• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.541-548
• /
• 2008

Active application of auger-drilled piling is expected in Korea considering its advantage in noise and vibration problems against driven piling and its cost-effectiveness in comparison to the cast in-situ piling. The current design practice being used in Korea is adopted from the Japanese one, however the equipment and construction procedure is modified for the geotechnical conditions and construction circumstances in Korea. Therefore there is an urgent need for the establishment of the rational design criteria for the auger-drilled piling in Korea. As the preliminary work for the establishment, this paper presents the current practice in Korean railway constructions. Design criteria of Korea Railway Network Authority are introduced and its characteristics and the problems are described. Application cases of auger-drilled pile to railway construction are introduced as well.

• Journal of the Korean Statistical Society
• /
• v.19 no.1
• /
• pp.24-44
• /
• 1990

The purpose of this paper is to extend the idea of Tamhane and Bechhofer (1977, 1979) concerning the normal means problem to some general class of distributions. The key idea in Tamhane and Bechhofer is the derivation of the computable lower bounds on the probability of a correct selection. To derive such lower bounds, they used the specific covariance structure of a multivariate normal distribution. It is shown that such lower bounds can be obtained for a class of stochastically increasing distributions under certain conditions, which is sufficiently general so as to include the normal means problem as a special application. As an application of the general theory to the scale parameters problem, a two-stage elimination type procedure for selecting the population associated with the smallest variance from among several normal populations is proposed. The design constants are tabulated and the relative efficiencies are computed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.813-816
• /
• 2004

This study was performed to investigate bonding performance of epoxy resins for repairing of cracks in concrete, as a part of project to establish quality control standard for epoxy resins. In the slant shear strength test for hard and soft type epoxy, hard type was higher about 3 times than soft one. From the results, it is thought that hard type is suitable for load carrying. Injection of epoxy resin in the notch made flexural strength increase about $47\%$ over the specimen that epoxy resin is not injected. There were no differences in bonding performances with viscosity. Application of epoxy resin on the wet concrete surface made slant shear strength decrease about $46\%$, but similar performance to the case of application on the dry surface appeared by using epoxy resin for wet condition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04a
• /
• pp.1-4
• /
• 2004

Recently, because GIS equipment has problems on confidence according to long-time usage, development of diagnosis technique has been importantly recognized. Therefore. measurement and analysis of PD has been generally used much equipment of GIS. But, in case of measurement of PD at field, real trouble signals are difficult to classify noise. Accordingly, a variety of trouble conditions for DS were simulated, and detected signals were analyzed by the application of electrical and mechanical methods. For this anslysis, detected signals were accumulated according to phase-magnitude with the application of Induction sensor, and then we analyzed the characteristics. For the simulation experiment, we made DS for 170kV GIS and analyzed the characteristics of detected singals with the application of neural network algorithm.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.985-987
• /
• 2003

This paper presents a design and characteristics analysis of a SRM drive for EPS application. A rack mounted EPS system is considered in this paper. A conventional driving room space and mechanical structure are suggested in design stage. In the restricted design conditions, motor parameters are determined for sufficient torque and speed. For the smooth torque generation and simple circuit of power system, 12/8 motor drive is considered. With FEM and magnetic circuit analysis, designed motor is simulated to meet the requirement of specifications. Effectiveness of the suggested SRM drive for EPS application is verified by the manufactured prototype motor drive tests.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.575-578
• /
• 2003

Recently, because GIS equipment has problems on confidence according to long-time usage, development of diagnosis technique has been importantly recognized. Therefore. measurement and analysis of PD has been generally used much equipment of GIS. But, in case of measurement of PD at field, real trouble signals are difficult to classify noise. Accordingly, a variety of trouble conditions for DS were simulated, and detected signals were analyzed by the application of electrical and mechanical methods. For this analysis, detected signals were accumulated according to phase-magnitude with the application of Induction sensor, and then we analyzed the characteristics. For the simulation experiment, we made DS for 170kV GIS and analyzed the characteristics of detected singals with the application of neural network algorithm.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.214-220
• /
• 2005

Errors may occur due to analysis methods and water quality during the application of the on-line particle counter In water treatment process. Errors caused by analysis methods include particle destruction by shear force due to inflow speed and tube friction, as well as interruption by screening, bubbles and contaminants. Since errors happen frequently because of these factors, it is necessary to examine and evaluate such errors during the application of a particle counter. Errors can be large due to screening and bubbles. Measurement values are effective for water analysis after filtration process. However, because of screening, only measurement values for particles above $7{\mu}m$ are valid for water with a turbidity between 3-10NTU. As particle numbers around $10{\mu}m$ increase a lot after ozone treatment, sufficient pretreatment process is necessary. Physical conditions should keep stable for inflow to decrease errors caused by shear force.

• Nuclear Engineering and Technology
• /
• v.45 no.4
• /
• pp.565-572
• /
• 2013

The fabrication methods and requirements of the fiber, interphase, and matrix of nuclear grade $SiC_f/SiC$ composites are briefly reviewed. A CVI-processed $SiC_f/SiC$ composite with a PyC or $(PyC-SiC)_n$ interphase utilizing Hi-Nicalon Type S or Tyranno SA3 fiber is currently the best combination in terms of the irradiation performance. We also describe important material issues for the application of SiC composites to LWR fuel cladding. The kinetics of the SiC corrosion under LWR conditions needs to be clarified to confirm the possibility of a burn-up extension and the cost-benefit effect of the SiC composite cladding. In addition, the development of end-plug joining technology and fission products retention capability of the ceramic composite tube would be key challenges for the successful application of SiC composite cladding.

• Educational Technology International
• /
• v.24 no.1
• /
• pp.1-27
• /
• 2023

This study aimed to examine an augmented reality-based teaching simulation in a mobile application. We examined how AR-enabled interactions affect users' perceived scenario usefulness and avatar realism. The participants were forty-six undergraduate students. We randomly grouped them into two conditions: AR and Non-interactive video groups with equal sample sizes. This study employed an experimental design approach with a one-way multivariate analysis of variance with repeated measures. The independent variable is the presence/absence of AR interaction with a mobile application. The dependent variables were avatar realism and scenario usefulness. The measures explored how the student avatar's emotional intensity in a scenario influences user perception. The results showed that participants in the AR-interaction group perceived avatar realism significantly higher than those in the non-interactive video group. Also, participants perceived the high emotional intensity scenario (aggression toward peers) to be significantly higher usefulness than the low emotional intensity scenario (classroom disruption).

• Nuclear Engineering and Technology
• /
• v.55 no.10
• /
• pp.3515-3524
• /
• 2023

A reinforcement learning framework is proposed for the control problem of outlet steam pressure of the once-through steam generator(OTSG) in this paper. The double-layer controller using Proximal Policy Optimization(PPO) algorithm is applied in the control structure of the OTSG. The PPO algorithm can train the neural networks continuously according to the process of interaction with the environment and then the trained controller can realize better control for the OTSG. Meanwhile, reinforcement learning has the characteristic of difficult application in real-world objects, this paper proposes an innovative pretraining method to solve this problem. The difficulty in the application of reinforcement learning lies in training. The optimal strategy of each step is summed up through trial and error, and the training cost is very high. In this paper, the LSTM model is adopted as the training environment for pretraining, which saves training time and improves efficiency. The experimental results show that this method can realize the self-adjustment of control parameters under various working conditions, and the control effect has the advantages of small overshoot, fast stabilization speed, and strong adaptive ability.