• Korean Journal of Agricultural Science
• /
• v.39 no.4
• /
• pp.497-502
• /
• 2012

Since the year 2000, the production and consumption of broccoli have rapidly increased in Korea. And, the average production area and amount were about 1,700 ha and 29,000 ton for the past 5 years. Even with the increase of these cultivation and consumption, more than 95% of the broccoli seeds are currently imported from foreign countries such as Japan and Netherlands. Therefore, development of domestic broccoli varieties is needed to relieve Korean farmers' production cost for broccoli. In this situation, National Institute of Horticultural and Herbal Science (NIHHS) of Korea has tried to develop F1 hybrid varieties from elite lines that were obtained by microspore cultivation method from 2008. As the results, about 850 lines of broccoli were obtained and self-pollinated. Then their ploidy levels of the genome were confirmed to select double haploid (D.H.) lines. And the D.H. lines' horticultural traits were evaluated in open field. After the selection of 17 elite D.H. lines, they were cross-pollinated with a male sterile (MS) line to produce F1 hybrid seeds. After 2 to 3 years field trials of these F1 hybrid varieties at the area of Suwon, Gangneung, and Jeju respectively, two hybrid varieties such as 'Wongyo8011' and 'Wongyo8012' are selected for the application of variety protection. With these 4 years of research, we found that the microspore cultivation method is a powerful tool for the conventional breeding program, especially for the development of various inbred lines and even F1 hybrid varieties in short time.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.152-163
• /
• 2007

The on-going pre-environmental investigation at present is performed by separate numerical analysis of each provision which makes integrated pre-environmental investigation is difficult. The application of numerical data is insufficient, which results to the deterioration of environmental investigation result's objectivity. A lot of time and money is required for the investigation. In this study, the spacial analysis function of GIS was applied on the 8 pre-environmental investigation factors. Pre-environmental investigation GIS DMS(Decision Making System) using AHP was constructed to make integrated investigation possible through the use of investigation results for each factor. Through the use of the developed pre-environmental investigation GIS DMS and the pre-constructed GIS data, the objectivity of environmental investigation is sufficient and time and cost are reduced. Therefore, this system can be used for pre-environmental investigation during route selection in the initial stages of road construction. Through the numerical and visual data obtained from the system developed in this paper, it is easier to gain the approval of the public. Furthermore, environmental problems due to road construction can be investigated with less time and money during the initial stages of road construction.

• Geophysics and Geophysical Exploration
• /
• v.18 no.4
• /
• pp.197-206
• /
• 2015

The purpose of this study is to ensure microseismic data acquisition technique for hydraulic fracturing imaging at the site of shale gas development. For this, microseismic data acquisition was performed during hydraulic fracturing and artificial blasting at a site bearing shale layers. Measured microseismic event data during the hydraulic fracturing have the very small amplitude of 0.001 mm/sec ~ 0.003 mm/sec and the frequency contents of 5 Hz ~ 20 Hz range. Meanwhile microseismic event data acquired during artificial blasting have the bigger amplitude (0.011 mm/sec ~ 0.302 mm/sec) than hydraulic fracturing event data and their frequency contents have the range of 5 Hz ~ 2 kHz. For microseismic data acquisition design, the selection of appropriate instrumentation including sensors and the recording system, the determination of sensor array and the deployment range were investigated based on the theoretical data and field application experiences.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.245-251
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GSIS field. Also, the needs fer the integration of land and building information are widely increasing for integral-management and its application of various land related information. Through a revision of cadastral laws to replace the existing 2D-Cadastre with the 3D-Cadastre, a legal basis to register the position of buildings and facilities is prepared in the governmental or civil fields. This paper presented 3D-Cadastre theory that has been studied on Europe and surveyed building position directly with Totalstation at cadastral control point after choosing pilot test area, Also, the most efficient surveying method of registering building in a cadastral map is presented with comparing and analyzing building position after surveying digital orthophoto and digital map. And it is constructed a 3D information cadastral map model that can make the integral management of land, building, connecting land recorders, building management ledgers, building titles, building pictures, and related attribute information.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.6
• /
• pp.761-768
• /
• 2009

GPS data acquired at CORS are widely and rapidly used in many application such as information technology industries. In acquisition of GPS data the establishment of standards of reliability and tolerance error range is necessary. This standards is regarded to contain the requirements of selection of using softwares, precise and broadcast ephemeris, duration of data acquisition, and etc. This study focused to present above standards of tolerance error. In long baseline GPS observation network the RMSE analysed in this study resulted little change when data acquired in 6-hour duration, but the less observation duration resulted less accuracy. Especially in 3-hour observation the accuracy of GPS data decreased rapidly. After analyses of data accuracy in the same observation condition using different computer program between academic and commercial purpose software, the RMSE of academic software resulted less than 1cm compared to 3 to 10cm from commercial software. RMSE analysis between precise ephemeris and broadcast ephemeris resulted similar quantity. Therefore this study regarded to present the reliable establishment of standards of error which can be used in required accuracy in GPS data observation.

• Korean Journal of Food Science and Technology
• /
• v.44 no.1
• /
• pp.114-120
• /
• 2012

The purpose of this study was to evaluate the antibacterial activities of chopping boards made of various materials such as three antibiotic plastics, a general plastic, and various woods (red pine, rubber tree, cypress, birch, and bamboo) using zone inhibition assay and real-time PCR. Wood chopping boards showed high antimicrobial activity against Vibrio vulnificus, while plastic chopping boards showed high antimicrobial activity against Escherichia coli O157:H7, Salmonella Typhimurium, and Staphylococcus aureus. Bamboo chopping board among the wood chopping boards showed the highest antimicrobial activity against five foodborne bacteria such as E. coli O157:H7, S. Typhimurium, Vibrio cholerae, and V. vulnificus. These results may be helpful in the selection of a chopping board with high antimicrobial activity and in the application of hygiene procedures for prevention of cross-contamination.

• Journal of Life Science
• /
• v.26 no.6
• /
• pp.737-748
• /
• 2016

By this time, insect antimicrobial peptides (AMPs) have been characterized more than 150 peptides since purification of cecropin in the hemolymph of pupae from Hyalophora cecropia in 1980. Therefore, it is considered that insects are good sources of AMP selection. Insect AMPs are small (low molecular weight) and cationic, and amphipathic with variable length, sequence, and structure. They perform a pivotal role on humoral immunity in the insect innate immune system against invading pathogens such as bacteria, fungi, parasites, and viruses. Most of the insect AMPs are induced rapidly in the fat bodies and other specific tissues of insects after septic injury or immune challenge. Then the AMPs subsequently released into the hemolymph to act against microorganisms. These peptides have a broad antimicrobial spectrum against various microbes including anticancer activities. Insect AMPs could be divided into four families based on their structures and sequences. That is the α-helical peptides, cysteine-rich peptides, proline-rich peptides, and glycine-rich peptides/proteins. For instance, cecropins, insect defensins, proline-rich peptides, and attacins are common insect AMPs, but gloverins and moricins have been identified only in lepidopteran species. This review focuses on AMPs from insects and discusses current knowledge and recent progress with potential applications of insect AMPs.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.181-187
• /
• 2006

In this study, problems related with pH control in electrokinetic(EK) bioremediation of phenanthrene contaminated soil were observed, and the effects of pH control methods on the removal efficiency were investigated to search a further application strategy. In a preliminary experiment, it was found out by flask cultivation that a certain sulfate concentration was needed to degrade phenanthrene well using Sphingomonas sp. 3Y. However, when $MgSO_4$ was used as sulfate source in EK bioremediation, the bacterial activity reduced seriously due to the abrupt decrease of pHs in soil and bioreactor by the combination of magnesium and hydroxyl ions. When another strong buffering compound was used to control the pH problem, the good maintenance of the bacterial activity and pHs could be observed, but the removal efficiency decreased largely. When a low concentration of $MgSO_4$ was added, the removal efficiency decreased somewhat in spite of the good maintenance of neutral pHs. With the addition of NaOH as a neutralizing agent, the removal efficiency also decreased because of the increase of soil pH. Consequently the selection of electrolyte composition was a very important factor in EK bioremediation and some sulfate sources suitable for both bacterial activity and contaminant degradation should be investigated.

• The Korean Journal of Ecology
• /
• v.25 no.4
• /
• pp.253-259
• /
• 2002

Application of phytoremediation in the polluted area to remove undesirable materials is a complex and difficult subject without detailed investigation and experimentation. We investigated the accumulation patterns of cadmium and lead in plants naturally grown, the bioavailability of plants to accumulate these toxic metals and the responses of P. thunbergii to cadmium and lead. The soil samples contained detectable lead (＜$17.5_\mu$g/g), whereas cadmium was not detected in the soils of study area. The whole body of Persicaria thunbergii contained detectable lead (＜320.$8_\mu$g/g/g) but cadmium was detected only in the stem (＜7.$4_\mu$g/g/g) and root (＜10.$4_\mu$g/g/g) of P. thunbergii. Cadmium was not detected in Trapa japonica and Nymphoides peltata, whereas lead was detected in T. japonica (＜323.$7_\mu$g/g/g) and N. peltata (＜177.$5_\mu$g/g/g). Correlation coefficient between lead content in soil and in these plant samples represented positive correlation. The total content of lead in each plant sample increased in the order of N. peltata$\leq$P. thunbergii

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.70-76
• /
• 2017

Among the forest road pavement methods, the majority of current constructions utilize concrete pavements but it has disadvantages as follows: many cracked concrete pavements generated by the erosion of underlying soil layers, could not be used as forest roads in steep slope during winter, and cement contains hazardous chemicals (hexavalent chromium, etc.). In order to supplement the limitations of the use of concrete pavement, this study was conducted to investigate the operation process and cost, the strength and compaction of the experimental forest road pavement(85 m) utilizing eco-friendly solidification material at Goryeong-gun, Gyeongsangbuk-do. The work elements of experimental forest road paving were classified into: preparation, Roadbed excavation, Roadbed grading, subgrade compaction, form work, collection and selection of site soil, mixing site soil and eco-friendly solidification material, paving by eco-friendly solidification material, compaction by vibrating roller and curing. The result of economic analysis using construction cost shows that for concrete costs total to $38,681won/m^3$ while for the eco-friendly paving material it is $38,245won/m^3$. Thus the construction costs for concrete and the eco-friendly paving material are similar. And the results of the Schmidt Hammer test for strength analysis by curing period are 10.5-13.5 MPa for 7 days, 18.1-22.7 MPa for 14 days, and 20.8-23.0 MPa for 28 days.