• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.63 no.3
• /
• pp.229-238
• /
• 2018

The purpose of this study was to evaluate the effects of nitrogen fertilization amount and timing of application on protein content, dough properties, change in protein fraction, and bread loaf volume for Korean wheat cultivars, Baekkang, Joongmo2008, and Saekeumkang, for bread with a superior gluten composition during the grain filling stage. Protein content increased with an increase in the amount of N and timing of application. The SDS segmentation volume (SDSS) increased with an increase in N, but there was no effect of the timing of N application on SDSS. An increase in N amount and timing of application caused a difference in dough properties, such as water absorption, mixing time, and tolerance, among the cultivars. Soluble and insoluble polymeric and monomeric protein contents increased with an increase in N amount and timing of application the three Korean wheat cultivars. The effects of N amount and application timing on bread loaf volume (BLV) varied among the cultivars. The BLV of Saekeumkang increased regardless of the N amount and timing of application, but that of Baekkang and Joongmo2008 cultivars was reduced. However, there was a positive correlation between protein content with the addition of N fertilization and BLV. In addition, SDSS, mixing time, and protein fractions were positively correlated with BLV. Since the response of fertilizer conditions was different for each wheat cultivar, it is necessary to build a suitable fertilizing system for each of them. Additionally, since the environment is changing, such as abnormal climate during the maturing period, research is needed to establish appropriate fertilizer conditions for varieties of bread wheat.

• ETRI Journal
• /
• v.37 no.2
• /
• pp.406-416
• /
• 2015

Timing plays a key role in expressing the qualitative aspects of a character's motion; that is, conveying emotional state, personality, and character role, all potentially without changing spatial positions. Temporal editing of locomotion style is particularly difficult for a novice animator since observers are not well attuned to the sense of weight and energy displayed through motion timing; and the interface for adjusting timing is far less intuitive to use than that for adjusting pose. In this paper, we propose an editing system that effectively captures the timing variations in an example locomotion set and utilizes them for style transfer from one motion to another via both global and upper-body timing transfers. The global timing transfer focuses on matching the input motion to the body speed of the selected example motion, while the upper-body timing transfer propagates the sense of movement flow - succession - through the torso and arms. Our transfer process is based on key times detected from the example set and transferring the relative changes of angle rotation in the upper body joints from a timing source to an input target motion. We demonstrate that our approach is practical in an interactive application such that a set of short locomotion cycles can be applied to generate a longer sequence with continuously varied timings.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.479-486
• /
• 2016

System-on-chip (SoC) designs have a number of flip-flops; the more flip-flops an SoC has, the longer the associated scan test application time will be. A scan shift operation accounts for a significant portion of a scan test application time. This paper presents physical-aware approaches for speeding up scan shift operations in SoCs. To improve the speed of a scan shift operation, we propose a layout-aware flip-flop insertion and scan shift operation-aware physical implementation procedure. The proposed combined method of insertion and procedure effectively improves the speed of a scan shift operation. Static timing analyses of state-of-the-art SoC designs show that the proposed approaches help increase the speeds of scan shift operations by up to 4.1 times that reached under a conventional method. The faster scan shift operation speeds help to shorten scan test application times, thus reducing test costs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.6
• /
• pp.30-36
• /
• 2003

Variable valve timing(VVT) mechanisms are used widely for improving fuel consumption and reducing emissions. Most of application, however, are limited in the DOHC engine. Dual equal retard/advance strategy is relatively simple one and can be applied to both SOHC and DOHC engines. In this study, effects of dual equal valve timing retard/advance are investigated to observe the feasibility of VVT system on an SOHC SI engine. The result shows that fuel economy and emissions are improved in the dual retard condition due to increased internal EGR. Some amount of increase in volumetric efficiency can be achieved by advancing valve timing at low speed and by retarding at high speed. In this case, however, full load power is not so much improved as the volumetric efficiency increases because of severe knock. In the dual advance condition, there is no merit in the fuel economy and emission.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.4
• /
• pp.52-57
• /
• 2003

Common rail injection system is flexible in injection timing, injection duration and pressure in engine. Many researches have reported on the merits in the application of common rail systems. This research investigated on characteristics and performance for single cylinder diesel engine with a common .ail injection system by varying major parameters such as injection timing, injection duration and common rail pressure. The injection timing and injection duration were controlled by electronic pulse generated. and common rail pressure were controlled by PCV driver. The 498cc single cylinder diesel engine was used in this experiment. All data for combustion pressure, injection timing and injection duration were recorded by Labview. Furthermore, this test was focused on how to optimize injection conditions.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.80-81
• /
• 2012

Our society consist of many country's critical infrastructure such as production and distribution of electric power systems, communications technology, tele-communications, financial system, transportation systems when those systems are operated efficiently and normally. Country's critical infrastructure and its application fields of this magnitude rely on more and more P.N.T (Positioning, Navigation. Timing) systems, in which the tele-communications(Timing), financial market(Timing), logistics (Positioning, Navigation, Timing), transportation(Positioning, Navigation. Timing) is shoring. Reliability concerned about the exact position and timing of these critical national infrastructure rely on ability to provide a stable from GPS.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.11-17
• /
• 2019

Purpose : The purpose of this study was to determine the effects of specific frequency and application timing of microcurrent (MC) on the mechanical property of muscle caused by delayed onset muscle soreness (DOMS). Methods : The subjects were 32 healthy adults with 8 subjects randomly assigned to four groups (I; 40 Hz MC while inducing DOMS, II; 40 Hz MC immediately after inducing DOMS, III; 284 Hz MC while inducing DOMS, IV; 284 Hz MC immediately after inducing DOMS). DOMS is applied to the biceps brachii muscle while MC was applied at an intensity of $300{\mu}A$ for 10 minutes. The mechanical properties of muscle were measured before and immediately after DOMS. Results : In terms of muscle tone, there were significant differences in interaction effects between time and groups. Regarding muscle elasticity and stiffness, there were no significant differences in interaction effects between time and groups but there were only significant differences in main effects based on time. Conclusion : The results indicated that 40 Hz MC had an effect on reducing muscle tone regardless of application timing. However, both 40 Hz and 284 Hz MC did not trigger changes in muscle elasticity and stiffness regardless of application timing.

• Journal of Korean Society for Quality Management
• /
• v.36 no.3
• /
• pp.76-86
• /
• 2008

This paper examines when a consumer in existent telecommunication 2G applies to new telecommunication service 3G from the viewpoint of an option pricing theory. To improve telecommunication quality of service, the consumer applies to 3G. The application means an exchange of 2G for 3G with extra costs such as searching and conversion costs. Since the option to exchange is a right that the consumer can exercise or not, application to 3G is deemed an exercise of the option to exchange at most suitable value of the option. The timing to exercise the option depends on the extra costs and the additional communication benefit from new telecommunication quality of service. These affect an optimal timing to apply to 3G. The optimal applying or switching timing to 3G is when an economic value of the option to exchange is equal to an economic value of the extra costs plus the additional telecommunication quality from new telecommunication service. The option analysis used in this paper is applicable to various industries.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.65-69
• /
• 2001

Research on the development of CNG dedicated engine that has important meaning both as a clean fuel and an alterna- tive energy to reduce the exhaust emission from diesel engine are actively going on these days. In this study, in order to present the direction and application of CNG engine, we tested the CNG engine performance experimented by changing the parameters such as ignition timing, equivalent ratio. The engine performance experimented by changing the parameters such as ignition timing, equivalent ratio. The engine performance and exhaust emission were measured by engine performance model at maximum load condition with increasing the rpm in the range of 1,000∼2,200rpm. Also, the testing engine was heavy-duty CNG dedicated engine with displacement of 11,050cc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.3
• /
• pp.564-570
• /
• 2006

This paper presents a new real-time system design methodology for embedded system as well as event-driven real time application. It is required to implement a deadline handling mechanism in order to satisfy a large-scale distributed real time application. When we design real time system, it has handled a deadline and is important to measure / control a timing issue. These timing constraints usually associated with an interface between model and system. There are many case tools that supporting a real time application, for example, UML, graphic language for designing real time system, but they cannot provide efficient way to handle deadline miss. Therefore, users have to design deadline handler manually when they need to use it. This paper contributes solving the problems of user-level deadline handling for an embedded system. Also, it also discusses an efficient deadline handler design mechanism using on RoseRT, which is a graphical CASE tool supporting from UML.