• Journal of Aerospace System Engineering
• /
• v.18 no.2
• /
• pp.12-20
• /
• 2024

The application of reinforcement design to ensure the structural safety of electronics in small satellites is limited by the spatial constraints of the satellite structure during launch vibrations. Additionally, a reliable evaluation approach is needed for mounting highly integrated devices that are susceptible to fatigue failure. Although the Steinberg fatigue failure theory has been used to assess the structural integrity of electronic devices, recent studies have highlighted its theoretical limitations. In this paper, we propose a structural methodology based on the critical strain theory to design the digital control unit (DCU) of the X-band SAR payload component for the small SAR technology experimental project (S-STEP), a small satellite constellation. To validate the design, we conducted modal and random analyses using simplified modeling techniques. Based on our methodology, we ultimately demonstrated the structural safety of the electronics through analysis results, safety margin derivation, and functional tests conducted both before and after the launch test.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.121-130
• /
• 2024

In this paper, we propose an installation approach for Naval Combat Management System(CMS) software that identifies potential data anomalies during installation. With the popularization of wireless communication methods, such as Low Earth Orbit(LEO) satellite communications, various utilization methods using wireless networks are being discussed in CMS. One of these methods includes the use of wireless network communications for installation, which is expected to enhance the real-time performance of the CMS. However, wireless networks are relatively more vulnerable to security threats compared to wired networks, necessitating additional security measures. This paper presents a method where files are transmitted to multiple nodes using encryption, and after the installation of the files, a validity check is performed to determine if there has been any tampering or alteration during transmission, ensuring proper installation. The feasibility of applying the proposed method to Naval Combat Systems is demonstrated by evaluating transmission performance, security, and stability, and based on these evaluations, results sufficient for application to CMS have been derived.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.299-313
• /
• 2024

Electrochemical machining (ECM) is an effective manufacturing method for difficult-to-machine materials and is widely used in the precision manufacturing of aerospace components. In recent years, the requirements for the machining accuracy and surface integrity of ECM have become increasingly stringent. To further improve the machining quality, this work investigated the intricate laws between electrolyte filtration accuracy and machining quality. Electrolytes with different filtration accuracies were compared, and a numerical simulation was used to evaluate the change in temperature and bubble rate of the flow field in the machining area. Experiments were conducted on ECM of Ti-6Al-4V (TC4) alloy workpieces using electrolytes with different filtration accuracy. The workpiece machining accuracy and surface quality were analyzed, and the repetition accuracy of the workpiece was evaluated. The intricate laws between electrolyte filtration accuracy and machining quality were explored. It was found that when the electrolyte filtration accuracy is improved, so too is the machining quality of the ECM. However, once the filtration accuracy has reached a certain value, the machining quality has extremely limited improvement. By evaluating the repetition accuracy of processed workpieces in electrolytes with different filtration accuracies, it was found that when the filtration accuracy reaches a certain value, there is no positive correlation between the repetition accuracy and filtration accuracy. The result shows that, for the workpiece material and conditions considered in this paper, an electrolyte with 0.5㎛ filtration accuracy is suitable for the wide application of precision ECM.

• Convergence Security Journal
• /
• v.23 no.4
• /
• pp.93-100
• /
• 2023

This paper presents a novel approach for assigning group keys within a dynamic swarm unmanned system environment. In this environment, multiple groups of unmanned systems have the flexibility to merge into a single group or a single unmanned system group can be subdivided into multiple groups. The proposed protocol encompasses two key steps: group key generation and sharing. The responsibility of generating the group key rests solely with the leader node of the group. The group's leader node employs a secret sharing scheme to fragment the group key into multiple fragments, which are subsequently transmitted. Nodes that receive these fragments reconstruct a fresh group key by combining their self-generated secret fragment with the fragment obtained from the leader node. Subsequently, they validate the integrity of the derived group key by employing the hash function. The efficacy of the proposed technique is ascertained through an exhaustive assessment of its security and communication efficiency. This analysis affirms its potential for robust application in forthcoming swarm unmanned system operations scenarios characterized by frequent network group modifications.

• Geophysics and Geophysical Exploration
• /
• v.27 no.2
• /
• pp.144-153
• /
• 2024

Recent research is increasingly focused on utilizing seismic waves for structure health monitoring (SHM). Specifically, seismic interferometry, a technique applied in geophysical surveys using ambient noise, is widely applied in SHM. This method involves analyzing the response of buildings to propagating seismic waves. This enables the estimation of changes in structural stiffness and the evaluation of the location and presence of damage. Analysis of seismic interferometry applied to SHM, along with case studies, indicates its highly effective application for assessing structural stability and monitoring building conditions. Seismic interferometry is thus recognized as an efficient approach for evaluating building integrity and damage detection in SHM and monitoring applications.

• Journal of Radiation Protection and Research
• /
• v.40 no.4
• /
• pp.252-260
• /
• 2015

This paper describes the technical background for the Korean wildlife radiation dose assessment code, K-BIOTA, and the summary of its application. The K-BIOTA applies the graded approaches of 3 levels including the screening assessment (Level 1 & 2), and the detailed assessment based on the site specific data (Level 3). The screening level assessment is a preliminary step to determine whether the detailed assessment is needed, and calculates the dose rate for the grouped organisms, rather than an individual biota. In the Level 1 assessment, the risk quotient (RQ) is calculated by comparing the actual media concentration with the environmental media concentration limit (EMCL) derived from a bench-mark screening reference dose rate. If RQ for the Level 1 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 2 assessment, which calculates RQ using the average value of the concentration ratio (CR) and equilibrium distribution coefficient (Kd) for the grouped organisms, is carried out for the more realistic assessment. Thus, the Level 2 assessment is less conservative than the Level 1 assessment. If RQ for the Level 2 assessment is less than 1, it can be determined that the ecosystem would maintain its integrity, and the assessment is terminated. If the RQ is greater than 1, the Level 3 assessment is performed for the detailed assessment. In the Level 3 assessment, the radiation dose for the representative organism of a site is calculated by using the site specific data of occupancy factor, CR and Kd. In addition, the K-BIOTA allows the uncertainty analysis of the dose rate on CR, Kd and environmental medium concentration among input parameters optionally in the Level 3 assessment. The four probability density functions of normal, lognormal, uniform and exponential distribution can be applied.The applicability of the code was tested through the participation of IAEA EMRAS II (Environmental Modeling for Radiation Safety) for the comparison study of environmental models comparison, and as the result, it was proved that the K-BIOTA would be very useful to assess the radiation risk of the wildlife living in the various contaminated environment.

• Korean Journal of Ecology and Environment
• /
• v.40 no.1
• /
• pp.72-81
• /
• 2007

The purpose of this study was to develop a multi-metric Lentic Ecosystem Health Assessment (LEHA) model and apply model to dataset sampled from Daechung Reservoir in September 2005. The metrics were composed of 11 parameters such as physical, chemical and biological variables. The metric attributes of $M_1{\sim}M_8$ followed after the model of biological integrity using fish assemblages that previously adapted in lotic ecosystems, while the metrics of $M_9{\sim}M_{11}$ were added on the basis of literature. The metric of $M_9$ reflected habitat conditions in the littoral zone and the metric of $M_{10}$ reflected chemical conditions of the reservoir. For the application of regression analysis of long-transformed conductivity [$Log_{10}$(Cond)] against $COD_{Mn}$, based on 150 sampling sites at Korean reservoirs, showed that the variation of conductivity was explained 77.4% [$COD_{Mn}=4.42{\times}Log_{10}(Cond)-5.43;\;R^2=0.774$, p<0.01, n=150] by the variation of $COD_{Mn}$. The metric of $M_{11}$ was based on Tropic State Index (TSI), based on chlorophyll-${\alpha}$ concentrations (Chl-${\alpha}$). Analysis of TSI $(Chl-{\alpha})$ showed that above 50 was estimated "1", $40{\sim}50$ was estimated "3" and below 40% was estimated '5'. Overall, velues of LEHA in the reservoir averaged 30.5, indicating a "fair${\sim}$poor condition", which is judged by the criteria of U.S. EPA (1993). More studies such as metric numbers and attributes should be done for the application of the model.

• Journal of radiological science and technology
• /
• v.26 no.3
• /
• pp.51-57
• /
• 2003

Mitigation of fast neutron irradiation damage on reactor vessel and improvement of mechanical integrity are desired for the successful plant life-time extension. In this study, the performance of metallic hydride for this application is reviewed and compared. First, selected prospective metallic hydrides are evaluated by MCNP code and put into the attenuation test using Cf-252 neutron source. Since for the reactor application high moderation and reflection with no absorption are favored, Z factor is introduced for the evaluation. According to the Z value estimation $ZrD_2$ and $TiD_2$ are turned out to be the most favorable fast neutron shielding materials. More thorough evaluation by computer simulation and experimentally, will be followed.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.78
• /
• pp.1-29
• /
• 2018

This article demonstrates that both the Warsaw Convention Systemand the Montreal Convention are not designed for multimodal transport, let alone for "Door to Door" transport. The polemic directed against the "Door to Door" application of the Warsaw Convention systemand the Montreal Convention is predominantly driven by the text and the drafting philosophy of the said Contentions that since 1929 support unimodalism-with the rule that "the period of the carriage by air does not expend to any carriage by land, by sea or by inland waterway performed outside an airport" playing a profound role in restricting their multimodal aspirations. The drafters of the Montreal Convention were more adventurous than their predecessors with respect to the boundaries of the Montreal Convention. They amended Art. 18(3) by removing the phrase "whether in an aerodrome or on board an aircraft, or, in the case of landing outside an aerodrome, in any place whatsoever", however, they retained the first sentence of Art. 18(4). The deletion of the airport limitation fromArt. 18(3) creates its own paradox. The carrier can be held liable under the Montreal Convention for the loss or damage to cargo while it is in its charge in a warehouse outside an airport. Yet, damage or loss of the same cargo that occurs during its surface transportation to the aforementioned warehouse and vice versa is not covered by the Montreal Convention fromthe moment the cargo crosses the airport's perimeter. Surely, this result could not have been the intention of its drafters: it certainly does not make any commercial sense. I think that a better solution to the paradox is to apply the "functional interpretation" of the term"airport". This would retain the integrity of the text of the Montreal Convention, make sense of the change in the wording of Art. 18(3), and nevertheless retain the Convention's unimodal philosophy. English courts so far remain loyal to the judgment of the Court of Appeal in Quantum, which constitutes bad news for the supporters of the multimodal scope of the Montreal Convention. According the US cases, any losses occurring during Door to Door transportation under an air waybill which involves a dominant air segment are subject to the international air law conventions. Any domestic rules that might be applicable to the road segment are blatantly overlooked. Undoubtedly, the approach of the US makes commercial. But this policy decision by arguing that the intention of the drafters of the Warsaw Convention was to cover Door to Door transportation is mistaken. Any expansion to multimodal transport would require an amendment to the Montreal Convention, Arts 18 and 38, one that is not in the plans for the foreseeable future. Yet there is no doubt that air carriers and freight forwarders will continue to push hard for such expansion, especially in the USA, where courts are more accommodating.

• Korean Journal of Environmental Biology
• /
• v.17 no.2
• /
• pp.191-198
• /
• 1999

Enzyme-aided bleaching of softwood and hardwood kraft pulps by a xylanase preparation from an alkalophilic fungus Cephalospotium sp. RYM-202 was studied. Maximal solubilization of Pulp xylan was obtained at 5$0^{\circ}C$ in both kraft pulps. The optimum pH of the enzyme for the hydrolysis of pulp xylan was 8.0 and more than 90% of the maximal activity was detected at 9.0. The positive effects of xylanase pretreatment on bleachability of softwood and hardwood kraft pulps were observed. The kappa number of softwood and hardwood kraft pulps was decreased by 3.7 and 2.0 units, respectively. The pulp fibre integrity was not significantly affected by xylanase pretreatment when the physical properties of handsheets made from xylanase-treated pulps were compared with those of handsheets from untreated pulps. These results indicate that the alkaline xylanase of Cephalospotium sp. RYM-202 is well suitable for application in enzymatic prebleaching of softwood and hardwood kraft pulps under the alkaline conditions.