• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.21 no.6
• /
• pp.65-71
• /
• 2019

In Korea, there is a lack of adequate safety management for small-scale construction work, particularly when compared to large-scale construction projects. The number of construction disasters is also higher on small-scale construction sites. In this regard, this study aimed to develop the application prototype to support the safety management of small-scale construction projects. The major findings of the research are as follows. 1) About 60% of construction disasters and death occurred on small-scale construction sites over the last two years. In addition, institutional support and costs for safety management were found to be insufficient. 2) The items of the application for the small-scale construction safety management were constructed on the basis of the safety management of large-scale construction work. The contents of the application were confirmed based on a survey of small-scale construction project managers. 3) The application algorithm was developed with a focus on the roles of management subjects and information exchange. For transition from the application prototype presented in this study to a commercial product, further research needs to be conducted regarding the reflection of user requirements and application management subjects.

• Archives of design research
• /
• v.13 no.3
• /
• pp.181-190
• /
• 2000

As human-centered design has become new paradigm in the whole field of design, they make an effort to understand users in the field of graphic interface design. However, there are not much of study to systematic process for human-centered approach in graphic interface design. Therefore, in this paper, the study was conducted to develop application methodology of prototype in the graphic user interface design process. The study consists of three sections. first, definition, types and application methods are introduced by secondary research. Second, all the knowledge gathered above by secondary research are integrated in the newly proposed Prototype-based interface design process. There are many types of prototype from idea sketches on the paper to final working prototype realized by computer. It is needed to develop and test appropriate prototype with appropriate techniques by objectives of the stages. Finally, the proposed prototype-base design process is verified and exemplified through the process of using prototype in the development of multi-user educational multimedia product.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.4
• /
• pp.487-492
• /
• 2011

In this paper, we proposed a new design methodology to improve the classification performance of the Nearest Prototype Classifier which is one of the simplest classification algorithm. To optimize the position vectors of the prototypes in the nearest prototype classifier, we use the differential evolutionary algorithm. The optimized position vectors of the prototypes result in the improvement of the classification performance. The new method to determine the class labels of the prototypes, which are defined by the differential evolutionary algorithm, is proposed. In addition, the experimental application covers a comparative analysis including several previously commonly encountered methods.

• Transactions of Materials Processing
• /
• v.7 no.6
• /
• pp.603-609
• /
• 1998

An aluminium sandwich sheet is the material fabricated by adhering two aluminum panels to one plastic core. When it has the same bending stiffness as an steel panel it is 65% lighter than steel panel and 30% lighter than aluminum panel. Therefore it is notified exclusively as good substitutive materials for steel body to improve fuel efficiency. An aluminium sandwich sheet, however, has a problem of the lower formability than steel in automotive application. In this paper we intend to develop application technologies of an aluminum sandwich sheet for auto body panels from selecting composed materials of aluminium sandwich sheets to fabricating prototype. We selected aluminium sandwich panels fabricated by Hoogovens company. Through formability tests we have designed the hood part on auto body panels and fabricated a mould and a prototype.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.06a
• /
• pp.38-39
• /
• 2020

Currently, attempts are being made to introduce innovative teaching methods in architectural engineering education. However, there is still a lack of research supporting self-directed learners. In this regard, this study sought to develop an application prototype to support learning from online lectures on architectural engineering and conduct prototyping for its evolution. Menus in the application prototype consisted of four main categories: lecture operation, video lectures, eBooks and past exam questions. The lecture operation was classified into eight sub-categories, including assignment submission and notice, so as to support interactions between instructors and learners as well as confirmation of the delivery methods. With respect to video lectures, assignment submissions and notice functions, prototyping connecting the mobile web was implemented to enhance user convenience.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.94-100
• /
• 2008

Present chemical application method using a power sprayer has been labor intensive, costly and ineffective. Therefore, a small agricultural unmanned helicopter was suggested to replace the conventional spray system. In this study, conceptual design for developing the helicopter and a consequential prototype were reported. The overall conceptual design was initiated by deciding the type of agricultural helicopter, as the single rotor helicopter with a tail system. As the first step of the designing, an air-cooled, 2-stroke engine was selected and a prototype transmission was designed by determining the rotating speed of main rotor shaft. A 'pusher' type tail rotor system was adapted to balance the reaction torque and reduce the power use. The tail boom length was designed to avoid the rotating trajectory of the main rotor. The RF console consisted of the engine control, attitude control, and emergency control modules. Assembling the prototype concluded the mechanical development of the agricultural helicopter.

• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.411-419
• /
• 2009

This study was carried out to develop a shredding-burying machine for application of gramineae green manure crops that were tall and had high biomass yield such as sudan grass and rye. We made a prototype to operate both shredding and burying concurrently to attach at middle-sized tractors. Field tests were performed with the prototype to treat rye and sudan grass. The test results showed that the average cutting length became shorter and the quantity of entwined stem became obviously decreased when the PTO shaft speed was fast and running speed was slow. Also, We found, when the cut stem length became shorter, the burying ratio became more increasing and the PTO power requirement became more decreasing. Working efficiency of the prototype was better than conventional Rotary. The test results for treating rye/sudan grass with prototype showed that average cutting length was 21.2/22.5 cm and burying ratio was 98.4/98.1% when the PTO shaft speed was 1,000/1,000 rpm and running speed was 0.25/0.17 m/s. Also, the working performance of the prototype was 0.79 and 1.14 h/10 a for rye and sudan grass, respectively. Finally, we found that the prototype of shredding-burying machine was better for labor than conventional method that required at least 3 times bigger tractor.

• Journal of the korean Society of Automotive Engineers
• /
• v.14 no.4
• /
• pp.68-78
• /
• 1992

Vibration and vibro-acoustic characteristics of body panels enclosing the vehicle interior cabin are tested and analyzed for effective application of sound proofing materials. A set of deadener and insulation packages are proposed based on the experimentally evaluated and categorized contributions of noise radiating panels. The suggested packages are applied to a prototype vehicle, and a refined acoustic quality is achieved. A systematic experimental procedure proposed in this study can be a good tool in tuning the acoustic quality of prototype vehicles within a limited development period.

• Archives of Plastic Surgery
• /
• v.42 no.3
• /
• pp.267-277
• /
• 2015

Three-dimensional (3D) printing has been particularly widely adopted in medical fields. Application of the 3D printing technique has even been extended to bio-cell printing for 3D tissue/organ development, the creation of scaffolds for tissue engineering, and actual clinical application for various medical parts. Of various medical fields, craniofacial plastic surgery is one of areas that pioneered the use of the 3D printing concept. Rapid prototype technology was introduced in the 1990s to medicine via computer-aided design, computer-aided manufacturing. To investigate the current status of 3D printing technology and its clinical application, a systematic review of the literature was conducted. In addition, the benefits and possibilities of the clinical application of 3D printing in craniofacial surgery are reviewed, based on personal experiences with more than 500 craniofacial cases conducted using 3D printing tactile prototype models.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.429-432
• /
• 2000

Test methods by hydraulic oil or vehicular live load have been used for structural evaluation of prototype bridge. However it has been reported that the use of hydraulic jack has some disadvantages for the view of safety and economy, and the complete structural evaluation through each loading state can not be accomplished blocks is presented to overcome those demerits. To verify the application and safely of the use of concrete weight blocks during each loading state, it is applied to prototype deteriorated bridge. As a result, it could be evaluated the structural behavior completely using the concrete weight blocks