• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.205-208
• /
• 2005

Fabrication of large scaled mirror for the telescope application is the most challenging technology in recent year. Sophisticate technologies and know-how in fabrication and measurement are required to overcome the technological obstacles. KRISS(Korea Research Institute for Standards and Science) is now developing a large scaled mirror fabrication facility and KARI(Korea Aerospace Research Institute) is supporting the development. High precision interferometric test is required during the grinding and polishing of mirror to identify the surface profile precisely. The required fabrication accuracy of the mirror surface profile is $\lambda$/50 ms($\sim$10 nm for visible wave length). Thus the measurement accuracy should be far less than 10 m. To get this requirement, it is necessary to provide vibration free environment for the interferometer system and mirror under test. Thus the vibration responses on the mirror supporting table due to external vibration should be minimized by using a special isolation system. And the responses on the top of the tower, which hold the interferometer during test, should be minimized simultaneously. In this paper, we propose the concept design of vibration suppression system for the KRISS mirror fabrication facility.

• Structural Engineering and Mechanics
• /
• 제59권5호
• /
• pp.933-950
• /
• 2016

Decks, interior beams, edge beams and girders are the parts of a steel floor system. If the deck is optimized without considering beam optimization, finding best result is simple. However, a deck with higher cost may increase the composite action of the beams and decrease the beam cost reducing the total cost. Also different number of floor divisions can improve the total floor cost. Increasing beam capacity by using castellated beams is other efficient method to save the costs. In this study, floor optimization is performed and these three issues are discussed. Floor division number and deck sections are some of the variables. Also for each beam, profile section of the beam, beam cutting depth, cutting angle, spacing between holes and number of filled holes at the ends of castellated beams are other variables. Constraints include the application of stress, stability, deflection and vibration limitations according to the load and resistance factor (LRFD) design. Objective function is the total cost of the floor consisting of the steel profile cost, cutting and welding cost, concrete cost, steel deck cost, shear stud cost and construction costs. Optimization is performed by enhanced colliding body optimization (ECBO), Results show that using castellated beams, selecting a deck with higher price and considering different number of floor divisions can decrease the total cost of the floor.

• 정보보호학회논문지
• /
• 제11권5호
• /
• pp.75-84
• /
• 2001

속성인증서는 사용자의 속성정보를 저장 관리하는 인증서로서 기존 공개키인증서가 사용자의 공개키 정보를 통해 인증 정보를 제공한 것과는 달리 사용자의 지위, 권한, 임무 등과 같은 다양한 권한정보를 제공한다. 최근 국제적인 표준 단체에서 속성인증서에 대한 표준이 제정되고 있으며 국내외적으로 속성인증서에 대한 연구 및 개발이 시작되고 있으며 인증뿐만 아니라 인가정보가 필요한 많은 실응용 분야에서 활용될 수 있을 것으로 예상된다. 따라서 본 고에서는 이와 같은 속성인증서의 출현배경, 표준화 동향에 대하여 고찰하며 현재 IETF에서 제정중인 속성인증서의 프로화일과 관련 기술에 대하여 설명한다. 또한 속성인증서를 이용한 접근통제 시스템을 소개하여 속성 인증성의 활용에 대하여 기술한다.

• International journal of advanced smart convergence
• /
• 제11권3호
• /
• pp.170-178
• /
• 2022

Purpose: Gardening has been reported to have positive emotional and physical effects in older adults. However, limited studies have assessed this relationship in Korea. Therefore, in this pilot study of densely populated urban dwellers, we aimed to investigate whether temporary but repeated experiences of the natural environment could positively change metabolism-related blood indicators. Methods: This study used pre- and post-interventional designs to investigate the effects of 16 weeks of gardening on lipid profiles in an urban adult population and investigate their relationships. This study was conducted 30 times at the H Botanical Garden in Yongin City from August 16, 2021 to November 30, 2021 (16 weeks, twice a week, 3 hours each time). Before and after the gardening program, a clinical pathologist collected blood samples from the participants. Results: High-density lipoprotein levels increased, low-density lipoprotein levels decreased, and total cholesterol levels decreased after the gardening activity. Conclusions: Our findings suggest that gardening has potential for clinical application as it has good control over the lipid profile through physical activity. These findings can be used as basic data for studying the relationship between urban populations and their living environment and for various studies in the future as experiencing the natural environment provides many health benefits.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제67차 동계학술대회논문집 31권1호
• /
• pp.177-179
• /
• 2023

본 연구에서는 사회복지시설 종사사의 직무만족도 유형을 살펴보고 유형별 예측변인과의 영향관계를 검증하였다. 이러한 연구목적을 검증하기 위해 보건복지부의 '사회복지시설 실태조사'(2014년) 데이터에서 직무만족도 변인에 모두 응답한 11,660명을 최종 분석하였다. 잠재프로파일 분석결과, 사회복지사의 직무만족도 유형은 4집단으로 나타나 '최상 직무만족도집단', '중상 직무만족도집단', '중간 직무만족도집단', '최하 직무만족도집단'으로 명명하였다. 다항로지스틱 분석결과, CLASS4(최상 직무만족도집단)를 준거집단으로 하여 CLASS1(최하 직무만족도집단)과 비교해 노동강도대비 보수수준 평가, 타직종대비 보수수준 평가, 시설안전도, 인권보장도를 높게 인식할수록 CLASS4(최상 직무만족도집단)에 속할 확률이 높아지는 것으로 나타났다. 다만, 이직의사는 낮을수록 CLASS4(최상 직무만족도집단)에 속할 확률이 높아지는 것으로 나타났다. CLASS4를 준거집단으로 하여 CLASS2집단, CLASS3집단도 비교분석 하였다.

• 대한치과기공학회지
• /
• 제45권3호
• /
• pp.81-86
• /
• 2023

Purpose: This study aimed to observe the effect of laminate veneer on patient's teeth based on the manufacturing of laminate veneer restorations, which are produced by fabricating a ceramic cast body using IPS Empress, a pressure casting method and then forming the veneer by layering. Subsequently, we assessed the potential of its clinical application. Methods: This study discusses and preserves various treatment plans, such as diagnostic wax-up and treatment room diagnosis, for patients who visit the hospital to improve the appearance of teeth due to diastema of maxillary teeth, inexperienced resin filling, lack of esthetics, and external teeth. A ceramic cast body is constructed using IPS Empress, which is an effective and aesthetic restoration pressure casting method to restore the veneer with a laminate made by layering. Results: Compared with the preoperative state, the frontal view of the patient after the final restoration showed the formation of a natural smile line; the space between the central and lateral incisors was filled in synchronously with the adjacent teeth. In addition, the emergence profile is maintained by reducing the over-contour as much as possible. Conclusion: The patient's quality of life is improved by providing them with a satisfactory natural smile.

• 한국정밀공학회지
• /
• 제31권8호
• /
• pp.721-728
• /
• 2014

In this paper, it is proposed a method of optimizing path parameters for large-area laser processing. On-the-fly system is necessary for large-area laser processing of uniform quality. It is developed a MOTF(Marking On-The-Fly) board for synchronizing the stage and scanner. And it is introduced the change of the error due to the change of parameters and algorithm for large-area laser processing. This algorithm automatically generates stage path and a velocity profile using acceleration and deceleration parameters. Since this method doesn't use a G-code, even if without expert knowledge, it has an advantage that can be accessed easily. Angle of one of the square of $350{\times}350mm$ was changed from $50^{\circ}$ to $80^{\circ}$ and analyzed the error corresponding to the value of Ta. It is calculated the value of Ta of the best with a precision of 20um through measurement of accuracy according to the Ta of each angle near the edge.

• 대한안전경영과학회지
• /
• 제10권4호
• /
• pp.189-198
• /
• 2008

At present, companies write daily work record or use bar-code in order to collect distribution flow data in real time. However, it needs additional works to check the record or read the bar-code with a scanner. In this case, human error could decrease accuracy of data and it would cause problems in reliability. To solve this problem, RFID (Radio Frequency Identification) is introduced in many automatic recognition sector recently. RFID is a technology that identification data is inserted into micro-mini IC chip and recognize, trace, and manage object, animal, or person using wireless frequency. This is being emerged as the core technology in future ubiquitous environment. This study is intended to suggest RFID application method in franchise business. Traceability and visibility of individual product are supplied based on EPCglobal network. It includes DW system which supplies various assessment data about product in supply chain, financial transaction system which is based on product transaction and position information, and RFID middleware which refines and divides product data from RFID tag. With the suggested application methods, individual product's profile data are supplied in real time and it would boost reliability to customer and make effective cooperation with existing operation systems (SCM, CRM, and e-Business) possible.

• Wind and Structures
• /
• 제22권6호
• /
• pp.617-633
• /
• 2016

In this paper, the analysis of hyperbolic cooling tower on elastic subsoil exposed to unsymmetrical wind loading is presented. Modified Vlasov foundation model is used to determine the soil parameters as a function of vertical deformation profile within subsoil. The iterative parameter updating procedure involves the use of Open Application Programming Interface (OAPI) feature of SAP2000 to provide two way data flow during execution. A computing tool coded in MATLAB employing OAPI is used to perform the analysis of hyperbolic cooling tower with supporting columns over a hollow annular raft founded on elastic subsoil. The analysis of such complex soil-structure system is investigated under self-weight and unsymmetrical wind load. The response of the cooling tower on elastic subsoil is compared with that of a tower that its supporting raft foundation is treated as fixed at the base. The results show that the effect of subsoil on the behavior of cooling tower is considerable at the top and bottom of the wall as well as supporting columns and raft foundation. The application of a full-size cooling tower has demonstrated that the procedure is simple, fast and can easily be implemented in practice.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.27-34
• /
• 2018

Concrete placed under hot weather condition suffers from larger slump loss, rapid moisture evaporation due to high air temperature. Proper measures for material, transportation and curing should be taken to prevent the quality deterioration of the concrete under hot weather condition. In Korea, Although the period of hot weather concrete in Korea occupies only 2 months, there are a lot of quality problems including plastic, drying shrinkage and cold joint. Therefore, the objective of this paper is to investigate and compare the temperature history and crack occurrence of the concrete, which was placed in the actual apartment house construction field under hot weather condition, in response to the application of surface covered curing blankets including PE film, single layer clear bubble sheet, white colored bubble sheet and aluminum metalized bubble sheet. Test results indicated that the application of white colored bubble sheet and aluminum metalized bubble sheet showed most favorable results in terms of reduction in temperature rise and crack occurrence as well as easiness in handling. But, due to light reflection by aluminum metalized bubble sheet, it is believed that white colored bubble sheet is preferable.