• Smart Structures and Systems
• /
• 제33권5호
• /
• pp.325-332
• /
• 2024

This study proposes a novel long short-term memory (LSTM)-based approach for predicting carbonation depth, with the aim of enhancing the durability evaluation of concrete structures. Conventional carbonation depth prediction relies on statistical methodologies using carbonation influencing factors and in-situ carbonation depth data. However, applying in-situ data for predictive modeling faces challenges due to the lack of time-series data. To address this limitation, an LSTM-based carbonation depth prediction technique is proposed. First, training data are generated through random sampling from the distribution of carbonation velocity coefficients, which are calculated from in-situ carbonation depth data. Subsequently, a Bayesian theorem is applied to tailor the training data for each target bridge, which are depending on surrounding environmental conditions. Ultimately, the LSTM model predicts the time-dependent carbonation depth data for the target bridge. To examine the feasibility of this technique, a carbonation depth dataset from 3,960 in-situ bridges was used for training, and untrained time-series data from the Miho River bridge in the Republic of Korea were used for experimental validation. The results of the experimental validation demonstrate a significant reduction in prediction error from 8.19% to 1.75% compared with the conventional statistical method. Furthermore, the LSTM prediction result can be enhanced by sequentially updating the LSTM model using actual time-series measurement data.

• 대한원격탐사학회지
• /
• 제36권2_1호
• /
• pp.103-119
• /
• 2020

최근 기후변화와 4대강 살리기 사업으로 인위적으로 조성된 하천의 급속한 재퇴적 및 침식이 의심스러운 상황이다. 이에 따라 최근 하천법을 개정하여 하상변동조사를 정기적으로 실시해야 한다고 규정하였다. 하지만 하상 조사의 공간적 범위 및 밀도가 대폭 증가하고 조사 간격은 줄어드는 추세에 반해 기술적인 한계가 존재하여, 국가기관 등에서 하상 조사 효율화를 위해 혁신적인 하상조사 기술 개발에 관심을 보이고 있다. 하상 조사의 핵심은 다양한 하천 조건에서 하천의 수심을 측정하는 것에 있으며, 일반적인 지상의 지형측량에 비해 수중에서의 직접 조사는 상대적으로 많은 위험과 시간, 비용을 수반한다. 이에 전통적인 기술의 한계를 극복하고자, 해양 수심측량에 주로 활용되어 온 음향측심기(Echo-sounder)를 하천에 적용하였지만, 여러 기술적 한계로 여전히 광범위한 영역에 대한 주기적인 조사에 어려움을 겪고 있는 실정이다. 이에 원격탐사를 활용한 기법이 그 대안으로 각광받고 있으며, 특히 분광특성을 활용한 수심 측정의 가능성을 보이고 있다. 본 연구에서는 분광특성 중 반사도를 활용하여 수심을 측정할 수 있는 기술을 개발하고 이를 검토하고자 한다. 본 연구에서 제시한 기법을 적용한 결과, 약 0.95 m이내에 해당하는 수심 범위에서 실제 측정된 수심과 0.986, 0.053 m에 해당하는 상관성과 오차를 나타냄을 확인하였다. 향후 본 연구를 드론에 탑재된 초분광 센서에 접목할 경우, 공간적인 수심 측정에 가능할 것으로 사료되며, 광범위한 영역의 주기적인 하상변동조사에 큰 기여를 할 것으로 판단된다.

• International Journal of Concrete Structures and Materials
• /
• 제18권3E호
• /
• pp.145-150
• /
• 2006

An experiment with the objective of providing guidelines for joint depth determination and timing of contraction joint sawcutting to avert uncontrolled cement concrete pavement cracking has been conducted. Theoretical analysis and laboratory tests were performed to help in understanding and analyzing the field observation. Using two-dimensional elastic fracture mechanics, the influence of several parameters on crack propagation was delineated by a parametric study, involving initial notch ratio, joint spacing, Young's modulus and thermal expansion coefficient of concrete, temperature gradient, and modulus of subgrade reaction. Bimaterials made of rock plus cement mortar and rock plus polymer mortar were applied to the concrete in a field test section, and they were subjected to fracture tests. These tests have shown that fracture mechanics is a powerful tool not only in judging the quality of the jointed cement concrete pavement but also in providing a criterion for crack propagation and delamination. Based on fracture mechanics, a method is proposed to determine the joint depth, sawcut timing, and spacing of the jointed cement concrete pavement. This method has successfully been applied to a test section in Seohaean expressway. This study also summarizes the research results obtained from a field test for jointed plain concrete pavement, which was also carried out on the Seohaean expressway.

• 열처리공학회지
• /
• 제11권4호
• /
• pp.247-257
• /
• 1998

In order to evaluate the relation between prior structure and fatigue strength on a induction surface hardened medium carbon steel(SAE1050M) for automotive drive shafts, torsional fatigue test were conducted with various cases of different hardened depths and applied loads. Prior structures of the steel such as pearlite, fine pearlite and spheroidal pearlite were prepared by conventional nomalizing, tempering after quenching and spheroidized annealing, respectively. Maximum torsional fatigue strength can be obtained when the case depth is 18~25% diameter of the bar in each prior structure. The effect of case depth on the torsional fatigue strength was different depending on applied load to specimen, but the most good fatigue life was shown in the case of pearlitic structure when the case depth was 4.0~5.5mm(18~25% of bar diameter). Among three different prior structures, energy consumption, to obtain high strength or to get the same case depth, was the most saved in the case of pearlitic structure.

• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.375-384
• /
• 2020

In this study, the application of conventional cubic law to a deep depth condition was experimentally evaluated. Moreover, a modified equation for estimating the rock permeability at a deep depth was suggested using precise hydraulic tests and an effect analysis according to the vertical stress, pore water pressure and fracture roughness. The experimental apparatus which enabled the generation of high pore water pressure (< 10 MPa) and vertical stress (< 20 MPa) was manufactured, and the surface roughness of a cylindrical rock sample was quantitatively analyzed by means of 3D (three-dimensional) laser scanning. Experimental data of the injected pore water pressure and outflow rate obtained through the hydraulic test were applied to the cubic law equation, which was used to estimate the permeability of rock fracture. The rock permeability was estimated under various pressure (vertical stress and pore water pressure) and geometry (roughness) conditions. Finally, an empirical formula was proposed by considering nonlinear flow behavior; the formula can be applied to evaluations of changes of rock permeability levels in deep underground facility such as nuclear waste disposal repository with high vertical stress and pore water pressure levels.

• 대한인간공학회지
• /
• 제13권1호
• /
• pp.37-46
• /
• 1994

The accurate error size and discrimination region in the perception of depth amount from 3-dimensional images by the human visual system will be the basic data for the utilization and application of the binocular 3- eimensional image system. This paper is focused on studying the accuracy of the depth amount perceived from 3- dimensional images by the human visual system. From the performed experiment, the following results have been obtained: (1) The depth amount perceived from the binocular 3- dimensional images has been displayed by a proper scale of distance, and found to be imprecise and also have a large variance. (2) In utilizing the binocular 3-dimensional image system, it seems more appropriate to make the images viewed outward rather than inward from the screen in the regard of error and variance. (3) The binocular 3-dimensional image system can be effectively applied to displaying unreal space, for example, the layout of room in design, from the viewpoint of perception characteristics of depth amount.

• 한국안전학회지
• /
• 제23권1호
• /
• pp.28-34
• /
• 2008

The corrugated steel plate structures is applied to the construction of mountain tunnel portal part with shallow depth, the tunnel on the outskirts of urban areas and ecology move passage. In this study, A finite element method is used for research the behavior of corrugated steel plate structures due to construction position under declinating earth pressure and excavation depth. A finite element method were performed varying construction position(10, 15, 20 and 25m) from slope and excavation depth from surface. The hoop thrust and moment, displacement of corrugated steel plate subjected to construction position and excavation depth is determined from a finite element method. From results of finite element method, it was found that the increase of thrust and the decrease of displacement as the amount of distance increase from slope with construction position. But the thrust and moment, displacement has not different value with excavation depth.

• 전기학회논문지
• /
• 제61권4호
• /
• pp.639-642
• /
• 2012

Optical coherence tomography(OCT) can provide real-time and non-invasive subsurface imaging with ultra-high resolution of micrometer scale. However, conventional OCT systems generally have a limited imaging depth range within a depth of only 1-2 mm. To overcome the limitation, we have proposed an active surface tracking algorithm used in common-path Fourier-domain OCT system in order to extend the imaging depth range. The surface tracking algorithm based on the threshold and Savitzky-Golay filter of A-scan data was applied to real-time tracking. The algorithm has controlled a moving stage according to the sample's surface variance in real time. An OCT image obtained by the algorithm clearly show an extended imaging depth range. Consequently, the proposed algorithm demonstrated the potential for improving the conventional OCT systems with limitary depth range.

• 제어로봇시스템학회논문지
• /
• 제18권12호
• /
• pp.1115-1121
• /
• 2012

This paper proposes a method to extract accurate plane of an object in unstructured environment for a humanoid robot by using a laser scanner. By panning and tilting 2D laser scanner installed on the head of a humanoid robot, 3D depth map of unstructured environment is generated. After generating the 3D depth map around a robot, the proposed plane extraction method is applied to the 3D depth map. By using the hierarchical clustering method, points on the same plane are extracted from the point cloud in the 3D depth map. After segmenting the plane from the point cloud, dimensions of the planes are calculated. The accuracy of the extracted plane is evaluated with experimental results, which show the effectiveness of the proposed method to extract planes around a humanoid robot in unstructured environment.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.27-32
• /
• 2007

Determination of crack depth in filed using the self-calibrating surface wave transmission measurement and the cutting frequency in the transmission function (TRF) is very difficult due to variations of the measurement conditions. In this study, it is proposed to use the measured full TRF as a feature for crack depth assessment. A principal component analysis (PCA) is employed to generate a basis of the measured TRFs for various crack cases. The measured TRFs are represented by their projections onto the most significant principal components. Then artificial neural networks (NNs) using the PCA-compressed TRFs is applied to assess the crack in concrete. Experimental study is carried out for five different crack cases to investigate the effectiveness of the proposed method. Results reveal that the proposed method can be effectively used for the crack depth assessment of concrete structures.