• Title/Summary/Keyword: Area Control Center

Search Result 1,195, Processing Time 0.031 seconds

Investigation of the Interactions between Anionic Polymer and Nonionic Surfactant with Rheological and Surface Tension Measurements (유변학적 특성과 표면장력측정을 통한 음이온성 폴리머와 비이온성 계면활성제의 상호작용에 대한 연구)

  • Lee, Jung-No;Kim, Dong-Joo;Koh, Ha-Young
    • Journal of the Korean Applied Science and Technology
    • /
    • v.24 no.2
    • /
    • pp.160-166
    • /
    • 2007
  • The rheological properties and surface tensions of polymer solutions and polymer-surfactant mixed solutions were investigated. The polymers used in this study were a homopolymer of acrylic acid crosslinked with an allyl ether of pentaerythritol, an allyl ether of sucrose, or an allyl ether of propylene (CARBOMER), acylate/C10-30 alkyl acylate crosspolymer (AAAC), and ammonium acryloydimethyltaurate/VP copolymer (ADTV). A solubilizing agent PEG-40 hydrogenated castor oil (HCO-40) and an emulsifying agent polyoxyethylene (20) sorbitan monostearate (POLYSORBATE 60) made the micelles intervening between AAAC polymers, resulting in the increase of viscosity. However, HCO-40 made this behavior over the wider range of surfactant concentration than POLYSORBATE 60. From the view point of surface tensions in the same range of surfactant concentration, AAAC/HCO-40 solution showed the area of increasing surface tension with surfactant concentration in contrast to the AAAC/POLYSORBATE 60 solution showing no increasing area.

A Study of the Combustion Characteristics Using a 2-valve Sl Optically Acessible Engine with SCV (SCV를 장착한 2밸브 Sl 가시화기관의 연소특성에 관한 연구)

  • Jeong, Gu-Seop;Jeon, Chung-Hwan;Jang, Yeong-Jun
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.25 no.12
    • /
    • pp.1692-1701
    • /
    • 2001
  • This study describes the combustion characteristics under various condition of air excess ratio and ignition timing in a 2-valve SI optically accessible engine with swirl control valve(SCV). It adapted three different types of SCV(open ratio 72.5%, 78%, 59%) to strengthen a swirl flow. Pressure data were acquired using pressure sensor to investigate the effect of swirl flow on combustion, and from these pressure data, IMEP(indicated mean effective pressure) and MFB(mass fraction burnt) were calculated to explain burn rate and flame speed. From acquired flame images, we inspected the flame propagation direction, flame area, and flame centroid. Flame propagation direction showed different tendency between with/without SCV, and flame area with SCV was faster and larger than that of conventional engine. Finally, the representative flame images at each crank angle were acquired by PDF method to verify flame growth process. It is found that strengthened swirl flow is more beneficial for faster and stable combustion.

A Study to Determine of Acceptable Noise Regulations on Roadside Noise Abatement (도로변 방음대책 수립시 합리적인 소음규정 적용에 대한 연구)

  • Son, Jung-Gon;Kim, Jeung-Tae;Jo, Yun-Hee
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 2011.10a
    • /
    • pp.550-555
    • /
    • 2011
  • The road traffic noise has emerged major noise as the overcrowding of the urban population and the explosion of car storage capacity. There are limits for establishing the measures to meet noise standard because of the increase of high-rise building and insufficient distance between residential areas and road in urban center areas. Therefore, this study analyze the problem of the application of national road noise standard, and present the alternatives to achieve environmental standards in conjunction with the soundproofing measures. To reduce the population ratio exposed to road noise on seoul motorway, we suggest some action plane are as follows: i) Roadside noise standard of nighttime beside daytime is the first noise reduction goals ii) Noise standard of Noise and vibration control act is priority in case of existing area iii) Noise standard of basic environmental policy act is priority in case of new area.

  • PDF

A Study on the Dynamic Management System of the Small Business - Chiefly on the Small Business in Jeon-Buk Territory - (중소기업의 동태적 경영제도에 관한 연구 - 전북지역의중소기업을 중심으로 -)

  • 차정연
    • Journal of Korean Society of Industrial and Systems Engineering
    • /
    • v.7 no.10
    • /
    • pp.17-27
    • /
    • 1984
  • In order to foster the minor enterprises effectively we will have to take a proper step to control and adjust the excessive competitions of large-enterprises and minor as well as among minor enterprises, We should promote the relationship serialized between minor - and large - enterprises and establish mediation and control organizations and governmental policies to create re-subcontract among small and medium enterprises. To help the development of medium md small enterprises in Jeon-Buk area, therefore, Kunsan city should be designated as a Growth Position City. The reason is as follows. 1) Because Kunsan is located in Middle Western Seaside geographycally, and in the central place of our country as a key point of sea-transportation, we can cultivate the national land widely. 2) As an ocean gateway city of Kum River basin, Kunsan is a good place that can reform Hoh-nam inland of Kwang-iu, Jeon-ju, I-ri, and like places as well as central inland area of Dae-jeon, Chong-ju, etc.. 3) Kunsan is an advanced-base for constituting an industrial region of Weatern roast that has a spacious coastral industrial region and is connected with inland industrial park of Jeon-ju and I-ri and Jang-hang, Bi-in, etc.. From the above reason. Kunsan should be designated as a growth position city that can induce and promote the development of center of Western coast.

  • PDF

Two Layer Multiquadric-Biharmonic Artificial Neural Network for Area Quasigeoid Surface Approximation with GPS-Levelling Data

  • Deng, Xingsheng;Wang, Xinzhou
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.2
    • /
    • pp.101-106
    • /
    • 2006
  • The geoidal undulations are needed for determining the orthometric heights from the Global Positioning System GPS-derived ellipsoidal heights. There are several methods for geoidal undulation determination. The paper presents a method employing a simple architecture Two Layer Multiquadric-Biharmonic Artificial Neural Network (TLMB-ANN) to approximate an area of 4200 square kilometres quasigeoid surface with GPS-levelling data. Hardy’s Multiquadric-Biharmonic functions is used as the hidden layer neurons’ activation function and Levenberg-Marquardt algorithm is used to train the artificial neural network. In numerical examples five surfaces were compared: the gravimetric geometry hybrid quasigeoid, Support Vector Machine (SVM) model, Hybrid Fuzzy Neural Network (HFNN) model, Traditional Three Layer Artificial Neural Network (ANN) with tanh activation function and TLMB-ANN surface approximation. The effectiveness of TLMB-ANN surface approximation depends on the number of control points. If the number of well-distributed control points is sufficiently large, the results are similar with those obtained by gravity and geometry hybrid method. Importantly, TLMB-ANN surface approximation model possesses good extrapolation performance with high precision.

  • PDF

Energy Efficient Topology Control based on Sociological Cluster in Wireless Sensor Networks

  • Kang, Sang-Wook;Lee, Sang-Bin;Ahn, Sae-Young;An, Sun-Shin
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • v.6 no.1
    • /
    • pp.341-360
    • /
    • 2012
  • The network topology for a wide area sensor network has to support connectivity and a prolonged lifetime for the many applications used within it. The concepts of structure and group in sociology are similar to the concept of cluster in wireless sensor networks. The clustering method is one of the preferred ways to produce a topology for reduced electrical energy consumption. We herein propose a cluster topology method based on sociological structures and concepts. The proposed sociological clustering topology (SOCT) is a method that forms a network in two phases. The first phase, which from a sociological perspective is similar to forming a state within a nation, involves using nodes with large transmission capacity to set up the global area for the cluster. The second phase, which is similar to forming a city inside the state, involves using nodes with small transmission capacity to create regional clusters inside the global cluster to provide connectivity within the network. The experimental results show that the proposed method outperforms other methods in terms of energy efficiency and network lifetime.

Location-based Area Setup Method and Optimization Technique for Deviation Detection (위치기반 영역 설정 방법 및 이탈 검출의 최적화 기법)

  • Choi, Jae-Hyun;Lim, Yang-Won;Lim, Han-Kyu
    • The Journal of the Korea Contents Association
    • /
    • v.14 no.4
    • /
    • pp.19-28
    • /
    • 2014
  • Recent advancements in the IT industry have made daily life more convenient than ever before. In particular, studies have focused on the position detection of individuals using the GPS in smartphones, and this application has been utilized actively in emergency rescue organizations. However, existing methods send the location information of a user to a predetermined guardian set by the user or to a control center when the user enters into or deviates from a predetermined space. Such spaces are created by an arbitrary radius, thereby making it difficult to set a detailed area by using an existing radius-area creation method in an unstructured space and path with a specific road, such as for trekking, amusement parks, or mountaineering. This study proposes a novel method for setting up an area by connecting multiple radii to improve the existing radius-area creation method in order to easily set a detailed area in smart devices or on the Internet. In addition, an optimization method for resource use is proposed by comparing the operation results in which a user's location is detected by using the proposed location-based area setup method and deviation detection.

Characteristics of Korean Trauma Patients: A Single-center Analysis Using the Korea Trauma Database

  • Park, Youngeun;Chung, Min;Lee, Gil Jae;Lee, Min A;Park, Jae Jeong;Choi, Kang Kook;Hyun, Sung Youl;Jeon, Yang Bin;Ma, Dae Sung;Yoon, Yong-Cheol;Lee, Jungnam;Yoo, Byungchul
    • Journal of Trauma and Injury
    • /
    • v.29 no.4
    • /
    • pp.155-160
    • /
    • 2016
  • Purpose: Two years have passed since a level I trauma center was officially opened in the Gacheon Gil Hospital, South Korea. We analyzed 2014 and 2015 registered patient data from the Korean Trauma Data Base (KTDB) to identify trends in trauma patient care and factors that influence the quality of trauma care at the Gacheon Gil trauma center. Methods: Data was extracted from the KTDB included patient age, sex, systolic blood pressure at emergency room arrival, revised trauma score, injury severity score, trauma injury severity score, transfusion amount, and the cause of death was analyzed. Results: A total of 3269 trauma patients were admitted to our trauma center in 2014 and 3225 in 2015. Demographics and mechanism of injury were not significantly different between years. The severity of trauma injury was decreased in 2015 although the mortality rate was slightly increased. This requires further analysis. Conclusion: The aim of this study was to determine the general status and trends in trauma incidence and management outcomes for the Incheon area. We noted no significant changes in trauma status from 2014 to 2015. We need to collect and review trauma patient data over a long period in order to elucidate trauma incidence and management trends in the trauma field. Finally, studies using trauma patient data will indicate appropriate quality control factors for trauma care and help to improve the quality of trauma management.

Comparison of the Neointima Inhibition Between Paclitaxel- and Sirolimus-Eluting Expanded Polytetrafluoroethylene Hemodialysis Grafts in a Porcine Model

  • Baek, Insu;Cho, AJin;Hwang, Jinsun;Kim, Heasun;Park, Jong-Sang;Kim, Dae Joong
    • Bulletin of the Korean Chemical Society
    • /
    • v.34 no.6
    • /
    • pp.1663-1667
    • /
    • 2013
  • Neointimal hyperplasia causes vascular access dysfunction in hemodialysis patients with synthetic arteriovenous (AV) grafts. Several studies have reported that paclitaxel- or sirolimus-eluting AV grafts inhibit neointimal hyperplasia and display lower rates of stenosis compared with control grafts. However, there have been few comparative studies of the efficacy of paclitaxel- and sirolimus-eluting grafts. We compared the neointimal hyperplasia of paclitaxel- and sirolimus-eluting grafts. AV grafts were implanted laterally between the common carotid artery and the external jugular vein in 12 female Landrace pigs. The animals were sacrificed six weeks after surgery. The neointimal hyperplasia at the anastomosis sites of the grafts was quantified using the ratio of the intragraft hyperplasia to the graft area (H/G ratio) at the graft-vessel interface. The area of intimal hyperplasia at the venous (paclitaxel 1.06 [0.72-1.56] vs sirolimus 2.40 [1.72-3.0] $mm^2$, P = 0.04) and arterial anastomosis sites (paclitaxel 0.93 [0.57-1.48] vs sirolimus 2.40 [1.72-3.0] $mm^2$, P = 0.04) was significantly different between the two groups. However, the H/G ratios for the venous anastomosis site (paclitaxel 0.25 (0.17-0.38) vs sirolimus 0.38 (0.2-0.66), P = 0.4) and the arterial anastomosis site (paclitaxel 0.19 (0.08-0.39) vs sirolimus 0.41 (0.34-0.50), P = 0.1) did not differ significantly between the groups. In conclusion, there was no significant difference in the inhibition of neointimal hyperplasia by sirolimus- and paclitaxel-eluting AV grafts.

The study on the Carpal Tunnel Syndrome by dental hygienists at Gwangju·Jeonnam Area (광주·전남지역 치과위생사의 수근관증후근에 대한 연구)

  • Shim, Hyung-Soon
    • Journal of Korean society of Dental Hygiene
    • /
    • v.4 no.2
    • /
    • pp.225-236
    • /
    • 2004
  • It has been suggested in research results thai dental hygienists have high risk of carpal tunnel syndrome, mainly caused by the repeated motion of extensor and flexor or the use of vibration tools, compared to other occupations. To find out the situation of the carpal tunnel syndrome of dental hygienists, who are exposed to work-related musculoskeletal disorders, this study used 132 questionnaires given on May 22, 2004, the period of continuing education of the first half year in the Gwangju Jeonnam area, and obtained the following results. 1. Subjects worked at a dental ciinic(32.6%), a hospital(31.8%), and a public health center(35.6%). Age by work was under 24 in a clinic(17.4%) and a hospital(15.9%), and over 30 in a public health center(35.6%). 2. In practice conducted over one time a day, a scaling accounted for 90.7% in a doctor's office; 595% in a hospital; and 3.0% in a public health center, suggesting significant difference(p<0.01). Pit and fissure sealant accounted for 53.5% in a clinic; 53.2% in a hospital; and 95% in a public health center, also suggesting significant difference(p0.01). 3. Symptoms of carpal tunnel syndrome appeared in a wrist(12.1%), a right hand(14.4%), and a left hand(5.3%). 4. In case of temporary crown practice, symptoms appeared in a wrist(22.0%), a right hand(14.0%), and a left hand(4.0%), suggesting significant difference(p<0.01). The above results showed that 12.1% of dental hygienists was exposed to carpal tunnel syndrome. Thus, it is considered very important that dental hygienists should be given education of the danger of continuous work in certain motions and prevention education of improving repeated position, and make efforts to reinforce self-control ability.

  • PDF