• Journal of Environmental Impact Assessment
• /
• v.23 no.2
• /
• pp.88-100
• /
• 2014

This study analyzed runoff characteristics of non-point sources pollutant and evaluated removal of pollution by BMP(Best Management Practice) using BASINS/WinHSPF model. Hourly meterological data including input data was provided from 2010 to 2011 year to run HSPF model in Miho stream watershed. As the results of calibration and validation of the model, the model could be successfully performed to simulate the flow and water quality parameters. The apprehensive area of non-point source pollution was chosen by non-point source pollution per area of a tributary to the Miho stream and applied constructed wetland in area chosen. Three scenarios were based on installation area of an constructed wetland and HSPF model would be applied to estimate the pollutant removals through the constructed wetland. The removal rates of pollutants through the constructed wetland were estimated with the runoff and water quality parameters by the comparisons of before and after the constructed wetland application.

• Journal of Korean Society of Rural Planning
• /
• v.9 no.4 s.21
• /
• pp.43-51
• /
• 2003

This study aims to integrate the simulation models for rural settlement planning (SimRusep) in the district level (Myon) area of rural counties. The SimRusep, which has two modules of key villages selection and spatial planning for the selected villages, consists of four sub-models such as the spatial location-allocation model of center villages (SLAMCV), the potential centrality evaluation model (PCEM), the land use planning model (LUPM), and the 3-dimensional spatial planning modeller (3DSPLAM). Basically, map data of the integrated system which can be operated on the UNIX environment is inputted and treated using GIS (ARC/INFO) and then its village planning results is graphically presented on the AutoCAD. In order to verify the practical applicabilities of the SimRusep, an administrative area, Ucheon-myun, HoengSung-gun, KangWon-do, was selected as a case study area. It was well operated in the strategic application trials considering application of each sub-model in the study area. The operation results of the SimRusep showed the possibilities of realtime simulation from the selection of key village to its final stereoscopic presentation of planned results. Alternative village plan proposals can be swiftly drafted, which means very practical support for decision making process and public participation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.635-644
• /
• 2005

This paper is. a study on relation between road traffic noise(RTN) and sound power level(PWL). At present, many experimental formulae and prediction formulae are used for prediction of RTN. But these formulae are difficult to appiy to the metropolitan area because these formulae are inaccurate in the different condition from reference condition. This paper calculate RTN and PWL of each prediction formula, choose the best one and make a noise map of the subject area. Procedure is as follows. First, calculate $L_{eq}$ of RTN using experimental formulae and prediction formulae. Second, calculate PWL using $L_{eq}$ of RTN and distance attenuation for point source at semi-free field. Third, choose the most accurate formula. And finally, make a noise map of the subject area at present and future. The result using noise map will be able to apply to application field. Noise mapping tool used on this paper is Raynoise program using Ray Tracing Method(RTM), Mirror Image Source Method(MISM) and Hybrid Method(HM).

• Journal of Biomedical Engineering Research
• /
• v.26 no.5
• /
• pp.331-335
• /
• 2005

The fusion technology of small sensor and wireless communication was followed by various application examples of the embedded system, where the social infrastructural facilities and ecological environment were wirelessly monitored. In addition, this technology represents the primary application area being extended into the healthcare field. In this study, a body area network for ubiquitous healthcare is presented. More specifically this represents a wireless biomedical signal acquisition device characterized by small size, low power consumption, pre-processing and archiving capability. Using this device, a new method for monitoring vital signs and activity is created. A PDA-based wireless sensor network enables patients to be monitored during their daily living, without any constraints. Therefore, the proposed method can be used to develop Activities of Daily Living (ADL) monitoring devices for the elderly or movement impaired people. A medical center would be able to remotely monitor the current state of elderly people and support first-aid in emergency cases. In addition, this method will reduce medical costs in society, where the average life expectancy is increasing.

• Journal of the Ergonomics Society of Korea
• /
• v.33 no.3
• /
• pp.229-239
• /
• 2014

Objective: This research provides a guideline for working area design in the electronic industry, considering gender differences of physical characteristics. Background: Co-work in the electronic industry requires workers of various physical properties to work cohesively in the conveyor line for mass production. This stresses the need for a worker-centered design of the workplace convenient for all the workers. Method: In this research, the $6^{th}$ Size Korea (National Anthropometric Survey in Korea) report is referred to obtain the design measurements according to age and gender varieties. This information is used to provide the working area guideline concerning conveyor line workers of both genders aged 20 to 40. Results: Physical properties of workers and workplace design principles were obtained for application in the assembly, inspection, and material handling process in the electronic industry. Conclusion: Applying ergonomic design principles can provide safe and comfortable workplace for both genders. Application: This research can be fundamentally used in designing worker-centered workplaces.

• Nuclear Engineering and Technology
• /
• v.37 no.3
• /
• pp.259-264
• /
• 2005

This paper presents a vital area identification (VAI) method based on the current fault tree analysis (FTA) and probabilistic safety assessment (PSA) techniques for the physical protection of nuclear power plants. A structured framework of a top event prevention set analysis (TEPA) application to the VAI of nuclear power plants is also delineated. One of the important processes for physical protection in a nuclear power plant is VAI that is a process for identifying areas containing nuclear materials, structures, systems or components (SSCs) to be protected from sabotage, which could directly or indirectly lead to core damage and unacceptable radiological consequences. A software VIP (Vital area Identification Package based on the PSA method) is being developed by KAERI for the VAI of nuclear power plants. Furthermore, the KAERI fault tree solver FTREX (Fault Tree Reliability Evaluation eXpert) is specialized for the VIP to generate the candidates of the vital areas. FTREX can generate numerous MCSs for a huge fault tree with the lowest truncation limit and all possible prevention sets.

• Journal of Electrochemical Science and Technology
• /
• v.1 no.1
• /
• pp.25-30
• /
• 2010

This study demonstrated the synthesis of high-surface-area metal-free carbonaceous electrodes (CE) from anodic aluminum oxide (AAO) templates, and their application as supercapacitors. Multi-walled Carbon nanotubes (MWCNTs) were interwoven into a porous network sheet that was attached to one side of AAO template through a vacuum filtration of the homogeneously dispersed MWCNT toluene solution. Subsequently, the conducting polymer was electrochemically grown into the porous MWCNT network and nanochannels of AAO, leading to the formation of a carbonaceous metal-free film electrode with a high surface area in the given geometrical surface area. Typical conducting polymers such as polypyrrole (PPY) and poly(3,4-ethylenedioxythiophene) (PEDOT) were examined as model systems, and the resulting electrodes were investigated as supercapacitors (SCs). These SCs exhibited stable, high capacitances, with values as high as 554 F/g, 1.08 F/$cm^2$ for PPY and 237 F/g, 0.98 F/$cm^2$ for PEDOT, that were normalized by both the mass and geometric area.

• Korean Institute of Interior Design Journal
• /
• no.36
• /
• pp.136-142
• /
• 2003

This study suggest the development and application of the Interactive Design Toolkit as a participatory design method for general customer with the application of the Augmented Reality. The Toolkit is based on a PC-based image perception system and user can make virtual models and navigate in the virtual space by manipulating physical objects directly in real world. The toolkit can be used in the field of participatory design in systematically modularized and customizable design area including model house of apartment and system kitchen furniture. More improved design toolkit for enhancing reality and providing various Interaction method Is needed hereafter.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2001.05a
• /
• pp.39-44
• /
• 2001

An instance of domestic exhibition facility building case, the shortage of managing personal in construction resulted serious issue on expenses, times, quality, and safty with no satisfaction on its process and result. According to subject's speciality the CM's application methods are varied and because of its speciality, overall process of building an exhibition facility operating by its owner. This study intends to exam a application possibility of CM on exhibition facility construction to make smooth communication among varied area that following to exhibition facility construction.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.49 no.3
• /
• pp.194-198
• /
• 2004

This study was conducted to identify the appropriate nitrogen fertilizer application rate for improving rice quality in tidal reclaimed area, at the Gyehwado substation of the Honam Agricultural Research Institute during 2002-2(103. The experimental fields contained 0.1% (low salinity) and 0.3-0.4% (medium salinity) Nacl in soil solution. Plant height at panicle formation stage was tall ay heavy nitrogen level and the effect of heavy nitrogen was higher in low than in high soil salinity condition. Heading date was not affected by applied nitrogen levels from 8 to 16 kg/10a in low soil salinity condition but it was one day later in 24 kg/10a nitrogen level when compared with the standard nitrogen level,20 kg/10a. In middle soil salinity condition, the heading date was one day earlier in 8 to 16 kg/10a and similar in 24 kg/10a, when compared with 20 kg/10a nitrogen level. And also it was four days later in middle than in low soil salinity condition. In low soil salinity condition, grain number $\textrm{m}^2$ increased but ripened grain ratio decreased as the nitrogen application increased and finally, milled rice yield was not different among heavy nitrogen application levels compared with 12 kg/10a. Head rice ratio was high and protein content was low in 12 kg/10a or lower nitrogen level. In middle soil salinity condition, grain number $\textrm{m}^2$ increased and ripened grain ratio was not affected as the nitrogen application increased. And finally, milled rice yield increased with increasing nitrogen application levels, Head rice ratio was high and protein content was not affected by nitrogen application levels. Therefore, on the basis of milled rice yield and rice grain quality inreclaimed land, the appropriate nitrogen application level would be 12 kg/10a in low soil salinity condition and 20 kg/10a in middle soil salinity condition.