• The korean journal of orthodontics
• /
• v.36 no.3 s.116
• /
• pp.178-187
• /
• 2006

The present study was performed to evaluate the stress distribution on the diameter of the mini-implant and insertion angle to the bone surface. To perform three dimensional finite element analysis, a hexadron of $15{\times}15{\times}20mm^3$ was used, with a 1.0 mm width of cortical bone. Mini-implants of 8 mm length and 1.2 mm, 1.6 mm, and 2.0 mm in diameter were inserted at $90^{\circ},\;75^{\circ},\;60^{\circ},\;45^{\circ},\;and\;30^{\circ}$ to the bone surface. Two hundred grams of horizontal force was applied to the center of the mini-implant head and stress distribution and its magnitude were analyzed by ANSYS, a three dimensional finite element analysis program. The findings of this study showed that maximum von Mises stresses in the mini-implant and cortical and cancellous bone were decreased as the diameter increased from 1.2 mm to 2.0 mm with no relation to the insertion angle. Analysis of the stress distribution in the cortical and cancellous bone showed that the stress was absorbed mostly in the cortical bone, and little was transmitted to the cancellous bone. The contact area increased according to the increased diameter and decreased insertion angle to the bone surface, but maximum von Mises stress in cortical bone was more significantly related with the contact point of the mini-implant into the cortical bone surface than the insertion angle to the bone surface. The above results suggest that the maintenance of the mini-implant is more closely related with the diameter and contact point of the mini-implant into the cortical bone surface rather than the insertion angle.

• Journal of Korean Medical classics
• /
• v.4
• /
• pp.19-73
• /
• 1990

Today, many people are more interested in preventing the disease than curing it. Chi-Kung (氣功) is the way of Life-Cultivation (養生法) peculiar to the orient, it is reported in china that Chi-Kung has an excellent curative value not only in curing the disease but also in preventing it. But the full-scale study of Chi-Kung is not be made up to now in Korea, so I studied the developmental history of chinese Chi-Kung through the oriental medical books. From this study, I reached the following conclusions ; 1. Chi-Kung is naturally derived from the self-preservation instinct to adapt oneself to circumstances of the nature, but in the investigation from the documentational records, it is originated in the treatment method of the Sam-Huang-O-Jae (三皇五帝 )period to cure the abnormal circulation of the vital force and blood caused by damp (濕). 2. As the principle and the method of the Life-Cultivation of the Chun-chu-Jeon-Kook (春秋戰國) periods were recorded in Huang-Jae-Nai-Gyung (黃帝內徑) detailly and the remedy examples by ancient Chi-Kung such as Tao-Yin (導引), Haeng-Chi (行氣) were presented, we considered that theoretical basis of the development of Life-cultivation and Chi-Kung study was furnished in that period. 3. A famous doctor, Hwa-Ta (華陀) lived in Han dynasty, researched the theory and practice of Tao-Yin transmitted from the former generations, as that result, he formed a kind of medical gymnastics what is called O-Keum-Hi (五禽戱). It is considered that 'O-Keum-Hi' is a Tao-Yin method developed more practically and systemetically than the Tao-Yin appeared in the 'Jang-Ja' (莊子) or 'Hoy-Nam-Ja' (淮南子). 4. In Wui-Jin-Nambook Jo (魏晋南北朝) periods, the contents of Chi-Kung were more abundant under the influence of Buddhism (佛敎) and Taoism (道敎). Galhong (葛洪), the author of 'Po-Bak-Ja' (抱朴子) arranged the ancient Chi-Kung method systematically first of all, Tao-Goeng-Gyung (陶宏景), the author of 'Yang-Seong-Yeun-Myung-Rok' (養性延命錄) recorded the 'Yook-Ja-Geul' (六字訣) first time. 5. There is a new development of Chi-Kung therapy in Soo-Tang-Odae (隋唐五代) pefiods, especially So-Won-Bang (巢元方), the author of 'Jey-Byung-Won-Hwu-Ron' (諸病源候論) collected aimost all of the Chi-Kung method, for curing the disease formed before soo (隋) period. From that fact, we supposed that Chi-Kung was utilized more widely in curing the disease. 6. 'So-Ju-Cheon-Hwa-Hu-Peob' (小周天火候法) was adopted as the best orthodox approach under the influence of Nae-Tan-Taoist (道敎內丹學派) in Song-Keum-Won (宋金元) periods, especially in the song dynasty, 'Pal-Dan-Geum' (八段錦) was appeared and assignment of six-Chi (六氣) for bowel and viscera in the 'Yook-Ja-Geul' (六字訣) was decided firmly, that is to say Lung-Si (肺-呬), Heart-Kha (心-呵), Spleen-Hoa (脾-呼), Liver-Hoe (肝-噓), Kidneychui (賢-吹), Three-Burner-shi (三焦-嘻). 7. In Myung-Cheong (明淸) periods, The general practitioner applied the principle of 'Byun-Jeng-Ron-Chi' (辨證論治) to the Chi-Kung field, and after Myeong dynasty the style of doing 'Yook-Ja-Gyel' (六字訣) was developed to the moving style. 8. Today, in china, the study on the Chi-Kung is being progressed constantly under the positive assistance of government, Chi-Kung-Hak (氣功學) has taking its place as a branch of study step by step. It is considered that the establishment of Chi-Kung-Hak Classroom (氣功學教室) and Medical Chi-Kung Center (氣功療法室) for special and systematic research are needed, at the same time the settlement of institutional system for training the Chi-Kung technician (氣功師) is also needed.

• Progress in Medical Physics
• /
• v.16 no.1
• /
• pp.16-23
• /
• 2005

The objective of this study was to construct multi-element ultrasound applicators for the treatment of gynecologic cancer with high dose rate brachytherapy. For the treatment of uterus, piezo-ceramic crystal transducer (PZT -5A) with outer diameter of 4 mm, wall thickness of 1.3 mm, and length of 24.5 mm was selected. For the treatment of cervix or vagina, it should be possible to insert the applicator into the vagina. Thus, a cylindrical PZT -8 material with outer diameter of 24.5 mm, wall thickness of 1.3 mm, and length of 15.2 mm was selected. The operating frequencies determined by vector impedance measurement were 3.2 MHz for the PZT 5A cylinder (OD=4 mm) and 1.7 MHz for the PZT -8 cylinder (OD: 24.5 mm). The ratios of generated acoustic output power to applied electric power were 33% and 61% for the tandem type crystal and the cylinder type crystal, respectively. The radiated acoustic pressure fields from both transducers were calculated using a Matlab code and measured in water using hydrophone. There was good agreement between measured and calculated acoustic pressure field distribution. For a tandem type transducer, the calculated acoustic pressure field decreased from 0.023 MPa at 10 mm to 0.010 Mpa at 30 mm, the reduction of 57%. For the cylinder type transducer which will be used for the treatment of vagina showed 78% reduction at 15 mm and 66% at 25 mm as compared to values at 5 mm from the surface. Based on the characteristics of the transducers, this study demonstrated the possibility of using the crystals as a heating source. Finally, a 3-element and 4-element prototype applicators were constructed. The 3-element applicator is 75 mm long and 4 mm thick and will be used for the treatment of uterus. The 4-element applicator is 61 mm long and 24.5 mm thick and will be used for the treatment of vagina. Using these applicators, it is possible to generate enough power to increase temperature to therapeutic level.

• Restorative Dentistry and Endodontics
• /
• v.32 no.2
• /
• pp.111-120
• /
• 2007

The purpose of this study is to evaluate the effects of surface treatment and composition of reinforcement material on fracture strength of fiber reinforced composite inlay bridges. The materials used for this study were I-beam, U-beam TESCERA ATL system and ONE STEP(Bisco, IL, USA). Two kinds of surface treatments were used; the silane and the sandblast. The specimens were divided into 11 groups through the composition of reinforcing materials and the surface treatments. On the dentiform, supposing the missing of Maxillary second pre-molar and indirect composite inlay bridge cavities on adjacent first pre-molar disto-occlusal cavity, first molar mesio-occlusal cavity was prepared with conventional high-speed inlay bur. The reinforcing materials were placed on the proximal box space and build up the composite inlay bridge consequently. After the curing, specimen was set on the testing die with ZPC. Flexural force was applied with universal testing machine (EZ-tester; Shimadzu, Japan). at a cross-head speed of 1 mm/min until initial crack occurred. The data was analyzed using one-way ANOVA/Scheffes post-hoc test at 95% significance level. Groups using I-beam showed the highest fracture strengths (p<0.05) and there were no significant differences between each surface treatment (p>0.05) Most of the specimens in groups that used reinforcing material showed delamination. 1. The use of I-beam represented highest fracture strengths (p<0.05) 2. In groups only using silane as a surface treatment showed highest fracture strength, but there were no significant differences between other surface treatments (p>0.05). 3. The reinforcing materials affect the fracture strength and pattern of composites inlay bridge. 4 The holes at the U-beam did not increase the fracture strength of composites inlay bridge.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.92-98
• /
• 2012

Purpose: The aim of this study was to evaluate the effects of different abutment materials on abutment screw loosening and settling-down effect in conical connection type implant system. Materials and methods: Three types of abutment, cementation, gold UCLA, and metal UCLA abutment were used. Two UCLA groups were fabricated in a similar pattern to cementation abutment. Type III gold alloy and Nickel-Chromium alloy was used for casting gold UCLA abutment and metal UCLA abutment, respectively. Fixture and abutment were tightened to 30 Ncm by using digital torque controller and re-tightening was conducted with same force after 10 minutes. Digital torque gauge was used to measure loosening torque and fixture/abutment length was measured by digital micrometer. Dynamic loads between 25 N and 250 N were applied with $0^{\circ}$ angle to the abutment axis. After loading, fixture/abutment length was re-measured and amount of settlement was calculated. Loosening torque value was also measured for comparison Results: All three groups showed significant differences of length when comparing before and after loading, but there was no significant difference of settling amount in all groups. Loosening torque values were significantly decreased when comparing before and after loading in all groups($P$<.05). However, there was no significant difference in loss of loosening torque values when compared to groups. Conclusion: In internal conical connection type implants, dynamic load affected on settlement and loosening torque of implant, but there was no differences between abutments materials. Likewise gold UCLA abutment, metal UCLA abutment might be able to withstand functional load.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Journal of the Mineralogical Society of Korea
• /
• v.31 no.3
• /
• pp.161-172
• /
• 2018

Multi-anvil press (MAP) is one of the high pressure apparatuses and often generates the pressure-conditions ranging from 5 to 25 GPa and temperature-conditions up to $2,300^{\circ}C$. The MAP is, therefore, suitable to explore the pressure-induced structural changes in diverse earth materials from Earth's mantle and the bottom of the mantle transition zone (~660 km). In this study, we present the experimental results for pressure-load calibration of the 1,100-ton multi-anvil press equipped in the authors' laboratory. The pressure-load calibration experiments were performed for the 14/8 step, 14/8 G2, 14/8 HT, and 18/12 assembly sets. The high pressure experiments using ${\alpha}$-quartz, wollastonitestructure of $CaGeO_3$, and forsterite as starting materials were analyzed by powder X-ray diffraction spectroscopy. The phase transition of each mineral indicates the specific pressure that is loaded to a sample at $1,200^{\circ}C$: a transition of ${\alpha}$-quartz to coesite at 3.1 GPa, that of garnet-structure of $CaGeO_3$ to perovskite-structure at 5.9 GPa, that of coesite to stishovite at 9.2 GPa, and that of forsterite to wadsleyite at 13.6 GPa. While the estimated pressure-load calibration curve is generally consistent with those obtained in other laboratories, the deviation up to 50 tons is observed at high pressure above 10 GPa. This is partly because of the loss of oil pressure at high pressure resulting from the differences in a sample chamber, and the frictional force between pressure medium and second anvil. We also report the ${\sim}200^{\circ}C/mm$ of thermal gradient in the vertical direction of the sample chamber of 14/8 HT assembly. The pressure-load calibration curve and the observed thermal gradient within the sample chamber can be applied to explain the structural changes and the relevant macroscopic properties of diverse crystalline and amorphous earth materials in the mantle.

• The korean journal of orthodontics
• /
• v.36 no.6
• /
• pp.412-421
• /
• 2006

Objective: The result of finite element analysis depends on material properties, structural expression, density of element, and boundar or loading conditions. To represent proper elastic behavior, a finite element model was made using Hounsfield unit (HU) values in CT images. Methods: A 13 year 6 month old male was used as the subject. A 3 dimensional visualizing program, Mimics, was used to build a 3D object from the DICOM file which was acquired from the CT images. Model 1 was established by giving 24 material properties according to HU. Model 2 was constructed by the conventional method which provides 2 material properties. Protraction force of 500g was applied at a 45 degree downward angle from Frankfort horizontal (FH) plane. Results: Model 1 showed a more flexible response on the first premolar region which had more forward and downward movement of the maxillary anterior segment. Maxilla was bent on the sagittal plane and frontal plane. Model 2 revealed less movement in all directions. It moved downward on the anterior part and upward on the posterior part, which is clockwise rotation of the maxilla. Conclusion: These results signify that different outcomes of finite element analysis can occur according to the given material properties and it is recommended to use HU values for more accurate results.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.173-205
• /
• 2008

Space debris have frequently caused damage to space objects like satellites in orbits and sometimes have fallen on the earth. Such increase in space debris will lead to the high possibility of threatening space activities of mankind. However, it is not so easy for the damage caused both by identified and by unidentified space debris to be recovered since in the regime of the current international law, there is no legislation of prescribing the damage done by space debris. For overcoming the limitation it seems desirable that either the Liability Convention should partly be amended or new international law regime should be established. For instance, 'space debris' should be included in the new definition of 'space object' and the range of launching should also be defined clearly by making the concept of 'launching' somewhat more specified. Moreover, the subject of international liability for damage caused by space debris should be divided into two classes: the subject before and after registration. While in case of before-registration launch states should be held liable for any damage jointly or individually, in case of after-registration 'the state of registry' or 'owner' of the space debris should be. In the event of damage being caused elsewhere than on the surface of the earth to a space object of other State, 'fault-based liability' is currently applied. But it needs to be changed into 'absolutely liability'. In this paper, 'Liability Pool', 'Insurance', 'Market-Share Liability' are presented as aid devices of the damages resulting from unidentified space debris. They should be defined through the amendment of the Liability Convention or another international treaty. Some day there comes a time when our country shall possess many of the astronomical price of satellites. It means that we can't be free from the damage by the increasing number of space debris. Provided that our satellites are damaged by such space debris, it will do the satellites damage and cause impaired functioning or troubles in operation. As a result, if we are not paid for the damage by space debris, we will be confronted with tremendous economic loss because it is necessarily connected with the excess burden of taxation. Thus, an international agreement regarding the measures of the compensation for space debris damage must be made very soon.

• Journal of the Korean Institute of Gas
• /
• v.24 no.2
• /
• pp.1-8
• /
• 2020

Centrifugal pump is a facility that transfers energy to fluid through centrifugal force, which is usually generated by rotating the impeller at high speed, and is a major process facility used in many LNG production bases such as vaporization seawater pump, industrial water and fire extinguishing pump using seawater. to be. Currently, pumps in LNG plant sites are subject to operating conditions that vary depending on the amount of supply desired by the customer for a long period of time. Pumps in particular occupy a large part of the consumption strategy at the plant site, and if the optimum operation condition is not available, it can incur enormous energy loss in long term plant operation. In order to solve this problem, it is necessary to identify the performance deterioration factor through the flow analysis and the result analysis according to the fluctuations of the pump's operating conditions and to determine the optimal operation efficiency. In order to evaluate operation efficiency through experimental techniques, considerable time and cost are incurred, such as on-site operating conditions and manufacturing of experimental equipment. If the performance of the pump is not suitable for the site, and the performance of the pump needs to be reduced, a method of changing the rotation speed or using a special liquid containing high viscosity or solids is used. Especially, in order to prevent disruptions in the operation of LNG production bases, a technology is required to satisfy the required performance conditions by processing the existing impeller of the pump within a short time. Therefore, in this study, the rotation difference of the pump was applied to the ANSYS CFX program by applying the modified 3D modeling shape. In addition, the results obtained from the flow analysis and the curve fitting toolbox of the MATLAB program were analyzed numerically to verify the outer diameter correction theory.