• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.193-198
• /
• 2017

Recently, as interest in health increases, various wearable devices such as smart watch and smart band which can measure user's biometric information are being studied. Conventional wearable devices service the measured biometric information in a form that provides simple monitoring, disease prevention, and exercise amount. However, the user is Lack to deal with the dangerous situation. In this paper, we propose a hazard notification system to address these problems. The biometric information measured by the acceleration sensor and the heart rate sensor is transmitted to the application through the Arduino in real time. It identifies the risk situation through sensor priority measurement and risk situation identification algorithm. If a dangerous situation occurs, a notification message is sent to the guardian indicating the current location of the user. Therefore, it can be expected that if a dangerous situation occurs to a user who needs protection, he can respond promptly.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1017-1022
• /
• 2018

In this paper, a single house fire alarm device, which can solve the problem of fire perception at midnight time and the attenuation of alarm signal due to the wall between rooms based on the wireless communication, was developed. The radio controlled fire alarm device was designed to allow fire to be recognized quickly and accurately by monitoring the temperature and $CO_2$ concentration based on the temperature sensor and gas sensor, by detecting the fire in the house and by transmitting the fire alarm to the individual wireless alarms of other rooms using the wireless transmission/reception module. Using the Arduino as a main control device, three independent fire alarm device prototypes were made, and their usefulness was verified by the correct operations in temperature and gas tests.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.25-27
• /
• 2022

Recently, with the development of the 4th industry, environmental issues such as air pollution have become serious, and in particular, a lot of air pollutants are generated in industrial sites. There are various types of air pollutants, and among them, carbon monoxide is essential for fires occurring in industrial sites, so it should be possible to monitor in real time. In addition, there is a need for a remote monitoring system that can measure various environmental factors other than air pollutants in real time. In this paper, we propose a monitoring system using wireless communication to remotely measure the industrial environment. The proposed monitoring system collects data to the Arduino of the transmitter by using a carbon monoxide sensor, a combustible gas sensor, a temperature and humidity sensor, and a flame sensor, and then transmits it to the receiver using ZigBee. The transmitted data is stored in the database of the receiver Raspberry Pi, and the stored data can be monitored in real time through the monitoring system.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.8
• /
• pp.327-342
• /
• 2017

In this paper, we introduce an integrated processing system of smart sensor data for IoT service which collects sensor data and efficiently processes it. Based on the technology of collecting sensor data to the development of the IoT field and sending it to the network · Based on the receiving technology, as various projects such as smart homes, autonomous running vehicles progress, the sensor data is processed and effectively An autonomous control system to utilize has been a problem. However, since the data type of the sensor for monitoring the autonomous control system varies according to the domain, a sensor data integration processing system applying the autonomous control system to various different domains is necessary. Therefore, in this paper, we introduce the Smart Sensor Data Integrated Processing System, apply it and use the window as a reference to process internal and external sensor data 1) receiveData, 2) parseData, 3) addToDatabase 3 With the process of the stage, we provide and implement the automatic window opening / closing system "Smart Window" which ventilates to create a comfortable indoor environment by autonomous control system. As a result, standby information is collected and monitored, and machine learning for performing statistical analysis and better autonomous control based on the stored data is made possible.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.13-17
• /
• 2024

A color sensor is an optical sensor used to take pictures of objects, including the human body, and reproduce them on a monitor. A color sensor quantifies the red, green, and blue light coming from an object and expresses it as a digital number, and can judge the state of the object by comparing the values ​​or the ratio.In this study, the standard colors displayed on the monitor were measured using a color sensor, and the magnitudes of the red, green, and blue components, or RGB values, were compared with the values ​​indicated by the computer. When measured with the TCS 34725 color sensor, even when the light generated by the computer consists of only one or two of red, green, and blue light, the color sensor detected all three components. Additionally, when the colors of two monitors with the same RGB values ​​were measured using a color sensor, different RGB values ​​were measured. These results can be attributed to the imperfection of the color filters used to express colors on the monitor and the imperfect optical characteristics of the photodiodes used in the color sensor. When photographing an object and judging its condition based on its color, you must use the same type of camera or smartphone.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.226-232
• /
• 2016

The research for the improvement in math and science scores is active by the brain exercises, stress reliefs, and emotion sensitized illuminations. This principle is based on the following facts that the most effective brain turns are supported with the circumstances not only when the brain wave should keep stability and comfort in science criticism, but also when minimized stress and comfortable illumination should be adjusted in solving math problem. In this paper, in order to effectively learn mathematics and science, the most optimized simulating tests in learning conditions are conducted by using a stress relief. However, depending on the users' tastes, the effectiveness on favorite music or colors therapy have no convergency but many differentiations. Therefore, in this paper, in order to solve this problem, the proposed optimal illumination and music therapy treatment using fuzzy inference method.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.193-199
• /
• 2015

Recently the artificial intelligence green house system, which collects automatically the informations of plants cultivation circumstances and controls the growing circumstances, is studied using temperature, humidity and illuminance sensors. In this paper, the inference for plants cultivation of optimum circumstance conditions is simulated on the internet bases by predicting the temperature, humidity and illuminance. On the IOT circumstances, the plant cultivation conditions of temperature, humidity and illuminance, using Arduino sensor, are transmitted to the manager on realtime and if the optimum condition of temperature and humidity for plant cultivation is not equal to the values, the system transmits automatically the SMS warning messages on realtime. Although the sudden climite conditions(snow, rain, hot weather) are occurred, the optimum condition of plant cultivation can be controlled. In this paper, using Fuzzy rules and WEKA TOOL, although the same flora temperature zone is used, the simulation is produced for the optimum value of temperature, humidity and illuminance for the zone.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.157-163
• /
• 2020

Recently, fine dust has been known to cause cardiovascular diseases here, raising interest in ways to reduce emissions by efficiently using fuel from cars that cause air pollution. Accordingly, a driving assistance system was developed to save fuel by eco-driving and improve the driver's bad driving habits. The system was developed using raspberry pi, arduino and Android. Using RPM, speed, fuel injection information obtained from OBD-II, and gyro-sensor values, Fuel-Cut is induced to create an optimal inertial driving environment. It also provides various information system such as weather, driving environment, and preventing drowsy driving through GUI and voice recognition functions. It is possible to check driving records and vehicle fault information using Android application and has low overhead for message transmission using MQTT protocol optimized for IoT environment.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.10
• /
• pp.1325-1330
• /
• 2020

New-born babies who require special attention medically are admitted often to incubator. Incubators are well equipped to fulfill take care of infants, but they have to hospital and so expensive. This paper proposes a smart incubator that can solve the problem of convenience and cost aspect of these incubators. Developed incubator enables near-field monitoring using Arduino Uno as the main control device and Bluetooth communication. The environment in the incubator measures temperature and humidity using a DHT22 sensor and the sound using a P5510 microphone. If the temperature and humidity data set by the user are lower or higher than the reference value, it is designed to operate the heating pad using the controller or turn on the fan to allow air circulation. The measured values in the incubator are displayed in real time on the user's smartphone monitoring screen and are programmed using app inventor. Developed incubators can help take care of infants at low cost in the home.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.69-74
• /
• 2022

Even after the drunk driving law was revised through the Yoon Chang-ho Act in 2019, the proportion of habitual offenders among all drunk drivers in 2021 was 4.7%, up 0.5% from 2018. In addition, drunk driving is not easily stopped due to the addiction of alcohol, and there is a high probability of recidivism in accidents as it is often driven again. Therefore, in this paper, to prevent this, when alcohol is measured using its own sensor rather than a manual police measure, the vehicle stops and related data such as the current location and time are automatically saved. Since it is not possible to develop directly on the car, this system was developed by converging various technologies and sensors such as Arduino board, Firebase, and GPS based on the IoT environment in consideration of the simulation environment.