• Journal of Chest Surgery
• /
• v.37 no.10
• /
• pp.856-860
• /
• 2004

Interrupted aortic arch with concomitant intracardiac defects is a rare congenital anomaly that has an unfavorable natural course. We report a successful staged operation of interrupted aortic arch with apical muscular ventricular septal defect associating esophageal atresia with tracheoesophageal fistula in a 3-day-old neonate weighing 2.6 kg. We repaired esophageal atresia through the right thoracotomy and subsequently performed extended end-to-end anastomosis of the aortic arch with pulmonary artery banding through the left thoracotomy at same operation. The apical muscular VSD was repaired 87 day after first operation. The patient required multiple additional interventions before closure of the apical muscular ventricular septal defect, such as pyloromyotomy for idiopathic hypertrophic pyloric stenosis, anterior aortopexy for airway obstruction, and balloon aortoplasty for residual coarctation. She is now doing well.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.1
• /
• pp.52-59
• /
• 2006

Purpose: The purpose of this study was to evaluate the influence of apical-coronal implant position on the stress distribution after occlusal and oblique loading. Materials and Methods: The cortical and cancellous bone was assumed to be isotropic, homogeneous, and linearly elastic. The implant was apposed to cortical bone in the crestal region and to cancellous bone for the remainder of the implant-bone interface. The cancellous core was surrounded by 2-mm-thick cortical bone. An axial load of 200 N was assumed and a 200-N oblique load was applied at a buccal inclination of 30 degrees to the center of the pontic and buccal cusps. The 3-D geometry modeled in Iron CAD was interfaced with ANSYS. Results: When only the stress in the bone was compared, the minimal principal stress at load Points A and B, with a axial load applied at 90 degrees or an oblique load applied at 30 degrees, for model 5. The von Mises stress in the screw of model 5 was minimal at Points A and B, for 90- and 30-degree loads. When the von Mises stress of the abutment screw was compared at Points A and B, and a 30-degree oblique load, the maximum principal stress was seen with model 2, while the minimum principal stress was with model 5. In the case of implant, the model that received maximum von Mises stress was model 1 with the load Point A and Point B, axial load applied in 90-degree, and oblique load applied in 30-degree. Discussion and Conclusions: These results suggests that implantation should be done at the supracrestal level only when necessary, since it results in higher stress than when implantation is done at or below the alveolar bone level. Within the limited this study, we recommend the use of supracrestal apical-coronal positioning in the case of clinical indications.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.33.1-33.7
• /
• 2019

Background: The concept of the ideal morphology for the alveolar bone form is an important element to reconstruct or restore the in maximizing esthetic profile and functional alveolar bone restoration. The purpose of this preliminary study is to evaluate the normal alveolar bone structure to provide the standard reference and guide template for use in diagnosing for implant placement, determining the correct amount of bone augmentation in actual clinical practice and producing prostheses based on three-dimensional imaging assessment of alveolar bone. Methods: This study was included 11 men and 11 women (average age, 22.6 and 24.5 years, respectively) selected from among 127 patients. The horizontal widths of alveolar bone of maxilla and mandible were measured at the crestal, mid-root, and root apex level on MDCT (multi-detector computed tomography) images reconstructed by medical imaging software. In addition, tooth dimensions of the central incisors, canines, second premolars, and first molars of maxilla and mandible, including the horizontal width of the interdental alveolar bone crest, were also measured and statistically analyzed. Results: The horizontal alveolar bone width of the palatal side of maxilla showed a distinct increment from the alveolar bone crest to the apical region in both anterior and posterior areas. The average widths of the maxillary alveolar ridge were as follows: central incisor, 7.43 mm; canine, 8.91 mm; second premolar, 9.57 mm; and first molar, 12.38 mm. The average widths of the mandibular alveolar ridge were as follows: central incisor, 6.21 mm; canine, 8.55 mm; second premolar, 8.45 mm; and first molar, 10.02 mm. In the buccal side, the alveolar bone width was not increased from the crest to the apical region. The horizontal alveolar bone width of an apical and mandibular border region was thinner than at the mid-root level. Conclusions: The results of the preliminary study are useful as a clinical guideline when determining dental implant diameter and position. And also, these measurements can also be useful during the production of prefabricated membranes and customized alveolar bone scaffolds.

• The Journal of the Korean dental association
• /
• v.10 no.8
• /
• pp.523-527
• /
• 1972

All patients admitted to dept. of Oral Surgery, infirmary Dental Hospital, Kyung Hee University with complaints of Apical lesions of Anterior teeth. The authors have treated the inflammatory lesions by the Apicoectomies under local anesthesia.

• Journal of Korean Dental Science
• /
• v.3 no.2
• /
• pp.12-19
• /
• 2010

Despite the latest advancement made in its techniques and devices/apparatuses and the resulting rising expectation in the field of dental surgery, apicoectomy performed in the molar teeth remains a technical challenge and lacks evidence substantiated by long-term follow-up studies. This study sought to investigate the treatment outcomes and post-operative success rate in the root-end resected molar teeth accompanied by a high level of surgical risks due to their close proximity to the mandibular canal and maxillary sinus. A total of 68 patients who received treatment at Livingwell Dental Hospital between 2004 and 2010 and underwent apical surgery in the maxillary or mandibular molar area were enrolled in this study. A total of 160 roots collected from 75 molar teeth were subjected to surgical endodontic treatment and subsequently evaluated clinically as well as radiographically. Based on the results of the study, the clinical success rate was found to be 78.8% in cases involving radiological healing. Likewise, 90.7% of the roots recorded a robust clinical survival rate, but with incomplete healing as shown by radiography. The results indicate that the apical procedure involving molar teeth is a prognosis-friendly method that promises positive outcomes and higher success rate based on long-term follow-up observations.

• Restorative Dentistry and Endodontics
• /
• v.45 no.3
• /
• pp.27.1-27.9
• /
• 2020

Apical surgery for a mandibular molar is still challenging for many reasons. This report describes the applications of computer-guided cortical 'bone-window technique' using piezoelectric saws that prevented any nerve damage in performing endodontic microsurgery of a mandibular molar. A 49-year-old woman presented with gumboil on tooth #36 (previously endodontically treated tooth) and was diagnosed with chronic apical abscess. Periapical lesions were confirmed using cone-beam computed tomography (CBCT). Endodontic microsurgery for the mesial and distal roots of tooth #36 was planned. Following the transfer of data of the CBCT images and the scanned cast to an implant surgical planning program, data from both devices were merged. A surgical stent was designed, on the superimposed three-dimensional model, to guide the preparation of a cortical window on the buccal side of tooth #36. Endodontic microsurgery was performed with a printed surgical template. Minimal osteotomy was required and preservation of the buccal cortical plate rendered this endodontic surgery less traumatic. No postoperative complications such as mental nerve damage were reported. Window technique guided by a computer-aided design/computer-aided manufacture based surgical template can be considerably useful in endodontic microsurgery in complicated cases.

• Journal of Chest Surgery
• /
• v.37 no.2
• /
• pp.166-172
• /
• 2004

When compare with blebectomy or bullaectomy simply and pleurodesis together in treatment of primary spontaneous pnevmthorax, the later has been realized as the method that can reduce the recurrent rate after surgical operation. Therefore, in this study, we compared the merits and demerits of the clinical result of chemical pleurodesis that use Talcum powder in pleurodesis and mechanical pleurodesis that use apical pleurectomy and analyzed the reappearance rate etc. Material and Method: The Pleurodesis through the apical pleurectomy and talc powder insufflation had been used as secondary procedure after blebectomy of spontaneous pneumothorax from January 1, 2000 to June 30, 2002. This study consisted of a retrospective review of 68 patients who were treated with apical pleurectomy, and 84 patients treated with talc powder insufflation. We compaired the apical pleurectomy and talc powder insufflation in terms of age, sex, cause of operation, number of used autosuture staple, tine duration of procedure after blebectomy, severity of pain and complication after operation, postoperative air leakage period, duration of chest tube insertion, hospitalization, and recurrence rate of pneumothorax. Result: Time required for secondary procedure was longer in apical pleurectomy than talc powder insufflation. Postoperative pain was more severe in talc powder insufflation than apical pleurectomy. Otherwise there was no significant difference between two methods. Conclusion: Although Talc powder insufflation is more convenient than apical pleurectomy, the difference is not large and, the severity of postoperative pain is worse in talc powder insufflation. Therefore apical pleurectomy can be recommended for the secondary surgical procedure after blebectomy of primary spontaneous pneumothorax can be recommended.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.41
• /
• pp.28.1-28.1
• /
• 2019

• Restorative Dentistry and Endodontics
• /
• v.39 no.4
• /
• pp.276-281
• /
• 2014

Objectives: The purpose of this study was to compare the cutting efficiency of a newly developed microprojection tip and a diamond-coated tip under two different engine powers. Materials and Methods: The apical 3 mm of each root was resected, and root-end preparation was performed with upward and downward pressure using one of the ultrasonic tips, KIS-1D (Obtura Spartan) or JT-5B (B&L Biotech Ltd.). The ultrasonic engine was set to power-1 or -4. Forty teeth were randomly divided into four groups: K1 (KIS-1D / Power-1), J1 (JT-5B / Power-1), K4 (KIS-1D / Power-4), and J4 (JT-5B / Power-4). The total time required for root-end preparation was recorded. All teeth were resected and the apical parts were evaluated for the number and length of cracks using a confocal scanning micrscope. The size of the root-end cavity and the width of the remaining dentin were recorded. The data were statistically analyzed using two-way analysis of variance and a Mann-Whitney test. Results: There was no significant difference in the time required between the instrument groups, but the power-4 groups showed reduced preparation time for both instrument groups (p < 0.05). The K4 and J4 groups with a power-4 showed a significantly higher crack formation and a longer crack irrespective of the instruments. There was no significant difference in the remaining dentin thickness or any of the parameters after preparation. Conclusions: Ultrasonic tips with microprojections would be an option to substitute for the conventional ultrasonic tips with a diamond coating with the same clinical efficiency.

• Journal of Chest Surgery
• /
• v.22 no.5
• /
• pp.880-883
• /
• 1989

Congenital esophagobronchial fistula without esophageal atresia is rare, usually has an insidious clinical course, so it usually diagnosed in adulthood. A esophagogram showed a esophagobronchial fistula between diverticulum at the middle third of the esophagus and just proximal site of apical segmental bronchus of left lower lobar bronchus. It belonged to type I of Braimbridges classification for congenital esophago-bronchial fistula. Esophageal diverticulectomy, fistulectomy and left lower lobectomy were done and postoperative course was uneventful.