• Journal of Korean Society of Disaster and Security
• /
• v.11 no.2
• /
• pp.29-35
• /
• 2018

This study is an experimental comparison on the fact that the sinusoidal load, which has been used so far in the laboratory cyclic test, which is an important part of the liquefaction triggering study, is somewhat different from the phenomenon that causes the soil liquefaction during the earthquake loading. To this end, this study proposes a new type of combined sinusoidal load and compares it with experimental results to load the conventional sine wave. In the comparison, the shaking table tests were carried out and the sample in the tests was remolded with the relative density of 40%, which is a condition where liquefaction is easy to occur. Firstly, the conventional cyclic test was carried out under the condition that with the amplitude of sine wave was 0.3 g. Additionally, 3 types of tests were performed using the combination loads made up with 0.03 g sinusoidal load and 0.3g sinusoidal load. At that time, the loading time for the first sinusoidal load were changed with 5 seconds, 10 seconds, and 15 seconds. As a result, the test with the conventional sine wave and the test with the first sinusoidal loading for 5 seconds showed that the change of the pore water pressure gradually increased. But in the tests with the combined sinusoidal load which changed the first sinusoidal loading time with 10 and 15 seconds, it was found that the pore water pressure suddenly rose at a certain instant and liquefaction occurs. From the experimental comparison, it is judged that it is appropriate that the time of the first sine wave is over 10 seconds at the proposed combined load for the soil condition with relative density 40%.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1299-1310
• /
• 2018

In this study, we analyzed distribution and movement trends using in-situ observations and particle tracking methods to understand the movement of the drift ice in the Arctic Ocean. The in-situ movement data of the drift ice in the Arctic Ocean used ITP (Ice-Tethered Profiler) provided by NOAA (National Oceanic and Atmospheric Administration) from 2009 to 2018, which was analyzed with the location and speed for each year. Particle tracking simulates the movement of the drift ice using daily current and wind data provided by HYCOM (Hybrid Coordinate Ocean Model) and ECMWF (European Centre for Medium-Range Weather Forecasts, 2009-2017). In order to simulate the movement of the drift ice throughout the Arctic Ocean, ITP data, a field observation data, were used as input to calculate the relationship between the current and wind and follow up the Lagrangian particle tracking. Particle tracking simulations were conducted with two experiments taking into account the effects of current and the combined effects of current and wind, most of which were reproduced in the same way as in-situ observations, given the effects of currents and winds. The movement of the drift ice in the Arctic Ocean was reproduced using a wind-imposed equation, which analyzed the movement of the drift ice in a particular year. In 2010, the Arctic Ocean Index (AOI) was a negative year, with particles clearly moving along the Beaufort Gyre, resulting in relatively large movements in Beaufort Sea. On the other hand, in 2017 AOI was a positive year, with most particles not affected by Gyre, resulting in relatively low speed and distance. Around the pole, the speed of the drift ice is lower in 2017 than 2010. From seasonal characteristics in 2010 and 2017, the movement of the drift ice increase in winter 2010 (0.22 m/s) and decrease to spring 2010 (0.16 m/s). In the case of 2017, the movement is increased in summer (0.22 m/s) and decreased to spring time (0.13 m/s). As a result, the particle tracking method will be appropriate to understand long-term drift ice movement trends by linking them with satellite data in place of limited field observations.

• Journal of Nutrition and Health
• /
• v.51 no.6
• /
• pp.567-579
• /
• 2018

Purpose: This study examined the mediation effects of dietary habits, nutrient intake, daily life in the relationship between the working hours of Korean shift workers and metabolic syndrome. Methods: Data were collected from the sixth (2013-2015) Korea National Health and Nutrition Examination Survey (KNHANES). The stochastic regression imputation was used to fill missing data. Statistical analysis was performed in Korean shift workers with metabolic syndrome using the SPSS 24 program for Windows and a structural equation model (SEM) using an analysis of moment structure (AMOS) 21.0 package. Results: The model fitted the data well in terms of the goodness of fit index (GFI) = 0.939, root mean square error of approximation (RMSEA) = 0.025, normed fit index (NFI) = 0.917, Tucker-Lewis index (TLI) = 0.984, comparative fit index (CFI) = 0.987, and adjusted goodness of fit index (AGFI) = 0.915. Specific mediation effect of dietary habits (p = 0.023) was statistically significant in the impact of the working hours of shift workers on nutrient intake, and specific mediation effect of daily life (p = 0.019) was statistically significant in the impact of the working hours of shift workers on metabolic syndrome. On the other hand, the dietary habits, nutrient intake and daily life had no significant multiple mediator effects on the working hours of shift workers with metabolic syndrome. Conclusion: The appropriate model suggests that working hours have direct effect on the daily life, which has the mediation effect on the risk of metabolic syndrome in shift workers.

• Journal of Plant Biotechnology
• /
• v.46 no.2
• /
• pp.127-135
• /
• 2019

The purpose of this study was to investigate suitable parts for callus induction and optimal concentrations of growth regulators, contained in the medium affecting shoot and rooting for in vitro mass production of Haworthia truncata. Leaves and flower bud showed 100% callus formation rate at NAA $1{\sim}2mgL^{-1}$ treatment, and NAA $1mgL^{-1}$ + TDZ $2mgL^{-1}$ treatment. The flower stalk showed 75% callus formation rate, at NAA $2mgL^{-1}$ + TDZ $2mgL^{-1}$ treatment in H. truncata. While the rate of callus formation was high in leaves and flower bud, leaves were the most efficient in obtaining most culture parts. Shoot induction rate from callus was highest, at NAA $0.1mgL^{-1}$ treatment in H. truncata. Additionally, the number of shoots formation was 66.3 shoots high, in NAA $1mgL^{-1}$ + BA $0.1mgL^{-1}$ treatment in H. truncata. In the case of acclimatization of regenerated plant, growth characteristics did not show significant difference (95%) shading with respect to the different ratio of substrate mixture, and it was determined that would be appropriate, considering plant height and appearance preference of H. truncata. It was established that optimization of culture condition, was responsible for mass propagation in vitro cultures of H. truncata.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.16-31
• /
• 2013

This study addresses how the main group of community ritual changed as the regional community changed during the period of Japan's colonial rule of Korea with emphasis on Gwanseongmyo in Jangchung-dong, Seoul. First, almost every regional community was changed because of city planning which was carried out by Japan in Korea for colonial exploitation and for the use of military bases. Mapo-dong and Seobinggo-dong were the appropriate examples. The city planning projects by the Japanese colonial government selected Jangchung-dong as the place of settlement of many Japanese people. The stream, Cheonggyecheon, made a border between the Korean and Japanese settlements and the traditional system of regional community in Jangchung-dong was changed and reorganized considerably. Second, the Japanese government used the rituals of regional community purposefully to combine them with the ceremony in the Japanese shrine. Those who supported Japan performed the regional rituals and tried to follow the policy of 'Rule of Culture' required by the Japanese colonial government. However, most regional rituals continued as they were before Japan's colonial rule of Korea without any change. Under this new trend the ritual of Gwanseongmyo was changed from the ritual for worshipping Guan Yu to that of the regional community. Last, the main groups that led the rituals of regional community were diversified during the period of Japan's colonial rule of Korea. In other words, the rituals of community used to be led by the families that lived in the region for generations before Japan's colonial rule of Korea. However, they were later led by various groups that emerged as a result of the colonial rule, urbanization, commercial development, regional differentiation, and so on. As an example,Yeongsinsa of Gwanseongmyo,which was the main group to lead the ritual of Gwanseongmyo, shows that the regional community rituals were extended to worshipping Guan Yu. The members of the main group to lead the ritual were pro-Japanese senior officials who were formerly military officers. This shows that the main groups leading the regional community rituals were further diversified.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.72-87
• /
• 2009

This research is insect diversity analysis on the basis of survey results and bibliographies of Hongdo Island, Mts. Seoraksan, Hallasan, Daeamsan & Daeusan, Hyangnobong peak & Geonbongsan nature reserves and Dokdo Protected Natural Area among 10 designated nature reserves. The Mt. Hallasan nature reserve has 1,867 species in 22 orders and shows the highest species diversity. The species diversities of Mt. Seoraksan, Mt. Hyangnobong peak & Geonbongsan, Hongdo Island, Mt. Daeamsan & Daeusan, and Dokdo Protected Natural Area reveal 1,604 species in 19 orders, 704 species in 18 orders, 474 species in 19 orders, 468 species in 16 orders, and 114 species in 11 orders, respectively, in descending order. The order Lepidoptera shows as dominant taxa in Hongdo, Seoraksan, Hallasan, Hyangnobong peak & Geonbongsan, whereas the order Coleoptera as subdominant taxa in these areas. On the other hand, in Mt. Daeamsan & Daeusan, and Dokdo Protected Natural Area, the order Coleoptera appears as dominant taxa whereas the order Lepidoptera as subdominant taxa. The order Ephemeroptera has been shown the highest species diversity in Seoraksan which is reported to 25 species, Odonata in Hallasan to 28, Dermaptera in Seoraksan to 9, Orthoptera in Hallasan to 51, Hemiptera in Hallasan to 175, Homoptera in Seoraksan to 126, Hymenoptera in Hallasan to 183, and Diptera in Hallasan to 206. The species diversity is generally poor in Daeamsan & Daeusan, Hyangnobong peak & Geonbongsan, and Dokdo Protected Natural Area. Maybe this result is caused by the lack of various academic surveys compared to the other areas. It is needed to study systematic academic investigation on insect in the nature reserve areas in Korea, and to plan appropriate management and conservation on natural environment considering biodiversity of each nature reserve area.

• Journal of Hospice and Palliative Care
• /
• v.22 no.1
• /
• pp.39-47
• /
• 2019

Purpose: This study was performed to investigate the current status of pediatric palliative care provision and how it is perceived by the palliative care experts. Methods: A descriptive study was conducted with 61 hospice institutions. From September through October 2017, a questionnaire was completed by experts from the participating institutions. Data were analyzed using SPSS 21.0. Results: Among 61 institutions, palliative care is currently provided for pediatric cancer patients by 11 institutions (18.0%), all of which are concentrated in Seoul, Incheon and Gyeonggi and Gyengsang provinces; 85.2% of all do not plan to provide specialized pediatric palliative care in the future. According to the experts, the main barriers in providing pediatric palliative care were the insufficient number of trained specialists regardless of the delivery type. Experts said that it was appropriate to intervene when children were diagnosed with cancer that was less likely to be cured (33.7%) and to move to palliative care institutions when their conditions worsened (38.2%); and it was necessary to establish a specialized pediatric palliative care system, independent from the existing institutions for adult patients (73.8%). Conclusion: It is necessary to develop an education program to establish a nationwide pediatric palliative care centers. Pediatric palliative care intervention should be provided upon diagnosis rather than at the point of death. Patients should be transferred to palliative care institutions after intervention by their existing pediatric palliative care team at the hospital is started.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.3
• /
• pp.211-218
• /
• 2019

Purpose: The purpose of the present study was to compare the accuracy of four different metal copings fabricated by CAD/CAM technology and to evaluate clinical effectiveness. Materials and methods: Composite resin tooth of the maxillary central incisor was prepared for a metal ceramic crown and duplicated metal die was fabricated. Then scan the metal die for 12 times to obtain STL files using a confocal microscopy type oral scanner. Metal copings with a thickness of 0.5 mm and a cement space of $50{\mu}m$ were designed on a CAD program. The Co-Cr metal copings were fabricated by the following four methods: Wax pattern milling & Casting (WM), Resin pattern 3D Printing & casting (RP), Milling & Sintering (MS), Selective laser melting (SLM). Silicone replica technique was used to measure marginal and internal discrepancies. The data was statistically analyzed with One-way analysis of variance and appropriate post hoc test (Scheffe test) (${\alpha}=.05$). Results: Mean marginal discrepancy was significantly smaller in the Group WM ($27.66{\pm}9.85{\mu}m$) and Group MS ($28.88{\pm}10.13{\mu}m$) than in the Group RP ($38.09{\pm}11.14{\mu}m$). Mean cervical discrepancy was significantly smaller in the Group MS than in the Group RP. Mean axial discrepancy was significantly smaller in the Group WM and Group MS then in the Group RP and Group SLM. Mean incisal discrepancies was significantly smaller in the Group RP than in all other groups. Conclusion: The marginal and axial discrepancies of the Co-Cr coping fabricated by the Wax pattern milling and Milling/Sintering method were better than those of the other groups. The marginal, cervical and axial fit of Co-Cr copings in all groups are within a clinically acceptable range.

• Journal of National Security and Military Science
• /
• s.15
• /
• pp.57-86
• /
• 2018

The ROKAF has been training for a number of exercise for victory in the war, but the lack of aviation ammunition has become a big issue every year. However, due to the limitation of defense resources, there are many difficulties in securing and stockpiling ammunition for the war readiness. Therefore, there is a need to find a way to secure aviation ammunition for war readiness in a more economical way, so In this study, we analyze the precedent research case and the case of the reduction of the purchase cost of weapon system of other countries, and then I have suggested a plan that is appropriate for our situation. As a result of examining previous research cases for this study, there were data that KIDA studied in 2012, Precision-guided weapons acquisition cost reduction measures pursued by US Air Force And the use of procurement agencies that are being implemented by NATO member countries. Based on this study, the following four measures were proposed to reduce the purchase cost of aviation ammunition. First, the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Second, join the NATO Support & Procurement Agency (NSPA) Third, it builds a purchasing community centered on the countries operating the same ammunition Fourth, participating in the US Air Force's new purchase plan for ammunition and purchase it jointly. The main contents of these four measures are as follows. 1. the mutual aid support agreement was developed to sign the ammunition joint operation agreement. Korea has signed agreements on mutual logistics support with 14 countries including the United States, Israel, Indonesia, Singapore, Australia, and Taiwan. The main purpose of these agreements is mutual support of munitions and materials, also supporting the training of the peace time and promoting exchange and cooperation. However, it is expected that there will be many difficulties in requesting or supporting mutual support in actual situation because the target or scope of mutual aid of ammunition is not clearly specified. Thus, a separate agreement on the mutual co-operation of more specific and expanded concepts of aviation ammunition is needed based on the current mutual aid support agreements 2. join the NATO Support & Procurement Agency (NSPA) In the case of NATO, there is a system in which member countries purchase munitions at a low cost using munitions purchase agencies. It is the NATO Purchasing Agency (NSPA) whose mission is to receive the purchasing requirements of the Member Nations and to purchase them quickly and efficiently and effectively to the Member Nations. NSPA's business includes the Ammunition Support Partnership (ASP), which provides ammunition purchase and disarming services. Although Korea is not a member of NATO, NSPA is gradually expanding the scope of joint procurement of munitions, and it is expected that Korea will be able to join as a member. 3. it builds a purchasing community centered on the countries operating the same ammunition By benchmarking the NSPA system, this study suggested ways to build a purchasing community with countries such as Southeast Asia, Australia, and the Middle East. First, it is necessary to review prospectively how to purchase ammunition by constructing ammunition purchasing community centered on countries using same kind of ammunition. 4. participating in the US Air Force's new purchase plan for ammunition When developing or purchasing weapons systems, joint participation by several countries can reduce acquisition costs. Therefore, if the US Air Force is planning to acquire aviation ammunition by applying it to the purchase of aviation ammunition, we will be able to significantly reduce the purchase cost by participating in this plan. Finally, there are some limitations to the method presented in this study, but starting from this study, I hope that the research on these methods will be actively pursued in the future.