• 펄프종이기술
• /
• 제37권3호
• /
• pp.33-40
• /
• 2005

In this study, a nano-colloidal silica sol was applied to control the anti-slip property by spraying on kraft paper. Two kinds of nano-colloidal silica sol which have cationic and anionic charge were applied in kraft paper, and the friction and physical strength properties of kraft paper were investigated. The application of colloidal silica sol on wet web in wet-end process by spraying method was tried to improve the friction property and to avoid the general problems of machine contaminations caused by the scattering of sprayed silica particles in dryer part. The physical properties of sheet were also improved by the application of wet web spraying method, and the optimum conditions of wet web spraying operation were closely related with the conditions of pH and electrical charge of wet web and silica sol.

• International Journal of Concrete Structures and Materials
• /
• 제10권2호
• /
• pp.125-142
• /
• 2016

An overall review of the structural behaviors of ultra-high-performance fiber-reinforced concrete (UHPFRC) elements subjected to various loading conditions needs to be conducted to prevent duplicate research and to promote its practical applications. Thus, in this study, the behavior of various UHPFRC structures under different loading conditions, such as flexure, shear, torsion, and high-rate loads (impacts and blasts), were synthetically reviewed. In addition, the bond performance between UHPFRC and reinforcements, which is fundamental information for the structural performance of reinforced concrete structures, was investigated. The most widely used international recommendations for structural design with UHPFRC throughout the world (AFGC-SETRA and JSCE) were specifically introduced in terms of material models and flexural and shear design. Lastly, examples of practical applications of UHPFRC for both architectural and civil structures were examined.

• 한국분말재료학회지
• /
• 제4권4호
• /
• pp.275-282
• /
• 1997

Sintered oilless bearing using fluid-dynamic mechanism for high revolution of over 10,000 rpm was developed by Powder metallurgy Process. Developed bearing was composed of Fe-40-60%Cu of which inner face consisted of six-regular-prominence-and-depression. Inner face has controlled pore size and amount according to application. Jitter and friction properties were tested under assembled conditions with housing and motor. Bearing-own properties and precision were also tested because of demanding for assembled properties. Measurement-skill as well as mould-production-skill were investigated for the precision of bearing. Final precision reached 2 ${\mu}m$ in inner diameter tolerance and 5 ${\mu}m$ in coaxiality under assembled conditions.

• 대한수학회보
• /
• 제52권3호
• /
• pp.789-807
• /
• 2015

We propose coincidence and common fixed point results for a quadruple of self mappings satisfying common limit range property and weakly compatibility under generalized ${\Phi}$-contractive conditions i Non-Archimedean Menger PM-spaces. As examples we exhibit different types of situations where these conditions can be used. A common fixed point theorem for four finite families of self mappings is presented as an application of the proposed results. The existence and uniqueness of solutions for certain system of functional equations arising in dynamic programming are also presented as another application.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.440-449
• /
• 2007

Recently, researches for side resistances of drilled shafts considering socket roughness have been conducted actively. In order for these researches, roughness measurement devices using laser sensor were developed by two research groups. The devices were only applied in boreholes with dry conditions. In this research, a roughness measurement devices using the laser sensor (BKS-LRPS) was developed, which could apply in wet conditions and also measure vertical offsets of drilled shafts. In addition, the application of the laser sensor to the geotechnical engineering proposed in this paper.

• The Plant Pathology Journal
• /
• 제25권2호
• /
• pp.189-192
• /
• 2009

The effect of plant extracts of eucalyptus (Eucalyptus chamadulonsis), garlic (Allium sativium), marigold (Tagetes erecta) and neem (Azadirachta indica) and essential oils were tested on the suppression of root-knot nematode Meloidogyne incognita under greenhouse and field conditions. In vitro study, all tested treatments had nematicidal effect on nematode juveniles after 24 and 48 hours from exposures. The highest percentage of nematode mortality was achieved by application of neem extract (65.4%), essential oils (64.4%) and marigold extract (60.5%), followed by garlic and eucalyptus extracts (38.7-39.5%). Under greenhouse and field conditions, neem extract and essential oils treatments were more effective in reducing population numbers of the M. incognita in soil and root gall index compared to other treatments. In field experiments, the maximum protection of tomato plant against root-knot nematode was obtained by application of neem and essential oil treatments, 44.2 and 32.6%, respectively.

• 산업기술연구
• /
• 제35권
• /
• pp.59-65
• /
• 2015

As the fossil fuels are depleted nowadays, development of alternative energies is absolutely required in the world. Efficient production of hydrogen by water-splitting using solar energy can be one of the methods to solve the global energy and environmental problems. But this method has a problem of low conversion efficiency. The application of graphene can be one method to help increase the conversion efficiency. For this reason, mass production of high quality graphene is required. In this study, we prepared graphene using the chemical exfoliation method. We applied the Hummer's method and Tour's method to oxidize the graphite and could get the different Graphene Oxide(GO) from different process conditions. We also tried to convert the GO to graphene by thermal reduction and could remove functional group of GO effectively. The control of oxidation conditions was quite important to obtain the high quality graphene.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1212-1216
• /
• 2014

This study aims to find out the best anode location for buried pipelines. Numerical simulation program known as CATPRO (Elsyca, Belgium) were used for confirming the best location of anodes and the effects of impressed current cathodic protection system. Applied conditions for numerical simulation were similar to on-site environmental conditions for optimal application of cathodic protection system. Used criterion of cathodic protection was NACE SP 0169, which describes that minimum requirement for cathodic protection is -850mV vs. CSE. Various layouts for anodes' installation were applied, which were distance between anodes, anode installation location, and applied current. The areas where cathodic protection potential was lower than -850mV vs. CSE was limited up to 50m from anode installation locations. It was founded numerical analysis obtain cost-effective and efficient cathodic protection methods before design and application the impressed cathodic protection system to on-site environment.

• Journal of Biosystems Engineering
• /
• 제23권2호
• /
• pp.115-124
• /
• 1998

Over- and under-application of pesticides to crops have recently become main concerns regarding the environment conservation, product cost and firmer's safety. Thus, a uniform and optimal application method of pesticides was needed. The objective of study was to evaluate flow compensating characteristics of a variable flow control system for a boom sprayer using a laboratory setup. At the most variable conditions, the control system was acceptable with the flowrate control strategy. However, the sprayer control system became unstably fluctuating at the long execution time with small tolerance because of the constant valve on-time. This problem was solved by employing a variable on-time control. The optimal values for the damping ratio and the execution time were 2 and 1.0 sec, respectively, with the tolerances less than 3%. The performance of the control system at the optimal conditions were the response time of 3.8sec and the absolute steady-state error of 0.5% with the stable RCV and ROS ( < 1.0).

• 한국항공운항학회지
• /
• 제17권1호
• /
• pp.46-51
• /
• 2009

This paper presents results from field studies carried out to monitor off-target droplet movement of endosulfan insecticide applied to the Korea chestnut tree area. As a results, mean airborne drift values were recorded 25m as average from downwind of a single flight line(sample line) in mountain terrain and mean effective swath width was recorded 19.5m as average in a plain. In terms of characteristics of geography of Korea aerial application is mainly carried out in mountain terrain. The equipment, weather conditions, and appropriate aerial spray technic are required for effective aerial application. In particular, the pilot can get effective results when he only sprays with consideration of environment factors since there is much turbulence in mountain terrain. Eventually, the most effective factor of droplets drift is to estimate the local weather conditions exactly.