• Journal of the Korean Solar Energy Society
• /
• v.33 no.3
• /
• pp.107-113
• /
• 2013

In this study, three different types of experimental models of BIPV curtain wall units with GIGS modules were built, and their thermal and electrical performances were analyzed. The experimental results showed that the temperature of the rear side of the GIGS module with the application of an insulation in the curtain wall spandrels was higher than a GIGS module standalone by $22^{\circ}C$, which results in a reduction in the power generation of the former by 8 %. On the other hand, when ventilation was applied to the model to improve the power generation performance, the module temperature was observed to be $142^{\circ}C$ lower compared to the enclosed type, and the power generation performance improved by 5 %. It confirmed that the temperature increase in the rear side of the GIGS module with insulation layer reduced the electrical performance of the module. Based on this, it is claimed that providing sufficient ventilation at the GIGS applied spandrels contribute to improve the power generation of the GIGS module.

• Journal of the Korean housing association
• /
• v.16 no.4
• /
• pp.121-129
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• Journal of Power Electronics
• /
• v.9 no.3
• /
• pp.464-471
• /
• 2009

This paper introduces a new Motion-$SPM^{TM}$ (Smart Power Modules) module in Single In-line Package (SIP), which is a fully optimized intelligent integrated IGBT inverter module for up to 1kW low power motor drive applications. This module offers a sophisticated, integrated solution and tremendous design flexibility. It also takes advantage of pliability for the arrangement of heat-sink due to two types of lead forms. It comes to be realized by employing non-punch-through (NPT) IGBT with a fast recovery diode and highly integrated building block, which features built-in HVICs and a gate driver that offers more simplicity and compactness leading to reduced costs and high reliability of the entire system. This module also provides technical advantages such as the optimized cost effective thermal performances through IMS (Insulated Metal Substrate), the high latch immunity. This paper provides an overall description of the Motion-$SPM^{TM}$ in SIP as well as actual application issues such as electrical characteristics, thermal performance, circuit configurations and power ratings.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.67 no.2
• /
• pp.75-81
• /
• 2018

In this paper for developing and implementing the car driver's front lane attention enhancement developed system using the car camera. The developed system automatically alarm the car driver when front cars make the dangerous situation. We use Raspberry Pi camera module V2 as car camera module, Raspberry Pi 3 board as hardware main board of implementing embedded system and develop the application library module which can be operated on the Raspberry situation. The application library module widely consist of two part, front car recognition part and dangerous situation distinguish part. Our developed system satisfy the performance test of the target system at the software test certification laboratory of TTA(Telecommunication Technology Association). We test four items as attentive car recognition ability at day and night, system performance, response time. We get the performance of developed system based on the four goal. The car driver's front lane attention enhancement system in this paper will be widely used at the ADAS(Advanced Driving Assistance System) because of the better performance and function.

• Journal of Korean Physical Therapy Science
• /
• v.13 no.2
• /
• pp.57-65
• /
• 2006

This study was conducted to develop the PBL module using simulation(S-PBL), to apply it to the physical therapy curricula, and its effect on students; learning contents, learning process, and its overall impacts. The S-PBL module was apply on 47 students of first year physical therapy in Jeju Halla College for 8 weeks from 2005 Feb to April. The data was analyzed via SPSS 10.0; the evaluation of learning contents and process was divided into 5 areas; the learning impacts in 4 areas. The research sought average and standard deviations. The students; satisfaction regarding S-PBL learning contents and process averaged >3.5 (on the Likert Scale of 1 thru 5) which indicated high learning achievement. For the learning impact, using an S-PBL module, it averaged >2.8 (on the Likert Scale of 1 thru 4) which indicated high learning impact. Significantly, the students showed high satisfaction in the areas of clinical practicum, the learning process, the opportunity to participate in clinical affiliation, and motivation for acquiring professional knowledge. This study proved that the application of S-PBL is effective for the physical therapy students; ability to carry out physical therapy, and it is also worth to apply in the physical therapy curricula to improve the students; participation in clinical skills.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.2
• /
• pp.97-107
• /
• 2018

PURPOSE: This study investigated the job-centered curriculum in the Department of Physiotherapy at the University of Brighton, England, to examine NCS (national competency standards) curriculum in physiotherapy. METHODS: The researcher visited the University of Brighton from September 2015 to May 2016 and conducted interviews with faculty members. Data were collected through the university's website and the Chartered Society of Physiotherapy. RESULTS: The undergraduate program is a three-year program and with a module system. There is a course leader for each module. Each grade requires 120 credits (10 hours per credit) and credit hours can be earned through lectures, tutorials, practical sessions, self-directed e-learning, group work, inter-professional classes, and seminars. Clinical placement is carried out six times during 3 years, for a total of 32 weeks, 35 hours per week, 1120 hours in total. Students are enrolled as a student members of the Chartered Society of Physiotherapy and are covered by professional liability insurance during clinical placement. The Center for Teaching and Learning holds regular workshops to discuss curriculum and module design, conduct course reviews, and review student assessment and feedback. All courses at the university must be approved, monitored annually, and re-approved every 5 years. CONCLUSION: This study can contribute to the development and operation of the NCS physiotherapy curriculum, as well as to the development of modules and assessment tools related to the application of this curriculum.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3064-3066
• /
• 1999

The existing equipment with wire communication can expect the stability of data transmission. However, according to increasing a number of DTE (Data Terminal Equipment), wiring work becomes a heavy burden. Restriction to application about portable DTE and the lack of flexibility are another drawback of wire communication. This paper presents the design and implementation of a RF (Radio Frequency) based wireless communication system. The RF based module is designed to the multi communication between DTEs. The RF based module consists of RF circuit and microprocessor. The main properties of RF circuit are maximum 5Kbps transmission rate, maximum 90m transmission distance and 433MHz frequency band. The microprocessor rearrange the data into AHDLC(Advanced High level Data Link Control) format and then instructs RF circuits to transmit/receive the data. The RF module have a wide application field such as fire/security alarm, remote control/measurement etc..

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1255-1266
• /
• 2014

This thesis presents MPU module, Base board and sensor module which are efficient industrial control through design and manufacture as developing S5PV210 CPU of SAMSUNG used by ARM Cortex-A8 based on Android which is Open mobile platform is installed to embedded system. Data for temperature and humidity which are received by sensor module proved the suitability and validity for the real time framework design as implementing application program employed the smart phone App with hybrid application based on DB of web server.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.6
• /
• pp.121-127
• /
• 2004

The controller area network(CAN) was originally developed to support cheap and rather simple automative applications, However, because of the its performance and low cost, it is also being considered in automated manufacturing and process control environments to interconnect intelligent devices, such as modem sensors and actuators. This paper presents a new application technology of the developed CAN control modules for the automated doors in building automation system Key pad and RF methods are used to open and close the automated door by the slave CAN module with CAN Protocol. BAS application technology of CAN field bus modules is also presented firstly in our nation.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2006.10a
• /
• pp.37-45
• /
• 2006

The mobile-phone which Camera was put on was released at the end of 2000 and dramatically puts up the deployment ratio because not only simple Camera but also a function that the photograph which I took is dispatched was added. It is the force that demand in this year presses 600,000,000 sale of a mobile-phone is estimated to be 960,000,000 of them in 2006, and to be able to include two errands with a support model after 3G. A person of entry to a camera-module appear much. In addition, the various kinds of products open markedly which a product comes to be known widely in the world, and the application range has opened widely, and considered QCDT come to be key issues for answer to market demand. By manufacturing industry, there is peculiar culture to each industry, camera-module is the composition the various industries. The construction of true Supply-chain becomes unavoidable to make a good product. I describe the point that the situation of each supply-chain and the direction for the future by the view point of module assembly maker.