• Title/Summary/Keyword: Application Rate

Search Result 6,996, Processing Time 0.036 seconds

CHANGES IN AUTONOMIC RESPONSES AND JAW MUSCLE ACTIVITY INDUCED BY TOOTH PULP STIMULATION IN THE RAT (쥐의 치수자극에 의해 유발되는 자율신경 반응과 악안면 근육활동의 변화)

  • Yu, Mi-Kyung;Park, Soo-Joung
    • Restorative Dentistry and Endodontics
    • /
    • v.24 no.4
    • /
    • pp.657-665
    • /
    • 1999
  • The effects of application of mustard oil (MO), a small-fiber excitant and inflammatory irritant into the rat maxillary molar tooth pulp on arterial blood pressure and heat race, and electromyographic (EMG) activity of the jaw muscles were assessed in the anesthetized rats. In addition, Evans blue extravasation following pulpal MO application was measured. Application of MO into the tooth pulp produced a significant increase in mean arterial pressure and heat rate which gradually returned to baseline level. Application of MO into the tooth pulp induced a significant and short-lasting increase in EMG activity of digastric masseter and tongue muscle. Application of MO into the tooth pulp significantly increased the plasma extravasation of Evans blue dye. However, Application of mineral oil into the tooth pulp did not produce any significant changes in EMG activity of the digastric, masseter and tongue muscles, mean arterial pressure and heart rate, and plasma extravasation of Evans blue dye. These findings indicate that changes in arterial blood pressure, heart rate, jaw muscle activity and plasma extravasation accompanying noxious tooth pulp stimulation call be utilized as indirect measure of orofacial pain and inflammation.

  • PDF

Comparison of Skin Stimulation Method and Topical Anesthetic Cream on Pain and Heart Rate Variability during Arteriovenous Fistula Puncture in Hemodialysis Patients (혈액투석 환자의 동정맥루 천자 시 피부자극법과 국소마취크림 도포에 따른 통증과 심박변이도 비교)

  • Kang, Hyo Young;Chae, Young Ran
    • Journal of Korean Biological Nursing Science
    • /
    • v.21 no.3
    • /
    • pp.207-216
    • /
    • 2019
  • Purpose: The purpose of this was to compare effects of application of the skin stimulation method and topical anesthetic cream on pain, heart rate variability and satisfaction according to nursing intervention methods during arteriovenous fistula puncture in chronic renal failure hemodialysis patients. Methods: This study was a crossover design. Participants were 36 patients with chronic renal failure receiving hemodialysis treatment. Two forms of intervention were applied to participants, and then pain and heart rate variability were measured during the puncture. Results: There were no statistically significant differences according to each treatment in vein pain and artery pain. Also, there were no statistically significant differences according to each treatment in stress index, sympathetic activity (LF), parasympathetic activity (HF) and sympathetic activity/parasympathetic activity (LF/HF ratio). Satisfaction with application of skin stimulation method was statistically higher than that of topical anesthetic cream application. Conclusion: This suggests that application of the skin stimulation method complements disadvantages of topical anesthetic cream application and demonstrates possibility of application as a nursing intervention method which can be conveniently used by nurses in clinical practice.

Studies on the Productivity of Individual Leaf Blade of Paddy Rice (수도의엽신별 생육효과에 관한 연구)

  • Dong-Sam Cho
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.18
    • /
    • pp.1-27
    • /
    • 1975
  • Experiment I: A field experiment was conducted in an attempt to find the effect of top-dressing at heading time in different levels of nitrogen application and of different positioned leaf blades formed by the treatment of leaf defoliation at heading time on the ripening and the yield of rice. The results obtained are as follows: 1. Average number of ears per hill and average number of grains per ear in different levels of nitrogen application were increased as the amount of nitrogen applied was increased. while the rate of ripened grains the yield of rough rice and the weight of 1, 000 kernels of brown rice were decreased respectively as the amount of nitrogen applied was increased. 2. The rate of ripened grains and the weight of 1.000 kernels of brown rice in different levels of nitrogen, top-dressing at heading time were larger than those in control and increased. The yield of rough rice although statistically significant differences were not recognized, were numerically increased. 3. The rate of ripened grains, the yield of rough rice, the weight of 1, 000 kernels of brown rice and the rate of hulling in different treatments of leaf defoliation were remarkably decreased as the degree of leaf-defoliation became larger. 4. The rate of ripened grains, the yield of rough rice, the weight of 1, 000 kernels of brown rice and the rate of hulling in different combinations of number of remained leaves positioned differently, formed the order of $L_1(flag leaf)>L_2>L_3>L_4$ when only one leaf blade was remained, and were increased as the positions of leaves were higher when two leaf blades. were, remained. 5. In case of decrease in the number of leaf blades positioned differently, by the treatment of leaf. defoliation, rate of ripened grains, the yield of rough rice, the weight of 1, 000 kernels of brown rice and the rate of hulling were increased as the area of remained leaves became larger and the nitrogen content of a leaf blade was increased. 6. There was a tendency that the increase in the amount of fertilizer application made the rate of ripened grains and the weight of 1, 000 kernels of brown rice reduced in any number of remained leaf blades, but the application of top-dressing at heading. time resulted in the reverse tendency. The yield of rough rice showed a tendency to be increased as the amount of basal dressing and top-dressing increased and for the application of top-dressing at heading time, the yield of rough rice was less at the smaller number of those. 7. The productivity effect of the rate of ripened grains and the yield of brown rice covered by leaf blades was more than 50 per cent and that of the. weight of 1, 000 kernels of brown rice was not more than 1.0 percent. As the amount of nitrogen application increased the. effect of leaf blades on the rate of ripened. grains and the weight of 1, 000 kernels of brown rice was increased. The effect of leaf blades on the weight of brown rice was increased as the amount of basal dressing-application, but the effect was decreased as the amount of top-dressing at heading time increased, 8. The productivity effects of different positioned leaf blades on the rate of ripened grains, the yield of rough rice and the weight of 1, 000 kernels of brown rice were in order of $L_1(flag leaf)>L_2>L_3>L_4$ the productivity effects of $L_1$ and $L_2$ had a tendency to be increased as the amount of nitrogen applied was increased. Experiment II: A field experiment was done in order to disclose the effect of the time of nitrogen application on yield component and the effect of different positioned leaves formed by leaf defoliation at heading time on the rate of ripened grains and the yield of rice. The results obtained are as follows: 1. Average number of ears per hill was increased in the treatment of nitrogen application from basal dressing to 22 days before heading and in the treatment of application distributed weekly. Number of grains was increased in the treatment of nitrogen application from 36 days to 15 days before heading. The rate of ripened grains was, lower in the treatment of nitrogen application from top-dressing to 15 days before heading than in that of non-application, was higher in the treatment of nitrogen application within 8 days before heading, and was the lowest in that of application 29 days before heading. The yield of rough rice was the highest in the treatment of nitrogen application from 29 days to 22 days before heading. The weight of 1, 000 kernels of brown rice was a little high in the treatment of application from 29 days to 8 days before heading. 2. The rate of ripened grains the yield of rough rice, the weight of 1, 000 kernels of brown rice and the rate of hulling in different treatments of leaf defoliation were remarkably decreased as the degree of leaf defoliation got larger and there were highly significant differences among treatments. There was also a recognized interaction between the time of nitrogen application and leaf defoliation. 3. In relation to the rate of ripened grains, the weight of 1. 000 kernels of brown rice and the rate of hulling in different numbers of remained leaves positioned differently and their combinations, the yield components were in order of $L_1(flag leaf)>L_2>L_3>L_4$ when only one leaf was remained, which indicated that the components were increased as the leaf position got higher. When two laves were remained, the rate of ripened grains, the yield of rough rice and rate of hulling were high in case of the combinations of upper positioned leaves, and the increase in the weight of 1, 000 kernels of brown rice appeared to be affected most]y by flag leaf. When three leaf blades were remained similarly the components were increased with the combination of upper positioned leaf blades. 4. In case of decreased different positioned leaf blades by treatment of leaf defoliation, there was a significant positive regression between the leaf area, the dry matter weight of leaf blades and the nitrogen contents of leaf blades, and rate of ripened grains and the yield of rough rice, but there was no constant tendency between the former components and the weight of 1. 000 kernels of brown rice. 5. The closer the time of fertilizer application to heading time, the more the rate of ripened grains and the weight of 1, 000 kernels was decreased by defoliation, and the less were the remained leaf blades, the more remarkable was the tendency. The rate of ripened grains and the weight of 1. 000 kernels was increased by the top-dressing after heading time as the number of remained leaf blades. When the number of remained leaf blades was small the yield of rough rice was increased as the time of fertilizer application was closer to heading time. 6. Discussing the productivity effects of different organs in different times of nitrogen application, the productivity effect of a leaf blade on the rate of ripened grains was higher as the time of nitrogen application got later, and in the treatment of non-fertilization the productivity effect of a leaf blade and that of culm were the same. In the productivity effect on the yield of brown rice, the effect of culm covered more than 50 percent independently on the time of nitrogen application, and the tendency was larger in the treatment of non-fertilizer. The productivity effect of culm on the weight of 1. 000 kernels of brown rice was more than 90 percent, and the productivity effect of a leaf blade was increased as the time of application got later. 7. The productivity effect of a leaf blade in different positions on the rate of ripened grains, the yield of rough rice and the weight of 1, 000 kernels of brown rice had a tendency to be increased as the time of application got later and as the position of leaf blades got higher. In the treatment of weekly application through the entire growing period, the rate of ripened grains and the yield of rough rice were affected by flag leaf and the second leaf at the same level, the but the weight of 1, 000 kernels of brown rice was affected by flag leaf with more than 60 percent of the yield of total leaves.

  • PDF

Effects of Trinexapac-ethyl on Lodging-related Traits in Transplanted Rice

  • Han, Sang-Wook;Park, Jung-Soo;Cho, Young-Cheol;Lim, Gab-June;Ju, Young-Cheoul
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.44 no.3
    • /
    • pp.186-190
    • /
    • 1999
  • The objective of this study was to ,determine trinexapac-ethyl [4-(cyclopropyl- $\alpha$ -hydroxy-me-thylene)-3,5-dioxocyclohexanecarboxylic acid ethyl ester] effects on lodging-related traits of rice varieties treated at different application rates and times. Trinexapac-ethyl WP was applied at the rate of 10, 20 and 30g ai/l0a to Heukjinjubyeo and Daeanbyeo, respectively. Effects of trinexapacethyl varied greatly with application time as well as application rate with little differences between rice varieties. As the application rate increased, lodging index, center of gravity and exsertion of panicle above flag leaf decreased, whereas breaking strength and phytotoxicity increased. Exsertion of panicle was greatly influenced by the application time with a little difference by application rate. The most effective application time of trinexapac-ethyl based on lodging index and total internode length (Ist-4th node) was 2DBH(days before heading) in Heukjinjubyeo and 17DBH in Daeanbyeo, resulting in reducing total internode length by 12.9 and 9.7cm, respectively. A significant reduction was found at the 1st, 2nd, and 3rd internodes in Heukjinjubyeo, while at the 2nd and 3rd internodes in Daeanbyeo. No significant difference was found among treatments in the panicle length of both rice varieties but the panicle fresh weights of Daeanbyeo were significantly greater in all trinexapac-ethyl treatments compared with that of the control when measured 20 days after heading. Consequently, trinexapacethyl treatment significantly improved lodging-related traits of rice plants without affecting rice yield and yield components.

  • PDF

Effect of Latex Coated Urea on Growth and Yield in Rige Direct Dry Seeding for Water-saving Rice Culture (벼 휴립건답직파 절수재배시 완효성비료 효과)

  • Jae Kil Lee;Moon-Hee Lee
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.47 no.3
    • /
    • pp.221-225
    • /
    • 2002
  • This study was conducted to identify the effects of slow release fertilizer (LCU) on ridge direct seeding on dry paddy of rice as an irrigation water-saying cultural system. During 1999-2000, a series of experiments was carried out at field (Chonbuk series) of the National Honam Agricultural Experiment Station, RDA using Dongjinbyeo. Plant height and culm length during the total growth duration were the longest and panicle umber per $m^2$ was the highest in 100% LCU application rate. Leaf area index and top dry weight were the highest in the 100% LCU application rate. They increased as more LCU was applied. Nitrogen uptake was the highest in 100% LCU application, and N use efficiency was the highest in LCU 60% + FP (fertilization at panicle formation stage) 20% application. Milled rice yield was 7% higher in 100% LCU application rate than that of conventional N application. Ripened grain rate and 1,000-grain weight of brown rice did not differ, but panicle number per $m^2$ and grain number per m2 were the highest at 100% LCU application.

Development of a Variable Rate Granule Applicator for Environment-Friendly Precision Agriculture (III) - Analysis of Pneumatic Conveying System and Improvement of Fertilizer Application Uniformity - (친환경 정밀농업을 위한 입제 변량살포기 개발 (III) -공기이송 시스템 분석과 입제 살포균등도 향상-)

  • Kim, Y.J.;Kim, H.J.;Jang, T.S.;Rhee, J.Y.
    • Journal of Biosystems Engineering
    • /
    • v.31 no.6 s.119
    • /
    • pp.482-488
    • /
    • 2006
  • Application of precision farming technology to rice cultivation could be an effective measure for rice quality improvement and environment-friendly agriculture. This study was conducted to develope a variable rate pneumatic granule applicator. Previous study reported that application uniformity of the prototype machine (C.V. = 23.3%) was not satisfactory. To improve the uniformity, increase of blow-head number from 12 to 16 was suggested. Analysis of the pneumatic conveying system showed that increase of number of blow-head was possible. Three-way variance analysis of the modified applicator showed that inserting length should be changed according to granule metering rate. The range of metering rate from 27.3 to 417.9 g/s were divided into 4 levels and 4 sets of inserting lengths were determined to ensure CV values less than 15%. The revised applicator showed satisfactory C.V. values of 9.4 to 14.6% in the metering rate. Granule conveying pattern was observed using a high speed camera and judged as the homogeneous flow pattern.

Study of Matter Production and Phothsynthetic Characteristics in Wild Vegetable(Chwinamul) (취나물류의 물질생산 및 광합성 특성 I. 취나물류의 포장재배시 차광 및 시비조건에 따른 광합성속도의 차이)

  • 조동하
    • Korean Journal of Plant Resources
    • /
    • v.11 no.1
    • /
    • pp.86-92
    • /
    • 1998
  • The photosynthetic rate (LPS)in the field was higher in the non-shading condition than in the shading. The fertilizer application was somewhat higher than non-fertilizer application. After humus application at 50% sading condition the growth and LPS increased with Ligularia fischeri. The maximum LPS at 80% shading was 22.3${\mu}{\textrm}{m}$mol/m/s with N-fertilizer application . Except Aster tataricus and Solidago virge-aurea. var. asiatic where the maximum LPS at non-shading and N-fertilizer application were 38.68 and 35.28${\mu}{\textrm}{m}$mol/m2/s. While the maximum LPS of Aster scaber was 30.01${\mu}{\textrm}{m}$mol/$m^2$/s at non-shading and non-fertilizer application. the growth rate was higher shading and fertilized conditions than non-shading and non-fertilized . The most effective shading condition was 50% , but leaf ration was highest in the 80% . But a. tataricus was favorable at non-shading and N-feritlized conditions.

  • PDF

Influence of Nitrogen Application Rate on Growth and Dry Matter Yield of Achyranthes japonica Nakai (질소시비량이 쇠무릎의 생육 및 건물수량에 미치는 영향)

  • Kang, Young-Kil
    • Korean Journal of Medicinal Crop Science
    • /
    • v.11 no.2
    • /
    • pp.109-114
    • /
    • 2003
  • To determine the optimum N rate m Jeju island for utricle and root production of Achyranthes japonica Nakai, a medicinal plant, the plants were grown at two plant densities $(50\;and\;100\;hills/m^2$, two plants per hill; mall plots) at six N application rates (0, 6, 12, 18, 24, and 30 kg/10a; split plots) in 2001. There was no significant interaction between plant density and N application rate for all measured agronomic characters. Main root length and roots per hill were 5 and 52% greater, respectively, but N content of stover was lower under lower plant density compared to higher plant density. The other characters were not affected by plant density. N application rate did not significantly affect mall stem diameter, spikes per hill, spike length, utricles per spike, mall root length and diameter, and utricle N content. As N rate increased from 0 to 30 kg/10a, SPAD values and stover N content increased linearly from 35.0 to 40.5 and 1.09 to 1.38%, respectively, and plant height, branches per hill, stover, utricle and root dry matter yields, roots per hill, and top N yield increased quadratically. Spikes per hill were increased in a cubic manner with increased N application rates. N application rate for the maximum dry matter yield of utricle and root in A. japonica was estimated to be 21 kg N/10a.

Effect of Nitrogen Application Rate on Growth of Rumohra aristata and Cyclosorus dentatus of Korea Native Fern (질소시비량이 자생 가는쇠고사리와 탐라별고사리의 생육에 미치는 효과)

  • Hwang, Byoung-Tae;Ju, Jin-Hee;Bang, Kwang-Ja
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.8 no.3
    • /
    • pp.67-72
    • /
    • 2005
  • For the two species of native fern that have high development potential for interior landscape, Rumohra aristata and Cyclosorus dentatus, the physiological and growth characteries as nitrogen application rate such as $NaNO_3$ 0.0mg/L, $NaNO_3$ 0.5mg/L, $NaNO_3$5.0mg/L, $NaNO_3$ 50mg/L and $NaNO_3$ 500mg/L were surveyed. 1. A significant changes of Rumohra aristata, in top growth was not distinctive. However, as nitrogen application rate increased, the numbers of leaves declined and the content of chlorophyll and the number of wilted leaves increased. 2. As nitrogen application rate increased, the top growth of Cyclosorus dentatus and the content of chlorophyll was increased. However, its overall, ornamental value was reduced due to the rising number of wilted leaves and the declining number of new leaves.

Ultrasonic Sensor Controlled Sprayer for Variable Rate Liner Applications (초음파센서를 이용한 변량제어 스프레이어)

  • Jeon, Hong-Young;Zhu, Heping
    • Journal of Biosystems Engineering
    • /
    • v.36 no.1
    • /
    • pp.15-22
    • /
    • 2011
  • An experimental variable rate nursery sprayer was developed to adjust application rates for canopy volume in real time. The sprayer consisted of two vertical booms integrated with ultrasonic sensors, and variable rate nozzles coupled with pulse width modulation (PMW) based solenoid valves. A custom-designed microcontroller instructed the sensors to detect canopy size and occurrence and then controlled nozzles to achieve variable application rates. A spray delivery system, which consisted of diaphragm pump, pressure regulator and 4-cycle gasoline engine, offered the spray discharge function. Spray delay time, time adjustment in spray trigger for the leading distance of the sensor, was measured with a high-speed camera, and it was from 50 to 140 ms earlier than the desired time (398 ms) at 3.2 km/h under indoor conditions. Consequently, the sprayer triggered 4.5 to 12.5 cm prior to detected targets. Duty cycles of the sprayer were from 20 to 34 ms for senor-to-canopy (STC) distance from 0.30 to 0.76 m. Outdoor test confirmed that the nozzles were triggered from 290 to 380 ms after detecting tree canopy at 3.2 km/h. The spray rate of the new sprayer was 58.4 to 85.2% of the constant application rate (935 L/ha). Spray coverage was collected at four areas of evergreen canopy by water sensitive papers (WSP), and ranged from 1.9 to 41.1% and 1.8 to 34.7% for variable and constant rate applications, respectively. One WSP area had significant (P < 0.05) difference in mean spray coverage between two application conditions.