• 대한수학회보
• /
• 제55권3호
• /
• pp.749-762
• /
• 2018

In this paper, the new optimal perturbation iteration method has been applied to solve the generalized regularized long wave equation. Comparing the new analytic approximate solutions with the known exact solutions reveals that the proposed technique is extremely accurate and effective in solving nonlinear wave equations. We also show that,unlike many other methods in literature, this method converges rapidly to exact solutions at lower order of approximations.

• 대한토목학회논문집
• /
• 제37권1호
• /
• pp.83-91
• /
• 2017

말뚝지지 전면기초에서 침하량을 산정할 경우 기초판-말뚝-지반간 상호작용을 고려해야 하며, 단순 해석법으로는 이러한 복잡한 상호작용을 고려하여 해석하는 것이 어렵다. 본 연구에서는 말뚝지지 전면기초의 침하량 해석을 위해 기초판-말뚝-지반간 상호작용을 고려한 근사해석법(HDPR)을 개발하였다. 기초판은 Mindlin 판이론을 이용하여 유한요소로 모델링 하였고, 지반 및 말뚝은 기초판에 연결된 스프링으로 모델링되었다. 지반 스프링의 경우 다층지반을 고려한 선형 스프링을 적용하였고, 말뚝은 비선형 스프링을 적용하였으며, 각각의 스프링은 기초판-말뚝-지반간 상호작용이 반영되었다. 본 연구에서의 해석기법 검증을 위해 3차원 유한요소해석, 기존에 개발된 근사해석방법 및 실제 현장 계측결과와 비교분석을 수행하였다. 그 결과, 개발된 기법이 말뚝 및 기초판의 침하량을 합리적으로 예측하는 것으로 나타났다. 이를 통해 실제 말뚝지지 전면기초 해석 및 설계 시 실용적인 측면에서 적용이 가능함을 확인할 수 있었다.

• Journal of applied mathematics & informatics
• /
• 제38권5_6호
• /
• pp.469-481
• /
• 2020

In this paper, we consider a control system for semilinear differential equations in Hilbert spaces with Lipschitz continuous nonlinear term. Our method is to find the equivalence of approximate controllability for the given semilinear system and the linear system excluded the nonlinear term, which is based on results on regularity for the mild solution and estimates of the fundamental solution.

• 대한기계학회논문집
• /
• 제7권4호
• /
• pp.417-424
• /
• 1983

This paper presents two methods of obtaining approximate analytic solutions for the temperature distributions and heat flow to two-dimensional transient heat conduction problems in a finite strip with constant thermal properties using the Heat Balance Integral. The methods introduced in this study are as follows; one using the Heat Balance Integral only, and the other successively using the Heat Balance Integral and an exact analytic method. Both methods are applicable to a large number of the two-dimensional unsteady conduction problems in finite regions such as extended surfaces with uniform thickness, but in this paper only solutions for the unsteady problems in a finite strip with boundary condition at the base expressed in terms of step function are provided as an illustration. Results obtained by both methods are compared with those by the exact two-dimensional transient analysis. It is found that both approximate methods generate small time solutions, which can not be obtained easily by any exact analytic method for small values of Fourier numbers. In the case of applying the successive use of the Heat Balance Integral and Laplace transforms, the analysis shows good agreement with the exact solutions for any Fourier number in the range of Biot numbers less than 0.5.

• 한국통신학회논문지
• /
• 제25권4A호
• /
• pp.489-495
• /
• 2000

In this paper we propose an approximate method to estimate the cell loss probability(CLP) due to buffer overflow in ATM networks. The main idea is to relate the buffer capacity with the CLP target in explicit formula by using the approximate upper bound for the tail distribution of a queue. The significance of the proposition lies in the fact that we can obtain the expected CLP by using only the source traffic data represented by mean rate and its variance. To that purpose we consider the problem of estimating the cell loss measures form the statistical viewpoint such that the probability of cell loss due to buffer overflow does not exceed a target value. In obtaining the exact solution we use a typical matrix analytic method for GI/D/1B queue where B is the queue size. Finally, in order to investigate the accuracy of the result, we present both the approximate and exact results of the numerical computation and give some discussion.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.403-406
• /
• 2006

PW206C 터보샤프트엔진을 장착한 스마트무인기의 엔진베이 냉각을 목적으로 하는 이젝터를 설계하였다. 이젝터의 기하학적 형상과 유량비의 관계를 근사적 해석식을 사용하여 계산하므로서 이젝터의 형상을 설계하고 성능을 분석하였다. 근사적 해석식의 결과를 검증하기 위해 Fluent 코드를 이용하여 난류 유동해석을 수향하였다. Fluent 코드로 계산한 유량은 근사적 해석식으로 계산한 결과와는 차이를 보였으며, 이것은 이젝터 내부에서 유동의 충분한 혼합이 이루어지지 못하기 때문이다.

• 대한조선학회논문집
• /
• 제55권6호
• /
• pp.527-534
• /
• 2018

The segment of the piston type wave board has been expressed as a submerged vertical line segment in the two dimensional wave flume. Either end of vertical line segment representing wave board could be located in fluid domain from free surface to the bottom of the flume. Naturally the segment could be extended from the bottom to the free surface of the flume. It is assumed that the piston motion of the wave board could be defined by the sinusoidal oscillation in horizontal direction. Simplified analytic solution of the submerged segment of wave board has been derived through the first order perturbation method in water of finite depth. The analytic solution has been utilized in expressing the wave generated by the piston type wave board installed on the upper or lower half of the flume. The wave form derived by the analytic solution have been compared with the wave profile obtained through the CFD calculation for the either of the above cases. It is appeared that the wave length and the wave height are coincided each other between analytic solution and CFD calculation. However the wave form obtained by CFD calculations are more closer to real wave form than those from analytic calculation. It is appeared that the linear solutions could be not only superposed by segment but also integrated by finite elements without limitation. Finally it is proven that the wave generated by the oscillation of flap type wave board could be derived by integrating the wave generated by the sinusoidal motion of the finite segment of the piston type wave board.

• Nuclear Engineering and Technology
• /
• 제16권4호
• /
• pp.202-216
• /
• 1984

Nodal method가 소격격자 해석방법의 하나로 정립됨으로써, 계산격자가 비교적 크더라도 각 격자의 평균출력분포를 정확히 계산할 수 있게 하는 균질화변수틀 찾는 방법이 중요하게 되었다. 본 연구에서는 simplified equivalence theory와 approximate node equivalence theory의 두가지 근사방법을 가압경수형 원자로 문제에 적응하여 시험하여 보았다. 균질화계산과 노심분석계산 방법으로서 analytic nodal method에 기초를 둔 ANM 코드를 개발하였다. 여러 균질화 방법외 정확성을 KTDD 코드에 의한 reference solution과 비교하여 본 결과, 균질화 계산은 핵연료영역에서는 영역별 핵연료집합체 계산으로, baffle과 reflector의 공존 격자영역은 이들을 포함하는 color set 계산으로 수행할 수 있음을 알았다. Approximate node equivalence theory에 입각해서 approximate homogenized cross-section들과 approximate discontinuity factor들의 균질화 변수를 사용하면 출력분포와 임계도가 각각 0.8%, 0,1% 오차 범위내에서 예측되었다.

• 제어로봇시스템학회논문지
• /
• 제18권3호
• /
• pp.175-180
• /
• 2012

A nonlinear navigation filter for biomimetic robot using analytic approximation of mean and covariance of state variable is proposed. The approximations are performed at the time update step in the filter structure. The mean is approximated to the 3rd order of Taylor's series expansion of true mean and the covariance is approximated to the 3rd order either. The famous EKF is a nonlinear filtering method approximating the mean to 1st order and the covariance to the 3rd order. The UKF approximate them to the higher orders by numerical method. The proposed method derived a analytical approximation of them for navigation system and therefore don't need so called sigma point transformation in UKF. The simulation results show that the proposed method can be a good alternative of UKF in the systems which require less computational burden.

• 산업기술연구
• /
• 제21권A호
• /
• pp.33-40
• /
• 2001

Heat loss from the trapezoidal fins haying different upper side slope and that from a rectangular fin are investigated by the three dimensional analytic method. It is shown that the trapezoidal fins having different upper side slope become an approximate rectangular fin by inst adjusting the slope factor. The comparison of the heat loss between a rectangular fin and an approximate rectangular fin is represented as a function of the non-dimensional fin length, fin width and Biot number to make sure that the analysis on the trapezoidal fins having different upper side slope is countable. One of the results is that the relative value of heat loss between a rectangular fin and an approximate rectangular fin is less than 1.5% for given ranges of non-dimensional length and width in case of Bi = 0.1.