• 한국구조물진단유지관리공학회 논문집
• /
• 제5권2호
• /
• pp.93-102
• /
• 2001

The objective of this experimental study is to evaluate the strengthening effects of concrete compression confined with Epoxy-boned compound fiber sheets. An analytical model is proposed to construct a stress-strain relationship for confined concrete. Test results are summarized as followed. While non-FRP lateral confinement specimens appeared sudden failure after shell concrete was torn off, specimens confined laterally with FRP were showed that their failure. Specially, Glass fiber lateral confined specimens occurred obviously increase ductility ability. Hence, concrete specimen with lateral confinement by Hi-carborn and Aramide. Glass fiber simultaneously can be increased in not only strength but also a lot of ductility ability.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.317-318
• /
• 2007

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.974-979
• /
• 2004

The fluidic muscle cylinder consist of an air bellows tube, flanges and lock nuts. It's features are softness of material and motion, simplicity of structure, low production cost and high power efficiency. In this study, we carried out the finite element modelling and analysis about the main design variables such as contraction ration and force, diameter increment of fluidic muscle cylinder. On the basis of finite element analysis, the prototype of fluidic muscle cylinder was manufactured and tested. Finally, we compared the results between the test and the finite element analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.465-468
• /
• 2004

In this paper, the properties of temperature dependence and voltage dependence of Aramid paper were studied to understand electrical characteristics, to be regarded as the excellent insulation. Aramid paper and pressboard had being applied various motor, generator. We used to Finite Elemental Method of simulation tool, and improved optimal insulating design of insulating Aramid according to calculated those.

• International Journal of Knowledge Content Development & Technology
• /
• 제12권2호
• /
• pp.7-27
• /
• 2022

The study investigated the contributions of digital and media literacies to knowledge sharing among school library personnel in Nigeria. The survey research design was adopted for the study while a questionnaire was used to collect data from the 190 respondents that constitute the sample size for the study. Findings from the study revealed a high level of digital and media literacy skills possessed by the school library personnel surveyed. Producing information, evaluating digital information, and finding digital were major media and digital information literacy skills that significantly contributed to knowledge sharing among the school library personnel. The study recommended that adequate attention should be given to the development of digital and media literacies of school library personnel in Nigeria to ensure effective and efficient knowledge sharing.

• Journal of Ceramic Processing Research
• /
• 제19권6호
• /
• pp.483-491
• /
• 2018

Effects of additives on phase development and physico-mechanical properties of mullite-carbon was investigated. Powdered clay, kaolinite and graphite of predetermined compositions were blended with additives using ball mill for 3 hrs at 60 rev/min. Samples were produced by uniaxial compression and sintered between $1400^{\circ}C$ and $1600^{\circ}C$ for one hr. They were characterized for various properties, developed phases and microstructural features. It was observed that the properties and phase developments in the samples were influenced by the additives. 10 wt % SiC served as nucleating point for SiC around $1400^{\circ}C$. 10wt % $TiO_2$ lead to development of 2.5 wt % TiC at $1500^{\circ}C$ which increased to 6.8 wt % at $1600^{\circ}C$. Ifon clay in the sample leads to development of anorthite and microcline in the samples. 10wt % $TiO_2$ is effective as anti-oxidant for graphite up to $1500^{\circ}C$. Base on strength and absorbed energy, sample C (with 10wt % $TiO_2$) sintered at $1500^{\circ}C$ is considered to be optimum.

• International Journal of Knowledge Content Development & Technology
• /
• 제11권2호
• /
• pp.7-21
• /
• 2021

The study was a descriptive cross-sectional survey which investigated the reading preferences of secondary school students in Nigeria during the lockdown occasioned by COVID-19 pandemic. A hundred secondary school students in Ile- Ife and Ilesa in Osun State, Nigeria were the study respondents. Close ended self-administered questionnaire was used to obtain data. Of the one hundred questionnaire which were applied to the study respondents, ninety-three were retrieved. Data obtained were analyzed using simple frequencies and percentages. The study established that majority of respondents were not pressured to read but read for pleasure. Preference for a wide range of fiction and non-fiction books which was read for purposes ranging from academic, social, relaxation and information was indicated by respondents. Availability of reading materials determined reading preference of majority of respondents as many could not afford to access electronic books whether free or not. The researchers recommended that different types of reading materials that suit the reading preferences and meet the diverse purpose of reading should be provided for the secondary school students during lockdown to improve their reading habits. Public libraries should function during this lock down period within the guidelines of the appropriate health authorities, while school libraries should be equipped to offer virtual services during the lockdown and the students should be exposed to e-books for their reading pleasure.

• 한국응용곤충학회지
• /
• 제48권1호
• /
• pp.109-115
• /
• 2009

무당거미와 나무껍질게거미줄의 열 안정성 및 기계적 성질 등을 측정하고, 그 성질들을 합성 섬유인 아라미드(aramide)와 폴리에스테르(polyester) 등의 측정 결과와 서로 비교하였다. 열 안정성에서 거미줄은 비록 상업용 섬유로 사용되는 아라미드나 폴리에스테르에 비해서는 낮았지만 기계적인 성질에서는 폴리에스테르보다 월등 우수한 결과 값을 보여주었다. 거미줄에 포함되어 있는 수분이 열 안정성과 기계적 성질에 미치는 영향을 조사하기 위해 두 종류의 거미줄을 $100^{\circ}C$의 진공에서 각각 다른 시간 별로 열처리를 하였는데, 1.5시간 동안 열처리를 시킨 후의 열 안정성과 기계적 성질이 최고 값을 나타내었다.