• Advances in aircraft and spacecraft science
• /
• 제7권5호
• /
• pp.405-423
• /
• 2020

Non-linear energy sink (NES) is an emerging passive absorber able to mitigate the dynamic response of structures without any external energy supply, resonating with all the modes of the primary structure to control. However, its inherent non-linearities hinder its large-scale use and leads to complicated design procedures. For this purpose, an approximate design approach is herein proposed in a stochastic framework. Since loads are random in nature, the stochastic analysis of non-linear systems may be performed by means of computational intensive techniques such as Monte Carlo simulations (MCS). Alternatively, the Stochastic Linearisation (SL) technique has proven to be an effective tool to investigate the performance of different passive control systems under random loads. Since controlled systems are generally non-classically damped and most of SL algorithms operate recursively, the computational burden required is still large for those problems that make intensive use of SL technique, as optimal design procedures. Herein, a procedure to speed up the Stochastic Linearisation technique is proposed by avoiding or strongly reducing numerical evaluations of response statistics. The ability of the proposed procedure to effectively reduce the computational effort and to reliably design the NES is showed through an application on a well-known case study related to the vibrations mitigation of an aircraft wing.

• 소음진동
• /
• 제4권1호
• /
• pp.33-42
• /
• 1994

When a vibration is generated due to the misalignment, the reduction of the vibration level is not attainable unless a correct shaft alignment is conducted. In a turbine system, an alignment procedure requires quite a lot amount of expense and time. To reduce this effort, an algorithm of the turbine alignment is developed to be used in the computer program. The program consists of five parts : input, calculation, display of the results, file management, and printer output. In the input part, users must provide the data on the turbine number, the reference value of the alignment, and the number of the feet of the generator. In calculation, the moving distance of the bearing and the necessary amount of the shims are calculated. In the display and the output parts, the calculated results are displayed and calculated. In the display and the output parts, the calculated results are displayed and printed. Then, by using the file management, results and procedures conducted are saved in the floppy diskette or in the hard disk. The developed program can be run in IBM PC compatible with more than 640 KB of main memory with the operating system of MS-DOS v 3.3 or higher. It is developed for novice users with no experience or specialty in this field. The program is not only useful in the power plant application, but also helpful for recording of the alignment procedures.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.822-828
• /
• 2005

Customer satisfaction becomes one of the important managerial concerns associated with corporate competency in current competitive environment for Internet communication service companies. Hence, it is demanding to improve a company's customer satisfaction through the total quality management perspective. In practice, engineers as well as the management hope to find major quality characteristics with Internet communication network that is closely related to customer satisfaction, consequently aiming to the raise of their company's customer satisfaction. This paper presents an empirical relationship analysis between network quality characteristics and customer satisfaction on Internet communication. Methodologically, the relationship analysis framework is based on the regression variable selection procedures. In this framework, it is implemented that; 1) iterative model building; and 2) consistent criteria application to statistical tests for selecting significant variables. A case study shows that; 1) the customer satisfaction on the network connection seems to be more closely related to the network quality characteristics compared with the customer satisfaction on the network speed; and 2) the download disconnection rate has relatively evident relationship with the customer satisfaction on the network connection.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권2호
• /
• pp.174-181
• /
• 2007

Today, endoscopic procedures are common in diagnostic and other surgical procedures, with endoscopically enhanced and magnified images permitting surgical access through minimal incisions. This has expanded the treatment options for many difficult anatomic sites, and the endoscope facilitated safe anatomic reduction and fixation. The use of the endoscope may reduce the disadvantages of open fracture repair and should be considered for broad application in the treatment of displaced facial bone fractures. Optical endoscopic magnification minimizes the disadvantages associated with open surgical repair, including the risk of facial nerve injury and external facial scarring, and no postoperative complications have been attributable to the endoscopic approach. This technique was used in 14 patients treated at Ulsan University Hospital, Korea, from September 2004 to August 2006, including six mandibular subcondyle fractures, five blowout fractures and three zygomaticomaxillary complex (ZMC) fractures. Careful preoperative evaluation and proper surgical technique were essential to achieve optimal results in the selected patients.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.286-289
• /
• 2001

This paper deals with the procedures of effective mid-term Operation Planning establishment for painting shop in shipbuilding. and develop prototype system. In general, the block painting process consists of two stages such as blasting operation for surface preparation and painting operation for paint application for blocks. Weather condition is a potent Influence on those operations. The procedures consists of four steps, Load analysis, Generate alternative simulation plan. Implementation of Allocation automation module and Compare result of each simulation plan. Explain of each step. as follows, 1.step, Load analysis measure amount of assigned workload and manhour. 2.step, simulation scheme include alterable control variable such as overtime, weather. Auto allocating module carry out feasibility of simulation plan. 3.step, Allocation automation module are composed of three algorithms, as followings: - the block allocation algorithm that determines the number of blocks to be processed each day, - the team allocation algorithm that allocates blocks to worker groups. - the block arrangement algorithm that arrange blocks in blasting and painting cells. Since the block arrangement algorithm is conducted simultaneously with the team allocation algorithm, the total structure of the operating algorithms is considered to have two phases: first, daily load balancing with capacity limit and second, team allocation considering arrangement each day 4 step, Comparing result of each simulation plan. and select best simulation plan.

• Industrial Engineering and Management Systems
• /
• 제10권1호
• /
• pp.34-42
• /
• 2011

Many companies open multiple projects simultaneously due to market trends, which results in a crowding out effect because of limited resources. R&D engineers become overloaded and scheduling of product development is delayed resulting in timing misses and lost sales leads. The company in this case study (Company A), often opens up many projects simultaneously in order to respond to market needs quickly. The engineers are overloaded and, of course, the schedule is delayed. In order to identify problems, Company A began using Dr. Goldratt's Thinking Processes (TP) during new product development (NPD). When the analysis phase of TP was completed, Company A's core problem was identified as "the quantity of kick-off projects." Consequently, new rules and conditions and procedures were proposed for the opening, suspending, stopping, and closing of projects. Finally, the "Future Reality Tree" ensured that the proposed rules, conditions and procedures were set up as an available solution approved for practical application by executives. After a one-year trial run, the results showed that the Project Duration Rate was reduced by 53%, the Project Closed Rate was increased by 140% and the Project on Time Rate was increased from 10% to 68%. The above results give significant evidence of the benefits of the proposed methodology.

• Ocean and Polar Research
• /
• 제25권2호
• /
• pp.227-235
• /
• 2003

In August 1998, during the resumed fourth session of the Authority, the delegation of the Russian Federation reminded the Assembly that, in addition to polymetallic nodules, other mineral resources existed in the Area, including polymetallic sulphides and cobalt crusts, and requested the Authority to adopt rules, regulations and procedures for exploration for such resources. Pursuant to article 162, para. 2(o)(ii), of the 1982 UNCLOS, such rules, regulations and procedures are to be adopted within three years of the date of such a request. This article reviewed the 'Draft Rules and Regulations for the Exploration and Exploitation of Sea-Floor Massive Sulphides and Cobat-rich Ferromanganese Crusts in the Area' by ISA in 2001, and the 'Madang Guideline for Offshore Mineral Policy' written in 1999 in respect of the international trends of polymetallic sulphides and cobalt crusts. Issues for size of mining area and relinquishment, application of the site-banking system, procedure for dealing with overlapping claims and precautionary approach etc. for the establishment of the norm of polymetallic sulphides and cobalt crusts are reviewed as consideration factors.

• Journal of Pharmaceutical Investigation
• /
• 제36권6호
• /
• pp.421-435
• /
• 2006

The objective of this report is to introduce the European Union's variation rules governing medicinal products that are subject to post-approval changes. The EMEA outlines a variety of changes occurring to approved medicinal products. It also recommends a marketing authorisation holder to follow specific post-approval applications in various situations. For instance, the Commission Regulation(EC) No. 1085/2003 explains variation types and suggests post-authorisation procedures with which an applicant should comply. In all cases of minor and major variations the applicant has to investigate and validate whether or not the intended changes would have impact on the safety, efficacy and quality of a drug product. The applicant should then submit to the EMEA a variation application with adequate documentation in support of the notified changes. This procedure is implemented to ensure that changes to the approved medicinal product do not cause my public health concerns. In fact, the post-authorisation guidance categorizes post-approval changes into type IA/IB variations, type II variations, and extension applications. Such classifications determine administrative procedures to be followed in an efficient manner. Based on the type of a variation, the regulatory agency opts to reduce or extend the evaluation time-frame. The thrust of the EU's post-authorisation guidance is introduced in text with appropriate explanation. All these information will be likely to be helpful in updating a Korean regulatory guidance that could better deal with post-approval changes to generic drugs available in the market.

• Journal of Yeungnam Medical Science
• /
• 제3권1호
• /
• pp.53-62
• /
• 1986

In the past 10 years, modern technology has made deep seated obscure lesions visible. With development of computer technology and various stereotaxic techniques, many new procedures. refinement of old procedures, and development of new applications are possible. The authors are intended to provide a detailed description of our experience with the Brown-Roberts-Wells(BRW) stereotactic system in the evaluation and management of 90 patients with intracranial lesions, and to provide cases presentation of various inaccessible intracranial lesions.

• 대한치과기공학회지
• /
• 제26권1호
• /
• pp.209-216
• /
• 2004

The purpose of this study is to introduce how to make implant supported over denture with Oring. Many kinds of attachments have used to dental restorations. The application of attachment has widely increased implant fixed prosthesis and implant supported over denture. In order that implant supported over denture have properly retention, generally used O-ring, magnetic, bar attachment. O-ring give us an advantage that is required more minimum vertical dimension than bar-type and easily replace with new part. When we make these prosthesis using O-ring, Bar, Ball attachment, we should following procedures. Strong occlusion force leads to fracture of over denture because part of functional mechanism as implant abutment or attachment is spaced. Clips are regularly activated. O-ring and springs are changed every year. The pattern of resorption should be carefully monitored and compensated for by relining procedures. If the over denture appears to rest on the bar or the ball attachments, relining should be performed and clips/caps should be changed.