• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.666-671
• /
• 2000

With the current advances in optical WDM (Wavelength Division Multiplexing) networking technologies and the increasing demand for network bandwidth the Next Generation Internet is expected to be a network that runs IP(Internet Protocol) directly over WDM-based optical networks. The network control architecture for the IP over WDM networks is different from that of traditional Internet since the underlying WDM devices have more constraints than electronic IP routers such as the lack of optical buffers and wavelength continuity property etc. In this paper we introduce several architectural models for implementing IP over WDM networks and propose an integrated network control framework for the IP over WDM networks. This framework leverages the traffic engineering control architecture for the MPLS (Multi-Protocol Label Switching) networks and is mainly developed for the IP over packet-switched WDM networks. We also report several preliminary simulation results of contention resolution schemes in the packet-switched WDM networks.

• Journal of Marine Bioscience and Biotechnology
• /
• v.2 no.1
• /
• pp.23-33
• /
• 2007

The constraints of traditional fish drying in Bangladesh have been reviewed and an effective solar fish dryer was developed with the small-scale processors and fishermen using locally available cheaper materials in order to dry fish in coastal region. After successful field testing, new solar dryer was demonstrated within the community in 3 different locations of Cox's Bazar for several batches of operations in each location from late September to March and found very effective in terms of architectural suitability, operational feasibility, technical efficiency, out-put quality (good texture, colour, flavour and long storage time), user's acceptability, commercial viability and environmental adequacy. A simple cost-profit analysis was done with the community operated products, which indicates that the new solar fish dryers could be operated profitably in coastal regions where sun-light and air flows are abundant.

• KIEAE Journal
• /
• v.2 no.4
• /
• pp.3-10
• /
• 2002

The main purpose of this dissertation is to develop an integrated approach to sustainable housing development, which would be applied in both academic studios and professional practice. This approach is based upon the concept of sustainability encountered in the process of housing design efficiency. It is concerned with the basic identification of problems and needs, the setting of design goals, and the constraints under which the future design and construction will have to operate. The components of the research approach focus on: (1) the identification of main issues of sustainable architecture (2) the identification of the concept of sustainability as integrated approach for architectural design. (3) the analysis of context between the housing design and the main issues of sustainablility. (4) the identification of the concept of sustainable housing design. Based on these results, this paper suggested the concept of sustainable housing design as integrated approach.

• International Journal of Automotive Technology
• /
• v.3 no.2
• /
• pp.79-88
• /
• 2002

Emergent Collision Avoidance Systems (CAS's) are beginning to assist drivers by performing specific tasks and extending the limits of driver's perception. As CAS's evolve from simple systems handling discrete tasks to complex systems managing interrelated driving tasks, the risk of failure from hidden causes greatly increases. The successful implementation of such a complex system depends upon a robust software architecture. Host of the difficulty in implementing system arises from interconnections between the components. The CAS architecture presented in this paper focuses on these interconnections to mitigate this problem. Moreover, by constructing the GAS architecture through the composition of existing architectural styles, the resulting system will exhibit predictable qualities. Some of the qualities represent limitations that translate into constraints on the system. Others are beneficial aspects that satisfy stakeholder requirements .

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.581-584
• /
• 2004

High ductile fiber reinforced mortar suitable for wet-mix shotcreting (sprayable ductile mortar) 10 the fresh state, while maintaining tensile strain-hardening behavior in the hardened state, has been developed based on micromechanics and workability control. In the development concept of sprayable ductile mortar, micromechanics is adopted to properly select the matrix, fiber, and interface properties to exhibit strain hardening and multiple cracking behaviors in the composites. Within the pre-determined micromechanical constraints, the workability is controlled by optimizing mix proportions. A series of spray tests show the excellent pumpability and sprayability of the sprayable ductile mortar. Subsequent direct tensile tests demonstrate that the tensile performance of sprayed mortar is comparable to that of cast mortar, for the same mix design.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.302-309
• /
• 2009

The effectiveness of Building Information Modeling (BIM) tools and processes has been recognized by the industry and owners are beginning to adopt Triple Bottom Line accounting practices, to enhance economic performance and environmental and social performance. However, the widespread and practical application of Green BIM remains largely unrealized. The authors identify that lack of understanding of the applicability of sustainability metrics to BIM design process is a significant barrier to this adoption. Through literature review this paper outlines the various sustainability metrics available to construction and elaborates on the potential of BIM for sustainable design. The paper maps and correlates applicable concepts of sustainability evaluation systems to BIM and describes the constraints in current BIM tools.

• Journal of architectural history
• /
• v.2 no.1 s.3
• /
• pp.25-41
• /
• 1993

This study was made to analyze the housing adjustment phenomenon in the first half of Chosun Dynasty by applying Microsociological approach. By reviewing the housing adjustment theory of Morris and Winter, research model for the period was developed in terms of socioeconomic characteristics, normative housing deficit (=cultural norm-housing condition+family norm), constraints, behavioral propensities, and housing adjustment mechanism with the following results : 1. In the first half of Chosun Dynasty the size of the house, the house site and decorating items were specified by law (cultural norm) according to the social status. Although the law was constraints for the housing phenomenon, it was not applied universally. Frequantly the law was violated by the upper class. By the middle of the Dynasty the family norm became more important for the housing phenomenon than the cultural norm. 2. Efforts were made to practice the Confucianism as a cultural norm in the first half of Chosun Dynasty At that time Husband-Living-in-Wife's-House was more popular than Wife-Living-in-Husband's-House. Because the customs were against the Confucianism, the latter was encouraged by law. But it did not change. Instead a compromised system became popular in the middle of the Dynasty. The house shrine was practiced to increase the symbolism of the family, which, in turn, exerted influences in deciding the housing site (cultural norm). These cultural norm was not accepted as the family norm untill the second half of the Dynasty. These trends forced the man and woman use separate areas of the house, and formulated a hierarchic positions within a house. 3. It was shown that the settlement of Confucianism as a family norm was closely related to the popularization of the Ondol system in the house, which functioned as one of the behavioral propensities to encourage diversity of space for many purposes. Though the Ondol system was accepted as a useful heating system earlier, this became more popular in the middle of the Dynasty because the housing pattern with Ondol fitted very well with a large family system with patriarchism. Ondol system for one or two rooms substituted Ondol for all rooms in the second half of the Dynasty. 4. From the beginning of the Dynasty housing adjustment of the family was determined by the social status and by law (cultural norm). Within this cultural norm each family decided its adjustment mechanism according to its economic ability (family norm). Family norm was more important factor than the cultural norm to determine the micro-space pattern in the house. But this period witnessed the formations of new conditions by the ruling class's efforts to implement new ethics for hierarchy and sexual discrimination. According to these conditions the Confucianism overruled the family norm in the later period.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.607-618
• /
• 2023

Pervasive research underscores the direct correlation between an enhanced safety climate and a marked reduction in accidents. The intricacies of safety climate are governed by three pivotal strata: organizational management, on-site operations, and the broader enterprise framework. Within an organizational context, sustaining optimal performance across these layers poses a considerable challenge, often attributable to the constraints of available managerial bandwidth. It becomes imperative, then, to conceive a phased enhancement blueprint for the safety climate. To orchestrate this blueprint with precision, a discerning understanding of the hierarchy of safety climate metrics is essential, which subsequently guides judicious managerial resource allocation. This investigation is anchored in elucidating the hierarchical significance of safety climate metrics through the Analytical Hierarchy Process(AHP). Implementing the AHP framework, both a questionnaire was disseminated and a subsequent analysis undertaken, culminating in the extraction of relative priorities of safety climate determinants. Consequent to this analysis, "workers' safety prioritization and risk aversion" emerged as the foremost dimension, holding a significance weight of 0.1900. Furthermore, within the detailed elements, "unwavering adherence to safety mandates amidst demanding operational constraints" ranked supreme, manifesting a weight of 0.6663. The findings encapsulated in this study are poised to be foundational in sculpting improvements at an institutional level and devising policies, all with the end goal of fostering an exemplar safety climate within construction arenas.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.46-51
• /
• 2014

The most important process of engineering system optimal design is to identify the relationship between the design variables and system response. In case of the system optimization, Response Surface Method (RSM) is widely used. The optimization process of RSM generates the design space using the typical alternative candidates and finds the optimal design point in the generated design space. By changing the optimal point depending on the configuration of the design space, it is important to generate the design space. Therefor in this study, the design space is generated by using the relationship between design variables and system response based on Neuro-Response Surface Method (NRSM). And I try to construct the framework for optimal shape design based on NRSM that the optimum shape can be predicted using the Non-dominated Sorting Genetic Algorithm-II (NSGA-II) within the generated design space. In order to verify the usefulness of the constructed framework, we applied the nonlinear mathematical function problem. In this study, we can solve the constraints of time in the optimization process for the engineering problem and effective to determine the optimal design was possible. by using the generated framework for optimal shape design based on NRSM. In the future research, we try to apply the optimization problem for Naval Architectural & Ocean Engineering based on the results of this study.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.337-344
• /
• 2016

In this study, a form-finding method of tensegrity systems by using the force density method combined with the stiffness matrix method was presented. Numerous studies have been made on form-finding methods of the tensegrity systems. However, these methods are limited in the tensegrity systems with multiple null space of the equilibrium matrix. The proposed method can uniquely define a single integral feasible set of force densities for the structures. In order to draw maximum natural frequency that can lead a maximum stiffness of the tensegrity systems, a constrained maximization problem is formulated in the genetic algorithm. Several numerical examples are presented to prove dfficiency in searching for self-equilibrium congifurations of tensegrity systems with multiple self-stress states. A good performance of the proposed method has been shown in the results.