• Journal of Astronomy and Space Sciences
• /
• v.31 no.3
• /
• pp.265-276
• /
• 2014

The application of software engineering is not common in the development of astronomical observation system. While there were component-wise developments in the past, large-scale comprehensive system developments are more common in these days. In this study, current methodologies of development are reviewed to select a proper one for the development of astronomical observation system and the result of the application is presented. As the subject of this study, a project of operation software development for an astronomical observation system which runs on the ground is selected. And the output management technique based on Component Based Development which is one of the relatively recent methodologies has been applied. Since the nature of the system requires lots of arithmetic algorithms and it has great impact on the overall performance of the entire system, a prototype model is developed to verify major functions and performance. Consequently, it was possible to verify the compliance with the product requirements through the requirement tracing table and also it was possible to keep to the schedule. Besides, it was suggested that a few improvements could be possible based on the experience of the application of conventional output management technique. This study is the first application of the software development methodology in the domestic astronomical observation system area. The process and results of this study would contribute to the investigation for a more appropriate methodology in the area of similar system development.

• Journal of Multimedia Information System
• /
• v.7 no.2
• /
• pp.107-114
• /
• 2020

This paper proposes a wearable audio book application using two wearable devices, a smartwatch and a hearables. We review requirements of what could be a killer wearable application and design our application based on these elicited requirements. To distinguish our application, we present 7 scenarios and introduce several wearable interaction modalities. To show feasibility of our approach, we design and implement our proof-of-concept prototype on Android emulator as well as on a commercial smartwatch. We thoroughly address how different interaction modalities are designed and implemented in the Android platform. Lastly, we show latency of the multi-modal and alternative interaction modalities that can be gracefully handled in wearable audio application use cases.

• Journal of Multimedia Information System
• /
• v.8 no.4
• /
• pp.243-250
• /
• 2021

Instructional contents are used to demonstrate a technical process to teach and walkthrough certain procedures to carry out a task. This type of informational content is widely used for teaching and lectures in form of tutorial videos and training videos. Since there are questions and uncertainties for what could be the killer application for the novel wearables, we propose a self-instruction training application on a smart glass to utilize already-available instruction videos as well as public open data in creative ways. We design and implement a prototype application to help users train by wearing smart glasses specifically designed for two concrete and hand-constrained use cases where the user's hands need to be free to operate. To increase the efficiency and feasibility of the self-instruction training, we contribute to the development of a wearable killer application by integrating a voice-based user interface using speech recognizer, public open data APIs, and timestamp-based procedural content navigation structure into our proof-of-concept application.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1995.04a
• /
• pp.160-169
• /
• 1995

This study presents an application of object-oriented methodology for structural dcsign process. A prototype system of integrated a structural design system is developed by introducing a structural analysis object model(SAOM) and structural design object model(SDOM). The SAOM module. which is modeled as a part of structural member, performs structural analysis using FEM approach and the SDOM module checks structural members based on Korea steel design standard. Above mentionedmodelsareabstraclencapsulatibleandreusable.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.301-302
• /
• 2005

A low-power gate driver IC, which can be used for TFT-LCD application, is proposed. The short-circuit current of the output buffer is greatly reduced. An experimental prototype gate driver implemented in a $0.35-{\mu}m$ CMOS technology demonstrates that the power reduction of 16 % is obtained.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.122-124
• /
• 2001

This Paper presents an application technique for solving the Security Constrained Economic Dispatch(SCED) problem using the Interior Point Method. The optimal power flow solution is obtained by optimizing the given generation cost objectives function subject to the system security constraints. The proposed technique is applied to a prototype 6-bus system for evaluation and test.

• IE interfaces
• /
• v.12 no.1
• /
• pp.158-165
• /
• 1999

One solution to the estimation of product reliability during the development phase is to measure reliability improvement over time and compare this improvement to previous product development progress. This paper presents the reliability growth theory and applies it to some subsystems of vehicles during their design, development and prototype testing. The data presented illustrates explicitly the prediction of the reliability growth in the product development cycle. The application of these techniques is a part of the product assurance function that plays an important role in product reliability improvement.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.609-616
• /
• 2018

The purpose of this study is to describe the technologies necessary to design responsive web with the use of the responsive website based on implementation structure as a prototype. Responsive design means the process of analyzing prototype requirements on the basis of implementation and applying the analysis results to development. The design method based on the principle of priority in development was established, and then flexibility and variability through design formula were set up. After that, the user-oriented primary principle and secondary principle were drawn to establish implementation structure. In the way of discussing compression technologies, a method of combination was searched for, and then a method of asynchronous script scalability in line with a web prototype was found. Today, a website or a web application needs to be adopted and accessed regardless of device types. As a solution, a responsive website design method was found. Important technologies for the implementation structure for the responsive website design method and its relevant prototype website were came up with.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.556-563
• /
• 2002

In this paper, a novel method for designing an M-channel, causal, stable IIR cosine-modulated filter bank (CMFB) with near PR property is proposed. The IIR prototype filter is designed with a simple constraint using lattice stucture with 1st order allpass filter components. The IIR prototype filter which is designed by the proposed method has higher stopband attenuation and sharper roll-off characteristic than the one which is designed by the previously proposed method with similar complexity. The proposed M-channel IIR CMFB which is designed from this IIR prototype filter is applied to subband acoustic echo canceller (AEC). We obtained about 15dB higher ERLE using this subband AEC than when M-channel FIR subband AEC with similar complexity.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.4
• /
• pp.325-335
• /
• 2021

Chronic diseases have been increasing recently as the average life expectancy of humans has been extended, and this trend has caused problems such as the widespread demand for health and rehabilitation services and rising medical costs. In order to solve this problem, the community-based rehabilitation has been developed and strengthened in Korea and gradually promoted since 2019. It is important to secure access to clients who want to use services to revitalize community-based rehabilitation. So in this study, as part of the community-based rehabilitation, intends to devise smartphone applications designs and develop a prototype to secure access to community-based occupational therapy services based on occupation and activities. For Occupational Therapy Practice Framework (OTPF), International Classification of Functioning, Disability and Health (ICF), and Allen Diagnostic Module-2 (ADM-2) were used to devise and categorize occupation and activity based application content, and link OTPF, ICF, and ADM-2 through prior research analysis and expert meetings. The derived content was visualized through literature review and activity analysis, and was implemented to enable direct playback within the application using the YouTube API, and finally developed a prototype application. The Android Studio 3.5.2 for Windows 64-bit was used to build the application prototype. In further research, converging various digital technologies for user convenience and additionally researching community-based occupational therapy service providers opinions and service user satisfaction will improve accessibility to community-based occupational therapy services for clients who have difficulty occupational performance in the community.