survey data, the relationship between the mean volume backscattering strength (, dB) for the depth strata of trawl hauls and the weight (W, kg/$m^3$) per cubic meter of trawl catches was expressed by the following equation = - 32.8+ lOlog(W) The average weighted-target strength value at 50 kHz derived from this equation was .. 32.8 dB/kg. 2. In 1994 and 1995, both surveys showed a trend of decreasing fish abundance toward the southern area of the Cheju Island with high densities offish along the west coast ofth.e Tsushima Island. The highest demersal concentrations in the southern area of the CheJu Island appeared in bottom waters colder than $12^{\circ}C.$. . 3. From the results of combined bottom trawl and hydroacoustic surveys, the estunated fish densities in the southeastern area of the Cheju Island were 1.5488 x $10^-4$kg/$m^3$ in the 1994 surveyand 1.9498 x $10^-4$kg/$m^3$ in the 1995 survey, respectively.

• Journal of Soil and Groundwater Environment
• /
• 제26권1호
• /
• pp.1-7
• /
• 2021

Air-water interfacial area is of great importance for the analysis of contaminant mass transfer processes occurring in the soil systems. Capillary bundle model has been proposed to estimate the specific air-water interfacial areas in unsaturated soils. In this study, the measured air-water interfacial areas of a soil (loam) using the gaseous interfacial tracer technique were compared to those from capillary bundle model. The measured values converged to the specific solid surface area (7.6×104 ㎠/㎤) of the soil. However, the simulated air-water interfacial areas based on the capillary bundle model deviated significantly from those measured. The simulated values were substantially over-estimated at low end of the water content range, whereas the model under-estimated the air-water interfacial area for the most of the water content range. This under-estimation is considered to be caused by the nature of the capillary bundle model that replaces the soil pores with a bundle of glass capillaries and thus no surface roughness at the inner surface of the capillaries is taken into account for the estimation of the air-water interfacial area with the capillary bundle model. Subsequently, appropriate correction is necessary for the capillary bundle model to estimate the air-water interfacial area in soils. Since the soil-moisture release curve data is the basis of the capillary bundle model, the model can be of use due to its simplicity, while the gaseous tracer technique requires complicated experimental equipment followed by moment analysis of the breakthrough curves. The size distribution profile of the pores filled with gas estimated by the water retention curve was found to be similar to that of particle size at different size range. The shifted distribution of gas-filled pores toward smaller size side compared to the particle size distribution was also found.

• The Journal of the Korea Contents Association
• /
• 제21권4호
• /
• pp.434-446
• /
• 2021

Recently, there has been a growing interest in the fourth industrial revolution, expected to have a significant impact on society. However, there are only a few studies on spatial distribution and location of the fourth industry. This study tried to classify the spatial distribution of the fourth industry by using LQ, a non-geographical method, and Getis-Ord's Gi^*, a geographical method. The results of the analysis are as follows. First, there are the specialized areas of the fourth industry in the non-Seoul metropolitan area as well as the Seoul metropolitan area. Second, industrial clusters and neighborhood areas of the fourth industry were located mostly in the Seoul metropolitan area. Third, industrial clusters were concentrated on the southern part of Gyeonggi Province and Seoul, and there are no industrial clusters in the northern part of the Seoul metropolitan area and the nature conservation area. This paper shows that the cluster area of the fourth industry is concentrated in the Seoul metropolitan area. Therefore, policies for the 4th industry are needed to solve this unbalanced spatial distribution of the fourth industry.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• 제33B권6호
• /
• pp.136-148
• /
• 1996

In this paper, we analyze the traffic characteristics in microcell and macrocell overlaid PCS system which process voice and dta calls separately each others. in this system, data calls are delayed in queue when all of channels are occupied, while voice calls are bolcked in that case. For this, we calculated inter-microcell handoff area dwelling time distribution and handoff area dwelling time distribution between microcell and macrocell. We analyze traffic performance using this results. We used M/M/C/K model, and analyzed traffic performance of macrocell with handoff area variation of microcell.

• Journal of Distribution Science
• /
• 제1권1호
• /
• pp.63-85
• /
• 1999

• Economic and Environmental Geology
• /
• 제28권3호
• /
• pp.199-211
• /
• 1995

The deep sea camera system could render it possible to obtain the detailed information of the nodule distribution, but difficult to estimate nodule abundance quantitatively. In order to estimate nodule abundance quantitatively from deep seabed photographs, the nodule abundance equation was derived from the box core data obtained in KODOS area(long.: $154^{\circ}{\sim}151^{\circ}W$, lat.: $9^{\circ}{\sim}12^{\circ}N$) during two survey cruises carried out in 1989 and 1990. The regression equation derived by considering extent of burial of nodule to Handa's equation compensates for the abundance error attributable to partial burial of some nodules by sediments. An average long axis and average extent of burial of nodules in photographed area are determined according to the surface textures of nodules, and nodule coverage is calculated by the image analysis method. Average nodule abundance estimated from seabed photographs by using the equation is approximately 92% of the actual average abundance in KODOS area. The measured sampling points by box core or free fall grab are in general very sparse and hence nodule abundance distribution should be interpolated and extrapolated from measured data to uncharacterized areas. The another goal of this study is to depict continuous distribution of nodule abundance in KODOS area by using PC-version of geostatistical model in which several stages are systematically proceeded. Geostatistics was used to analyse spatial structure and distribution of regionalized variable(nodule abundance) within sets of real data. In order to investigate the spatial structure of nodule abundance in KODOS area, experimental variograms were calculated and fitted to a spherical models in isotropy and anisotropy, respectively. The spherical structure models were used to map out distribution of the nodule abundance for isotropic and anisotropic models by using the kriging method. The result from anisotropic model is much more reliable than one of isotropic model. Distribution map of nodule abundance produced by PC-version of geostatistical model indicates that approximately 40% of KODOS area is considered to be promising area(nodule abundance > $5kg/m^2$) for mining in case of anisotropy.