• Journal of the Korean Geotechnical Society
• /
• v.20 no.9
• /
• pp.155-166
• /
• 2004

The characteristics of soft clays are very important for the land development plan. This study is to investigate correlations between the engineering properties and the characteristics of clay minerals of the undisturbed clay samples obtained from Sihwa area. This study included X-Ray diffraction analysis, X-Ray fluorescence spectrometer analysis, scanning electron microscopy analysis and energy dispersive X-Ray spectrometer analysis. The correlations between the clay mineral properties and the laboratory and field testing results were investigated. The characteristics of soft clay in Sihwa area were compared with those in Yangsan and Kunsan area.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.2
• /
• pp.55-61
• /
• 2010

Using 3D point data implemented from terrestrial LiDAR, this research has modelled geospatial data in 2 categories(gridded & un-gridded) and conducted LOS analysis experiment using outcome from the modeling exercise. To compare LOS analysis results from each of the 2 models in the above, maximum LOS (line of sight) range in the experimental area was specified as 30m in Area A, 40m in Area B and 50m in Area C and the time taken by LOS analysis and the number of visible points were measured. As for the LOS analysis experiment results, in comparison with the gridded model, the un-gridded model took about 3.9 times more time in Area A, 5.4 times in Area B and 6.5 times in Area C. In addition, about 0.97 times fewer points were measured in Area A, 0.93 times in Area B and 0.94 times in Area C. The difference between gridded model and un-gridded model in terms of the time taken by LOS analysis increased, as the maximum LOS range extended. On the other hand, the number visible points did not vary significantly in reference to the size of visible range.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.243-248
• /
• 2007

This study proposed a procedure to improve the error defection of attached cadastral maps using digital map data. In addition, this study also provided the direction for the accuracy improvement of attached cadastral maps by comparing analysis methods. - such as centroid, Lee Sallee shape index, and area index. The analysis is performed as follows. First, by using centroid measurement, the center point of cadastral maps and attached cadastral maps are compared. Secondly by using Lee Sallee shape measurement, the location accuracy of range area is investigated. Thirdly, by using area measurement, the range area within allowable error scope is verified. Based on analysis, the discrepancy between cadastral maps and the attacked cadastral maps are detected as follows; 98.2% from Lee Sallee shape index, 41.8% from centroid, 15.4% from area index in the whole error.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1036-1041
• /
• 2008

In order to analysis the reason of sliding failure in embankment slope under construction in soft soil area, a model section located in Gimhae Region in Gyeongsangnam-Do, where the sliding failure had been occurred during embankment works in soft soil area, had been selected. This area had been firstly treated with the Pack Drain Method, and additional embankment works of 9.7 meters out of total 14 meters in thickness had been under construction. The results of analysis showed that the reason of sliding failure were overspeed in embankment construction and the overestimation of design factors in calculating strength of each layer of embankment and poor management and inaccuracy reading of measurement devices.

• Journal of the Korean Wood Science and Technology
• /
• v.26 no.2
• /
• pp.29-37
• /
• 1998

An image analysis program with the function of measuring various quantitative characteristics in the transverse surface of wood was developed using Delphi 2.0. Data on pore characteristics (conditions for image processing, proportion of pores in relationship to other elements, tangential diameter, area, tangential and radial diameter, x and y coordinates of pore center, and geometric coefficients) were saved in text file format. In addition, the pore area histogram in the tangential and radial directions was saved as a BMP (bitmap) type file. Analyses indicated that quantitative characteristics such as the relative radial distribution of pores in a growth ring, pore tangential area histogram, and proportion of pore in lumen area appear to be useful in separating four diffuse-porous woods and four ring-porous woods on the species level.

• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.1
• /
• pp.83-88
• /
• 2010

This paper has analyzed Seoul metropolitan area on the basis of cluster characteristics and it is to understand the traits of each clusters. In order to modelize the area, 10 different indicators were selected among components of a city such as population, activities, land and facilities. Also through principal component analysis, similar characteristics or congenialities of the variables were derived as a common factor. The result was organized by factor score from hierarchical clustering method and as a final result, metropolitan area was clustered into five areas.

• Journal of Technologic Dentistry
• /
• v.27 no.1
• /
• pp.27-39
• /
• 2005

This study is to show the qualitative analytic methods of facial asymmetry with three-dimensional morphometry and find out asymmetry change resulted from enlarging three local regions. Steel balls (1.2mm in diameter) were attached in twenty seven landmarks of a symmetrical artificial human skull. This artificial human skull was used as experimental materials. Twelve different asymmetrical artificial human skulls were formed by gradually enlarging the mandibular body length, gonial angle, and ramus height of the left hemiface. From the three-dimensional morphometry of each skull type, nine local area measurements and three total sum area measurements(representing the mandibular area, maxillary area, and lower facial area) were acquired and made into the surface area asymmetry degree. Menton deviation itself was used as the surface area asymmetry degree while right-left percentages were used in the other measurements. These surface area asymmetry degrees were compared with each other to find out asymmetry change according to the degree of actual facial asymmetry. Through the statistical analysis, following results were obtained. The results were as follows: 1. Left maxillary area of artificial human skull was 7.13$\pm$0.26% larger while mandibular area was 4.14$\pm$0.12% smaller than each those of right hemiface. After all, left lower facial area was 1.44$\pm$0.07% larger than those of right hemiface.(n=7). 2. Among the reduce rates of surface area asymmetry degree resulted from enlarging three local regions, ramus height was similar to mandibular body length while it was bigger than those of gonial angle. 3. Among the increase rates of menton deviation resulted from enlarging the local regions, ramus height was the biggest, mandibular body length was the second and gonial angle was the smallest. These results suggest that three-dimensional morphometry can be used to qualitatively analyse facial asymmetry and the asymmetry degree is more influenced by enlarging the ramus height, mandibular body length than those of gonial angle.

• Imaging Science in Dentistry
• /
• v.31 no.1
• /
• pp.35-42
• /
• 2001

Purpose: To evaluate the usefulness of fractal analysis for diagnosis of periodontitis. Materials and Methods : Each 30 cases of periapical films of male mandibular molar were selected in normal group and patient group which had complete furcation involvement. They were digitized at 300 dpi, 256 gray levels and saved with gif format. Rectangular ROIs (10×20 pixel) were selected at furcation, interdental crest, and interdental middle 1/3 area. Fractal dimensions were calculated three times at each area by mass radius method and were determined using a mean of three measurements. We compared fractal dimensions at furcation and interdental crest area of normal group with those of patient group. And then we compared ratio of fractal dimensions at furcation area, interdental crest area to interdental middle 1/3 area. Results: Fractal dimension at interdental crest area of normal group was 1.979±0.018 and that of patient group 1.971±0.012 (p>0.05). Fractal dimension at furcation area of normal group was 1.986±0.024 and that of patient group 1.974±0.015 (p<0.05). The ratio of fractal dimension at interdental crest area to interdental middle 1/3 of normal group was 1.003±0.015 and that of patient group 0.993±0.018 (p<0.05). The ratio of fractal dimension at furcation area to interdental middle 1/3 of normal group was 1.006±0.018 and that of patient group 0.994±0.018 (p<0.05). Conclusion : The ratio of fractal dimension at interdental crest and furcation area to interdental middle 1/3 area showed a statistically significant difference between normal and patient group. In conclusion, it is thought that fractal analysis might be useful for the diagnosis of periodontitis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.13
• /
• pp.5573-5578
• /
• 2015

Background: A systematic review and meta-analysis were performed to compare the post-recurrence survival with hepatic re-resection versus transarterial chemoembolization (TACE) for recurrent hepatocellular carcinoma (HCC) after initial resection. Materials and Methods: All relevant papers were searched via PubMed, EMBASE, and Cochrane Library databases. Hazard ratios (HRs) with 95% confidence intervals (CIs) were pooled using a random-effects model. Subgroup analysis was performed according to country. Sensitivity analysis was performed in studies which clearly reported the recurrent regions, in moderate/high-quality studies, in studies published in full-text form, and in studies published after 2005. Results: In total, twelve papers were included in our study. Five and seven of them were of moderate- and poor-quality, respectively. The overall meta-analysis demonstrated a statistically significantly higher post-recurrence survival in the hepatic re-resection group than in those undergoing TACE (HR=0.64, 95%CI=0.52-0.79, P<0.0001). Heterogeneity was statistically significant and statistical significance remained in the subgroup analysis. Sensitivity analyses were also consistent with the overall analysis. Conclusions: Hepatic re-resection might provide a better post-recurrence survival than TACE for recurrent HCC after initial resection. However, considering the low quality of published studies and the potential bias of treatment selection, further randomized trials should be warranted to confirm these findings.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.3
• /
• pp.117-128
• /
• 2003

The purpose of this study is to analyze the characteristics of the landscape type on Chunchon by CG(computer graphics) pictures and visibility analysis. The land use CG picture and the land cover CG picture are created by using Zoning area data and DEM(digital elevation model), and by using data of land cover classification and DEM. According to the analysis result of the land cover from 1989 to 2000, the city area has increased to $7.7km^2$, the green area has diminished to $12.7km^2$. The tendency of the city area increases and the green area decreases which appear in the city area, developmental restriction zone and green area on land use. The landscape is classified into three types by cluster analysis using the area rate of the element which constitutes the land use CG picture. Type 1 is a landscape characteristics of developmental restriction zone. Type 2 is a landscape characteristics of green land and type 3 is a landscape characteristics based on city area and water area. The increase of city area and decrease of green area are shown in all landscape types of land cover CG pictures. The same tendency is seen in the place where the scenery is of high importance as a result of visible analysis. The preservation and management of the scenery to the green area are requird in developmental restriction zone are required.