• Korean Journal of Construction Engineering and Management
• /
• v.15 no.5
• /
• pp.115-126
• /
• 2014

Although various IT-based services including PMIS are used at construction field, there have been limits on communications, such as fast reaction, information loss, and information security in the real world. Therefore, this paper proposes to adapt a social network service (SNS) that has already been used for information management and sharing information at the company level in other industries in order to support construction information management and communication in a fast and accurate manner. Following the requirement analysis through literature review and site interviews, the paper presents an SNS-based construction information communication and sharing system named PMIS+. PMIS+ was tested and validated for its feasibility at construction sites and it was proved that the proposed system and information management framework using the system could be helpful for effective information management at construction fields.

• Journal of the Korean Institute of Rural Architecture
• /
• v.15 no.1
• /
• pp.1-11
• /
• 2013

The Gongju Sanseong Traditional Market, the subject of this study, was formed in the early 1900's, and along with the development of Gongju, it has been constantly changed and expanded up until now. The Sanseong Traditional Market located in Gongju, the Korea's representative historic city, exhibits merits in the aspects as a city based on the symbolic significance of the city where it is located and historical characteristics; however, it also presents some problems as well in consideration of user convenience and accessibility. Thereupon, this study conducted literature review on traditional markets, field research with a field trip, and a survey in order to analyze the spatial characteristics of the market environment and grope for the methods of activation. The conclusion suggested through this is as written below: First, the changes of types regarding spatial use according to the modernization project of traditional markets are essential, so about the spatial use according to the spatial changes, it is needed to distribute it balancedly considering the central space of the market. Second, with the understanding of the spatial types of traditional markets, it is needed to build a plan for alternation in the types of physical space based on that. Third, it is necessary to suggest the methods of integrated spatial use among standing markets and 5-day markets. In particular, through the approaches from the aspects of architectural and urban design and through reasonable spatial planning, a systematic approach considering the convenience of the users and merchants using it as their living space should be prioritized. And lastly, it is needed to reorganize the space according to the physical and non-physical methods in order to figure out the methods of activating traditional markets in agricultural areas and minor cities. With the complex approaches above, we can grope for the methods of activating traditional markets.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.2
• /
• pp.63-72
• /
• 2017

Purpose: The purpose of this study is to review the material handling system of the Airborne Infection Isolation Hospitals which is the one of the key elements of infection control and to improve the basic data for the planning and design of those facilities. Methods: Research was conducted by literature reviews and case studies for the material handling system of domestic and foreign Isolation hospitals. Results: The result of this study can be summarized into three points. First, a general isolation unit and a high level isolated unit need to be distinguished in terms of efficiency and safety. In particular, it is desirable that a high level isolated unit have to completely separate clean and soiled circulations, and soiled corridor should be installed by those means. By doing this, the medical staff can observe patient rooms and supply clean materials directly in the clean zone without wearing PPE, so that safety and work efficiency can be improved at the same time. Second, for the safe disposal of wastes, it is desirable to install a dedicated sterilizer per ward and sterilize it at least in the ward. In addition, It is desirable to install a central waste treatment room and a dedicated soiled corridor in consideration of the inadequate handling capacity and emergency situation. Third, the characteristics of material flow chart in the negative pressured isolation hospitals and the corresponding material handling system have been presented. Implications: Infection control is very important in safety, but it is necessary to respond to the symptoms of the patient.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.23-30
• /
• 2018

Recently, there are highly interests on structural damping to improve resistance of seismic and wind. It has been frequently used hysteresis damping devices made of steel because of economic efficiency, construction, and maintenance. This paper presents the effective reduction of seismic response by using Kagome damping system(SKDS) in rahmen system apartment building. The proposed system is designed to be activated by the relative displacement between the building and the stairs. It is performed nonlinear dynamic analysis to review the effects of earthquake response reduction for the 20-stories rahmen framed apartment building. In the analysis of the SKDS system, the reduction of maximum response displacement, maximum response acceleration and layer shear force are compared with the seismic design, and the result show that allowable story displacement is satisfied with Korean Building Code (KBC 2016).

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.4
• /
• pp.257-267
• /
• 2007

Bandwidth Trading(BT) represents a potential market with over 1 trillion USD across the world and high growth potential. BT is also likely to accelerate globalization of the telecommunications industry and massive restructuring driven by unbundling rush. However, systematic researches on BT remain at an infant stage. This study starts with structure analysis of the Internet industry, and discusses significance of Internet interconnection with respect to BT issues. We also describe the bandwidth commoditization trends and review technical requirements for effective Internet interconnection with BT capability. Taking a step further, this study explores the possibility of improving efficiency of network providers and increasing user convenience by developing an architectural prototype of Hub-&-Spoke interconnection model required to facilitate BT. The BT market provides an innovative base to ease rigidity of two-party contract and increase service efficiency. However, as fair, efficient operation by third party is required, this research finally proposes an exchanging hub named NIBX(New Internet Business eXchange).

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.13-21
• /
• 2019

The purpose of this study is to suggest an Improvement Model of defect information management system. The improvement model adapts methods for the residents to input defect information correctly and share to defect information with construction company. The adapted research method is review for existing defect information management system and suggested for data flow diagram of improvement model. The results of this study are as follows: The basic design of the information input window of the defect information management system for connecting with big data was made. And 5 point scale was applied to evaluate the convenience, simplicity, accuracy, necessity, and usability of the improvement model. It is evaluated that the economic effect caused by using the improvement model is saved by about 151 million KRW compared to the existing method. The Improvement model is used utilize big data in correct defect management and decision making.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.6
• /
• pp.626-648
• /
• 2021

Domestically, demands for multi-purpose performance venues which accommodate various performance genres have increased. However, those venues have limited capability and confined to a primary performance. The present work investigated various methods for controlling the acoustics of room for required performance genres by reviewing aurally presented and published materials. The method of varying the acoustics of a space is called Variable Acoustics, and adjusted in either passive and active ways. Passive control encompasses variable absorption, variable volume, coupled volume, and canopy reflectors, where the acoustics of a room is controlled in an architectural way. Active control includes In-line, Regenerative, and Hybrid systems where the acoustics of a room is manipulated electronically. The mechanism and application of each passive control system in existing venues are reviewed and their pros and cons are discussed. Also, the concept of each active systems and product applications are looked at through literature reviews. Lastly, some considerations that need to be taken into in the planning and design stage of a multi-purpose hall using Variable Acoustics are suggested.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.98-106
• /
• 2015

VE aims at reduction in a budget, improvement of function, structural safety and quality security for public construction projects. However, there is possibility for the structural safety and quality security review to be insufficient because related regulations are mostly composed of analysis on economic efficiency of design. In addition, due to the misconception about VE as a cost saving methodology, an alternative is being presented which still focuses mainly on cost saving, but with no objective evaluation of function related to cost. In order to improve this, the government adopted the reduction of life cycle cost and proposal of value improvement, and let people specify the cost and function of the original plan versus the alternative plan, and the value changes between them. However, it is written mainly into practical convenience rather than theoretical basis since a specific way is not suggested. The current method sets a different starting point by applying the attributional difference of function and cost. Furthermore, an evaluation standard for correlating is an important element in rational decision making for assessing and choosing an alternative. This paper analyzes the process and method of function & cost scoring when performing VE and suggests a mathematical normalization model in order to support rational decision making when selecting an optimum plan.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.1
• /
• pp.24-31
• /
• 2024

Mortar has been applied in most previous studies on 3D concrete printing. In such cases, however, the economic efficient cannot help decreasing due to higher binder contents and larger amount of fine aggregates. In order to enhance the applicability of 3D printing technology to construction industry, therefore, 3D concrete printing technology utilizing coarse aggregates needs to be developed further. This study aims at proposing the mix design process of concrete containing coarse aggregates for 3D printing. Based on extensive literature review and experimental studies, the mix proportion suitable for 3D printing has been derived, and the extrudability of concrete with coarse aggregates has been verified through 3D printing tests. The primary variable of the extrudability tests was the contents of viscosity modifying agent (VMA), and the extrudability was quantitatively evaluated by measuring dimensions, distribution of aggregates, and surface quality of 3D-printed filaments. The test results showed that the dimensional suitability and surface quality were improved as the VMA contents were larger, and the coarse aggregates were evenly distributed in the section of filament regardless of the VMA contents. Based on the test results, the mix design process for concrete containing coarse aggregates for 3D printing has been proposed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.44-52
• /
• 2002

Low temperature thermal desorption (LTTD) has become one of the cornerstone technologies used for the treatment of contaminated soils and sediments in the United States. LTTD technology was first used in the mid-1980s for soil treatment on sites managed under the Comprehensive Environmental Respones, Compensation and Liability Act (CERCLA) or Superfund. Implementation was facilitated by CERCLA regulations that require only that spplicable regulations shall be met thus avoiding the need for protracted and expensive permit applications for thermal treatment equipment. The initial equipment designs used typically came from technology transfer sources. Asphalt manufacturing plants were converted to direct-fired LTTD systems, and conventional calciners were adapted for use as indirect-fired LTTD systems. Other innovative designs included hot sand recycle technology (initially developed for synfuels production from tar sand and oil shale), recycle sweep gas, travelling belts and batch-charged vacuum chambers, among others. These systems were used to treat soil contaminated with total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), pesticides, polychlorinated biphenyls (PCBs) and dioxin with varying degrees of success. Ultimately, performance and cost considerations established the suite of systems that are used for LTTD soil treatment applications today. This paper briefly reviews the develpoment of LTTD systems and summarizes the design, performance and cost characteristics of the equipment in use today. Designs reviewed include continuous feed direct-fired and indirect-fired equipment, batch feed systems and in-situ equipment. Performance is compared in terms of before-and-after contaminant levels in the soil and permissible emissions levels in the stack gas vented to the atmosphere. The review of air emissions standards includes a review of regulations in the U.S. and the European Union (EU). Key cost centers for the mobilization and operation of LTTD equipment are identified and compared for the different types of LTTD systems in use today. A work chart is provided for the selection of the optmum LTTD system for site-specific applications. LTTD technology continues to be a cornerstone technology for soil treatment in the U.S. and elsewhere. Examples of leading-edge LTTD technologies developed in the U.S. that are now being delivered locally in global projects are described.