• 한국공간구조학회논문집
• /
• 제15권4호
• /
• pp.81-89
• /
• 2015

Damped outrigger systems have been proposed as a novel energy dissipation system to protect tall buildings from severe earthquakes and strong wind loads. In this study, semi-active damping devices such as magnetorheological (MR) dampers instead of passive dampers are installed vertically between the outrigger and perimeter columns to achieve large and adaptable energy dissipation. Control performance of semi-active outrigger damper system mainly depends on the control algorithm. Fuzzy logic control algorithm was used to generate command voltage sent to MR damper. Genetic algorithm was used to optimize the fuzzy logic controller. An artificial earthquake load was generated for numerical simulation. A simplified numerical model of damped outrigger system was developed. Based on numerical analyses, it has been shown that the semi-active damped outrigger system can effectively reduce both displacement and acceleration responses of the tall building in comparison with a passive outrigger damper system.

• 복합신소재구조학회 논문집
• /
• 제1권4호
• /
• pp.6-12
• /
• 2010

This study investigates how to apply composite material to the blast loading protection devices, mainly used for military purpose. Traditionally, earth-filled blast walls have been used for protecting important parts of military facilities and personnels. However these types of blast walls show difficulty in fabrication and portability because of their nature of heavy weight. Composite materials are known to have relatively higher specific stiffness and strength than any other metallic and earth-filled materials such as sand and gravels. Totally 4 times of TNT blast experiments were performed on the carbon/epoxy blast walls. After the end of each test, the improvement of blast wall was implemented to the structure. The test results show that the use of composite material in the blast protecting area is the one of very effective and reliable alternatives.

• Wind and Structures
• /
• 제30권4호
• /
• pp.423-432
• /
• 2020

A steel high-rise building (HRB) with 15 stories was analyzed under the dynamic load of wind or four different earthquakes taking into consideration the effect of soil-structure interaction (SSI) and using tuned mass damper (TMD) devices to resist these types of dynamic loads. The behavior of the steel HRB as a lightweight structure subjected to dynamic loads is critical especially for wind load with effect maximum at the top of the building and reduced until the base of the building, while on the contrary for seismic load with effect maximum at the base and reduced until the top of the building. The TMDs as a successful passive resistance method against the effect of wind or earthquakes is used to mitigate their effects on the steel high-rise building. Lateral displacements, top accelerations and straining actions were computed to judge the effectiveness of the TMDs on the response of the steel HRB subjected to wind or earthquakes.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.45-51
• /
• 2005

Appling natural light to the spaces for the exhibition requires the compromises between the expectations of visitors whom are preferable to perceive the details of the works of art, and preservation of light sensitive artworks of least exposure to light. To solve the compromises, it requires a careful planing to control the penetration of the daylight by physical and mechanical devices such as diffusive glasses and blinds. The control of light penetration can also be achieved by providing spaces inside and outside of the building. The aim of this study is suggest the conceptual methods to control the daylight by space design. Museums and galleries using daylight were investigated how the daylight is controlled by the integrated spaces in the exhibition spaces. This study presents nine ways of controlling daylight penetration by space design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.764-767
• /
• 1996

Design & operation of power system for meeting increase of electric power demands is becoming more difficult and complex. One of reasons is increase of fault current. As one of the most effective methods for suppressing the fault currents, installation of SFCL are expected. An image of future hybrid & total SC power system which have introduced SC generator cable transformer, fault current limiter, SMES & shunt reactor, etc. are presented. In the SC power system, it is pointed that a SFCL should play an, important part of quenching current level coordination to prevent the other SC devices from quench.

• Journal of information and communication convergence engineering
• /
• 제11권2호
• /
• pp.112-117
• /
• 2013

In order to reuse a register transfer level (RTL)-based IP block, it takes another architectural exploration in which the RTL will be put, and it also takes virtual platforms to develop the driver and applications software. Due to the increasing demands of new technology, the hardware and software complexity of organizing embedded systems is growing rapidly. Accordingly, the traditional design methodology cannot stand up forever to designing complex devices. In this paper, I introduce an electronic system level (ESL)-based approach to designing complex hardware with a derivative of SystemVerilog. I adopted the concept of reuse with higher levels of abstraction of the ESL language than traditional HDLs to design multiplication server farms. Using the concept of ESL, I successfully implemented server farms as well as a test bench in one simulation environment. It would have cost a number of Verilog/C simulations if I had followed the traditional way, which would have required much more time and effort.

• 한국컴퓨터정보학회논문지
• /
• 제24권1호
• /
• pp.159-166
• /
• 2019

Recently, the advanced development of smart devices has increased the interest in health-care, and many people are paying more attentions to disease prevention than disease treatment. Among these prevention methods, the bare body movement has received much attention, and especially walking exercise is attracting much attention because it is enjoyable without any restrictions on place and time. Walking exercise is generally divided into two types: walking on the ground and climbing the stairs. Walking up the stairs consumes much more calories compared to walking on the ground. These walking exercises have the advantage that they can be easily performed by male and female without special equipments or economic considerations. However, there is a lack of applications and systems that accurately determine such walking and stair walking and measure momentum according to stair walking. In this paper, we designed and implemented a real-time walking status analysis system using smartwatch's, pedometer, smartphone's barometer and beacons.

• 정보보호학회논문지
• /
• 제17권2호
• /
• pp.61-72
• /
• 2007

With the increasing growth of Internet and wireless IP networks, Multimedia systems need to be envisaged as information resources where users can access anywhere and anytime. However, efficient services in these multimedia systems are open and challenging research problem due to user mobility, limited resources in wireless devices and expensive radio bandwidth. To implement multimedia services over heterogeneous network, the IP header compression scheme can be used for saving bandwidth. In this paper, we present an efficient solution for header compression, which is modified form of ECRTP. It shows an architectural framework adopting modified ECRTP when IP tunneling network using GRE over IPSec is implemented. We have conducted simulations in order to analyze the effects of different header compression techniques while delivering real-time services to the wireless access network through secured IP Network. The impacts on performance have been investigated through a series of experiments.

• Communications for Statistical Applications and Methods
• /
• 제29권2호
• /
• pp.161-176
• /
• 2022

There has been active research in image classification using deep learning convolutional neural network (CNN) models. ImageNet large-scale visual recognition challenge (ILSVRC) (2010-2017) was one of the most important competitions that boosted the development of efficient deep learning algorithms. This paper introduces and compares six monumental models that achieved high prediction accuracy in ILSVRC. First, we provide a review of the models to illustrate their unique structure and characteristics of the models. We then compare those models under a unified framework. For this reason, additional devices that are not crucial to the structure are excluded. Four popular data sets with different characteristics are then considered to measure the prediction accuracy. By investigating the characteristics of the data sets and the models being compared, we provide some insight into the architectural features of the models.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.521-524
• /
• 2013

Schedule management of construction work is important in order to complete construction projects within a given period of time. Many efforts have been made and many tools have been developed in order to manage construction projects by a smart device such as smart phones and smart pads. This research proposed a basic design to manage construction schedules via a smart device using Flash. The interactive and graphic property of Flash enables a field manager to manage schedules easily and efficiently. A basic structure was designed for a user to be able to make and change a schedule by touching the smart device's screen. And a prototype was implemented by Adobe Flash/Flex Builder, it is applied to a sample network in a smart phone.