• 터널과지하공간
• /
• 제14권5호
• /
• pp.345-352
• /
• 2004

숏크리트 지보 구조는 지반과 숏크리트가 일체화되어 숏크리트 라이닝에 전단력의 전달이 가능한 터널구조로서 안정한 구조물을 형성하는데 기여한다. 본 연구에서는 석고를 사용하여 일정한 강도를 가진 균질한 모형지반을 제작하였다. 하중재하에 의해 일정한 원지반 응력을 조성한 후 상$.$하부반단면 굴착공법으로 굴착하며 굴착시 터널 주변지반의 응력상태와 라이닝의 거동특성을 계측하였다. 측정결과 굴착으로 인하여 터널 주변지반과 라이닝에 접선방향으로 인장응력이 발생되었다. 단계굴착에 의한 응력 해방율은 상부 경계선 확대천공시 9%, 상부반단면 아치부 확대천공시 15%, 상부반단면 경계선 절단 즉시 48%, 안정화 후 하부반단면 굴착전 94%로 나타났다.

• 대한소아치과학회지
• /
• 제41권1호
• /
• pp.54-63
• /
• 2014

치아 전위는 치아 이소 맹출의 극단적인 형태로, 인접한 두 치아의 위치가 서로 바뀐 상태로 발육하고 맹출하는 치아 위치 이상이다. 상악 견치와 제1소구치의 전위가 가장 흔하게 발견되는데, 이는 다음의 세 가지 방법으로 치료할 수 있다. 첫 번째 방법은 치아를 전위된 상태로 배열하는 것이며, 두 번째 방법은 전위된 두 치아 중 한 치아를 발치하고 교정 치료하는 것이다. 세 번째는, 전위된 치아를 원래의 위치로 되돌려 배열하는 방법이다. 치료 방법을 결정할 때에는 기능, 심미, 지지 치주 조직의 손상 가능성, 치료 기간, 환자의 협조도, 환자의 심미적 요구도를 고려하여야 한다. 본 증례는 견치와 제1소구치 간의 전위가 일어난 환자 세 명의 교정 치료에 관한 것으로, 각기 다른 치료방법을 사용하여 양호한 결과를 얻었기에 이에 보고하는 바이다.

• 대한두개안면성형외과학회지
• /
• 제9권1호
• /
• pp.17-22
• /
• 2008

Purpose: For several decades, open reduction has been a controversial issue in mandibular condyle fracture. The authors have successfully used the open reduction and internal fixation with retromandibular approach and have found it to be satisfactory for mandibular condyle fracture. Methods: A total of 10 patients with mandibular condyle fracture underwent open surgical treatment using retromandibular approach. The incision for the retromandibular approach was carried below the ear lobe and the facial nerve branches were identified. Dissection was continued until the fracture site was exposed and internal fixation was performed with miniplate following intermaxillary fixation. The average period of joint immobilization was 1 weeks and the arch bars were removed in 3 weeks on average. The preoperative and postoperative panoramic view and three-dimensional computed tomography were compared. During the follow up period, we evaluated the presence of malocclusion, chin deviation, trismus, pain, click sound, facial nerve palsy, hypertrophic scar and skin fistula. Results: According to the radiographic findings, the fractured condyle was reducted satisfactorily in all patients without any symptoms of facial palsy. During the follow up period ranged form 6 to 12 months, all clinical symptoms were improved except in one case with chin deviation and malocclusion. Conclusion: Using open reduction and internal fixation of mandibular condyle fracture with retromandibular approach, all results were satisfactory with good functional outcomes and minimal complication. We concluded that the open surgical treatment should be considered as the first choice for mandibular condyle fracture management.

• 한국터널지하공간학회 논문집
• /
• 제18권5호
• /
• pp.377-387
• /
• 2016

최근 비개착공법으로 지하차도 시공시 파이프루프를 형성하기 위해 강관을 지반에 압입한 후 강관자체를 보강하거나 강관과 강관사이를 일체화시켜 시공에 대한 안정성을 보다 증대시키고 있다. 이렇게 일체화된 파이프루프는 지하차도에 작용하는 응력을 감소시킬 것으로 예상이 된다. 이에 본 논문에서는 일체형 파이프루프의 지보효과와 주변의 응력거동을 확인하기 위해 사각형 지하차도 단면과 아치형 지하차도 단면에 대한 축소 실내모형실험을 수행하였다. 실내실험 결과 지하차도에 작용하는 응력과 변형률은 일체형 파이프루프에 의해 감소되는 것으로 나타났으며 파이프루프의 강성이 증대할수록 감소하는 것으로 나타났다. 더 나아가 지하차도 단면설계를 경제적으로 설계할 수 있을 것으로 기대가 된다.

• 건축역사연구
• /
• 제16권3호
• /
• pp.7-20
• /
• 2007

A bridge is a space used as a passage. This space should be functional, solid, and beautiful. Since the beginning of human life, bridge architecture has given importance to function as a connection from one place to another. Stepping stones in the stream were the connections between divided spaces in the agricultural life, the bridge on the entrances of a town was the place for separation, expectation, and communication for people gathering around the community. Southern Chinese provinces such as Zhejiang, Hunan, Yunnan, and Guizhon is famous for it's spectacular scenary, and tribes like the 'Miao' and 'Dong' live in a cooperate community. The 'Dong' tribe is one of the 'Yue' genealogy where the people have settled down in this place in the days of 'Qin Shi Huang(Qin dynasty)'. As the population of the 'Dong' tribe growed, they used a bridge to connect town to town. The scale became larger with additional design, giving splendid achievement to bridge architecture. The 'Fungyu bridge' in Tongdao and 'Chungyang bridge' in Sanjiang are some fine examples. The Fungyu bridge could be defined as a bridge which blocks wind and rain, this has the same function as the lounge bridge in Taishun located in southern Zhejiang province. In Taishun, 5 minority races such as the 'Dong' and 'Miao' people have been living together as a clan society for centuries on mountains as high as 1000m following their own tradition. The 'Xiliu river' flowing thorough has a variety of bridges remaining in it's original form, and it is recently known as a museum of ancient bridges. The formation of the bridges in Tongdao and Taishun shows that it is different with the arch and straight bridges remaining in Korea. In this study, it is readjusting the base data, showing plan characteristics and describing the construction of the wooden structure above the bridge post.

• 건축역사연구
• /
• 제17권4호
• /
• pp.129-152
• /
• 2008

Early Buddhist rock cave temples of India, in spite of being an origin of Buddhist temples, has little been studied in Korea. After field studies and an interpretation of their forms in conjunction with religious life, precedent theories are supplemented and refuted as follows. Starting from the 2nd century B,C., Buddhist ascetic disciples digged residential rock caves, called vihara, for protection from monsoon rain and hot weather, A typical arrangement was settled -a courtyard type, with 3 side rows of tiny one-person bedroom and a front veranda with columns. Also digged were Chaitya caves, in line with viharas, to worship, which is the tumulus of Buddha's relics. I suggest that the original type of chaitya a simple circle cave with a stupa, suitable for circumambulating ceremonies. I refute the existing theory presenting Barabar caves of Ajivika as a chaitya origin, featuring empty circular room without a stupa. I also interpret a typical apsidal plan as being a simple result of adding a place of worshipping rites in front of the stupa. Enclosing columns around a cylindrical stupa is a result of reinforcing both the divine space and circumambulating ceremonies, with elongation toward hall. Finally the chaitya came to have a grandeur apsidal plan with high vault ceiling nave and a side aisle as in Western cathedrals with large frontal horseshoe arch windows. The Buddha image, which had become a new worshipping object, was integrated into the stupa and interior surface. First the stupa and then the statue was introduced to residential Viharas. Therefore, I suggest that the vihara should be renamed as 'chaitya' as a worshipping place, by establishing statue rooms without bedrooms at all. The functionally changed vihara is similar in form to a 'rectangular type of chaitya', little known and developed in different routes. A columned inner courtyard gradually becama an offering place, like Hindu mandapa, Buddhist caves ware changed to a kind of Tantric and Hindu temple by means of statue worshipping offering rituals.

• 한국발생생물학회지:발생과생식
• /
• 제20권2호
• /
• pp.65-79
• /
• 2016

We observed the osteological development of larval and juvenile red spotted grouper (Epinephelus akaara) in order to generate data for the assessment of skeletal deformities and to inform phylogenetic systematics research. Larvae and juveniles were obtained from a aquafarm in Muan-gun, Jeolla-namdo Province, Korea. The average water temperature at the time of breeding was $23.0^{\circ}C$ and average water salinity was 33.0 psu. Freshly hatched fish larvae had not undergone any ossification, but ossification of the parasphenoid bone, which forms the base of the cranium, occurred as the juveniles reached an average body length (BL) of 2.49 mm. At the same time, ossification of the preopercle and opercle occurred in the operculum, and ossification of the maxilla, which forms the upper jaw, and the dentary bones, which form the lower jaw, began. In addition, ossification of the vertebra occurred by formation of 7 vertebral centra and the neural spine in the abdominal vertebra. When the juveniles reached an average (BL) of 5.22 mm, ossification of the nasal, lateral ethmoid, and alisphenoid bones occurred in the cranium; ossification of the endopterygoid and metapterygoid bones began in the palatine region; and ossification of the hypohyal and interhyal bones occurred in the hyoid arch. At an average (BL) of 20.9 mm, ossification of the basisphenoid bone in the cranium and the suborbital bone in the orbital region occurred. Ossification of the vertebra then occurred by the formation of long pairs of ribs from the third to the ninth abdominal vertebrae, completing osteological development.

• 대한치과보철학회지
• /
• 제33권4호
• /
• pp.705-717
• /
• 1995

In clinical prosthetic dentistry the occlusal planes were represented to the dental arch form sagittally and composed of the occlusion morphologically. From now on the determinations of the occlusal planes were done through the facebow transfer and the cephalometric radiography, but they were not exact method for the diagnosis of the stomagnathic function. The purpose of this study is to examine the sagittal characteristics of occlusal planes using panoramic view between the normal subjects and the subjects with stomatognathic dysfunction. 60 normal subjects and 16 subjects with stomatognathic dysfunction were slectec for this investigation. We measured the inclination of occlusal planes to Frankfurt Horizontal plane. The occlusal planes were divided into 4 groups : 1) The plane between the midpoint of upper central incisor and the mesiobuccal cusp of upper 1st molar, 2) The plane between the midpoint of upper central incisor and the mesiobuccal cusp of upper 2nd molar, 3) The plane between the midpoint of upper central incisor and the distobuccal cusp of upper 2nd molar, 4) The plane between the mesiobuccal cusp of 1st molar and the distobuccal cusp of 2nd molar. The results were as follows : 1) The occlusal planes could be determined very easy by using panoramic view, 2) Among the angles between the occlusal planes and the FH plane, the angles related with the 2nd molar were more steep than those of the 1st molar. The angle between the 1st molar and the 2nd molar is the most steep in the other angles. 3) In the angles between occlusal planes and FH plane, the subjects with stomatognathic dysfunction were more significant steep(p<0.05) than the normal subjects.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.122-129
• /
• 2012

Purpose: Recent mechatronics technology is the most appropriate high technology in agricultural applications to save repetitious labor. Method: Cow's body parameters were measured by several traditional measurers. Image processing technology was used to measure automatically their parameters to reduce labor and time. The parameters were measured form a small model cow which is easily measured, instead to a real cow. The image processing system designed and built for this project was composed of a PC, grabber card, and two cameras, which are located on the side and the top of the model cow. Tests of verification had measured 10 dairy cows. Result: Nine parameters of the model cow's body were measured, and the difference between the real data and the data by image processing was less than 16.7%. Based on the results of the research, the parameters of a real cow had measured of chest depth, withers height, Pelvic arch height, body length, slope body length, chest width, hip width, thurl width, and pin bone width were compared with image processing data. Conclusions: In the Demonstration test, Result had obtained similar data of cow model experiments, and the most of errors were shown less than 5% relatively good result.

• 대한족부족관절학회지
• /
• 제24권3호
• /
• pp.113-119
• /
• 2020

Purpose: A flatfoot that fails to form a longitudinal foot arch is a common lower limb deformity in children. This study evaluated the structural and functional effects of the insole for pediatric flexible flat foot (PFFF). Materials and Methods: Twenty-nine PFFF patients (20 boys and 9 girls, 58 feet) with bilateral symptomatic flatfoot deformities between February 2017 and May 2019 were included in this study. Sixteen patients (32 cases, study group) were treated with a pressured based 3-dimensional printing insole, and 13 patients (26 cases, control group) were followed up regularly without any treatment. Flatfoot was diagnosed by a lateral talo-first metatarsal angle of more than 4° in convex downward and talocalcaneal angles of more than 30° and a calcaneal pitch of less than 20°. The foot pressures, including the midfoot pressure, total foot pressure, and the ratio of the midfoot pressure to the total foot pressure, were evaluated by pedobarography. The clinical scores were assessed using the visual analogue scale (VAS), American Orthopaedic Foot and Ankle Society (AOFAS), and Pediatrics Outcomes Data Collection Instrument (PODCI) scores. Results: The mean age of the study group was 9.16 years, and the mean age of the control group was 7.73 years. The mean follow-up period was 16 months. The change in the lateral talocalcaneal angle was -4.664°±1.239° in the study group and -0.484°±1.513° in the control group. A significant difference in the amount of change of the lateral talocalcaneal angle was observed between the two groups (p=0.034). The midfoot pressures were similar in the two groups. Conclusion: Pressure based customized 3-dimensional printing insole in PFFF may have some effect on the hindfoot bony alignment, but it does not affect the changes in midfoot pressure.