• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 E
• /
• pp.1837-1839
• /
• 1997

This study presents the energy transfer of thermal arc in the circuit breaker with self-generation flow without puffer action. The phenomenon of pressure increase in the cylinder which encloses fixed contact was focused on and rising current stage was considered. Temperature and velocity of arc plasma were calculated by using energy balance equation and the amount of energy transfer due to convective flow was calculated.

• 한국진공학회지
• /
• 제12권1호
• /
• pp.25-34
• /
• 2003

탄소 원자 간의 interaction potential로서 Tersoff에 의해 제안된 반 경험적인 potential을 이용하여 고경질 탄소박막의 합성 거동을 전산 모사하였다. 고에너지의 탄소익사를 diamond (100) 표면에 충돌시켜 고밀도의 비정질 탄소박막을 만들 수 있었으며, 전산모사에 의해 합성된 탄소 박막의 물성과 Shin 등이 발표한 filtered cathodic arc 공정에 의해 합성된 탄소의 물성을 비교하였다. ta-C 합성 실험에서 관찰된 바와 같이 최적의 에너지 영역에서 다이아몬드에 가장 유사한 물성의 필름이 합성되었으며, 이때의 입사원자 에너지인 50 eV 는 실험적으로 최적의 필름이 얻어지는 조건에서의 탄소이온 에너지와 유사하였다. 전산모사에 의해 합성된 박막은 비정질이었으며, 다이아몬드 lattice에 해당하는 short range order를 가지긴 있었다. 그러나, 최적의 에너지 조건에서는 2.1 $\AA$의 거리의 준안정 site에 탄소들이 많이 존재하는 것을 알 수 있었는데, 이는 필름 표면의 국부적 급냉효과가 최대가 되는 조건과 일치하였다. 이러한 결과는 다이아몬드상 카본필름의 합성에 있어서, 고 에너지의 탄소인자가 충돌하면서 발생하는 국소적인 열에너지의 증가가 가장 빨리 제거되는 조건에서 최적의 물성을 가지는 경질탄소 필름이 형성되는 것을 보여주고 있다.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 추계 학술대회 논문집
• /
• pp.32-37
• /
• 2005

The characteristics of the metal melting and radionuclide distribution of the radioactive has been investigated in a lab-scale arc furnace. The slag former based on the constituents of silica, calcium oxide, aluminum oxide, borate and calcium fluoride additions was used for melting of the stainless and carbon steel. In the melting of the stainless steel, the amount of slag formation increased with an increase of the concentration of the slag former. But the effects of the slag basicity on the amount of stag formation showed a local maximum value of the slag formation with an increase of the basicity index in the melting of the stainless steel as well as in the melting of the carbon steel. With an increase of the amount of slag former addition, the trends of the cobalt distribution into the ingot and the stag depended on the kind of slag former used in the melting of the stainless steel while the effect of the slag basicity on the distribution of the cobalt was not clarified in the melting of carbon steel. Tn the melting of the carbon steel, the strontium was captured at up to $50\%$ into the slag phase. Cesium was completely eliminated from the melt of the stainless steel as well as the carbon steel and distributed to the dust phase.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.480-480
• /
• 2010

In the present work, we studied effect of the deposition parameters on the structure and properties of ZnO films deposited by DC arc plasmatron. The varied parameters were gas flow rates, precursor composition, substrate temperature and post-deposition annealing temperature. Vapor of Zinc acetylacetone was used as source materials, oxygen was used as working gas and argon was used as the cathode protective gas and a transport gas for the vapor. The plasmatron power was varied in the range of 700-1,500 watts. Flow rate of the gases and substrate temperature rate were varied in the wide range to optimize the properties of the deposited coatings. After deposition films were annealed in the hydrogen atmosphere in the wide range of temperatures. Structure of coatings was investigated using XRD and SEM. Chemical composition was analyzed using x-ray photo-electron spectroscopy. Sheet conductivity was measured by 4-point probe method. Optical properties of the transparent ZnO-based coatings were studied by the spectroscopy. It was shown that deposition by a DC Arc plasmatron can be used for low-cost production of zinc oxide films with good optical and electrical properties. Sheet resistance of 4 Ohms cm was achieved after the deposition and 30 min annealing in the hydrogen at $350^{\circ}C$. Elevation of the substrate temperature during the deposition process up to $350^{\circ}C$ leads to decreasing of the film's resistance due to rearrangement of the crystalline structure.

• 한국산업보건학회지
• /
• 제10권1호
• /
• pp.32-44
• /
• 2000

The practice of welding stainless steel is known to produce various valance states of chromium. $CO_2$ flux cored arc welding on stainless was performed in fume collection chamber. Content of total chromium and hexavalent chromium in fumes, content of hexavalent chromium in total chromium, solubility of hexavalent chromium were investigated. Content of total chromium in fumes increases from 2~3% to 7~9% as a function of input energy, but hexavalent chromium, less than 1.2% in fumes, is not related to input energy. Hexavalent chromium in fumes exists as solubles up to 90%. Content of total chromium in flux cored arc welding fumes and solubility of hexavalent chromium are similar to shielded metal arc welding fumes, but content of hexavalent chromium is similar to metal inert gas welding fumes. These characteristics are relevant to flux of wires and $CO_2$ shielding gas.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.100-108
• /
• 2006

Time-resolved current and voltage measurements for an inductive automotive spark system were made. Also presented are measurements of the total energy delivered to the spark gap. The measurements were made in air for a range of pressures from 1-18atm, at ambient temperatures. The measured voltage and current characteristics were found to be a function of many ignition parameters; some of these include: spark gap distance, internal resistance of the spark plug and high tension wire, and pressure. The voltages presented were measured either at the top of the spark plug or at the spark gap. The measurements were made at different time resolutions to more accurately resolve the voltage and current behavior throughout the discharge process. This was necessary because the breakdown event occurs on a time scale much shorter than the arc and glow phases. The breakdown, are, and glow voltages were found to be functions of spark plug resistance, gas density, and spark plug gap as expected from the literature. Spark duration was found to decrease as either pressure or gap was increased. The transition from the arc to glow phase is usually distinguished by a sudden rise in the voltage across the gap. At pressures above about 7atm this transition was not observed suggesting that a glow phase was not present. Energy delivered to the gap increased with increasing pressure. The effective resistance of the spark gap during discharge was about twice as large for the glow phase as the arc phase.

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.8-16
• /
• 2023

In this work, we report basic performance test results of a lab-scale three phase alternative current (AC) arc plasma torch system for plasma gas reforming applications. The suggested system primarily consists of three graphite electrodes inclined at 12.5° to the central axis, a 𝞥 150 mm cylindrical gas path and a three phase-60 Hz AC power supply. At air flow rate of 50 Lpm and arc currents of 100-175 A, test results revealed that plasma resistances were decreasing from 1.08 Ω to 0.53 Ω with the increase of plasma power from 9.3 kW to 13.8 kW, causing the decrease of power factor and increase of the line voltages. However, the injected air can be heated quickly up to the temperatures of >1,200℃ when injecting AC arc plasma powers of >10 kW.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.255-256
• /
• 2005

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 추계학술발표회
• /
• pp.197-198
• /
• 2005

• 비파괴검사학회지
• /
• 제25권2호
• /
• pp.87-94
• /
• 2005

최근 램파를 비파괴검사에 이용하고자 하는 연구가 활발히 진행되고 있다. 그 중에서도, 레이저에 의해 집속형 램파를 발생시키는 방법은 비접촉식 검사의 장점과 함께 높은 공간분해능을 기대할 수 있다 이 방법에서 레이저는 원호배열슬릿을 통하여 판재 표면에 조사되는데, 발생된 램파의 에너지가 원호배열의 초점에 집속되는 효과를 갖게 된다. 이 때 공간분해능의 향상은 램파의 집속도를 높임으로써 가능하다. 본 논문에서는 높은 집속도의 램파를 발생시키도록 원호형 슬릿을 설계하기 위해 슬릿의 형상인자와 램파의 집속도 사이의 관계를 분석하였다. 그 결과, 레이저조사반경과 원호각, 원호수를 증가시키거나 원호반경과 파장을 감소시킴으로써 집속도를 높일 수 있다는 것을 알 수 있었으며, 본 연구의 결과는 적절한 원호형 슬릿의 설계기준으로 활용될 수 있을 것으로 기대 된다.